Uploaded November 2026 | Updated November 2026, 15 hours ago
How to Fix a Muddy or Boxy Mic With EQ
THE SETTINGS IN THIS VIDEO
Muddy: Peak band at 250 hertz, +10 dB, Q 1.
Boxy: Peak band at 600 hertz, +10 dB, Q 1.4.
Nasal: Peak band at 1,100 hertz, +10 dB, Q 1.4.
Harsh: Peak band at 3,200 hertz, +10 dB, Q 1.
Muffled: High Shelf band at 2,500 hertz, -14 dB.
These are much bigger than a real problem, so they're easy to hear. In the first sentence they go even further: +18 dB on the Peak bands, and -18 dB at 1,500 hertz for muffled.
PEAK AND HIGH SHELF
A Peak band changes the sound around one spot. A High Shelf changes everything above its frequency.
Q
In Patchd's EQ, Q goes from 0.1 to 10, and a higher number is narrower. The search in this video uses Q 4.
THE FIX
Once you find the spot, turn the Gain below zero so that spot gets quieter. Gain goes from -18 to +18 dB. On my voice the spot was 328 hertz, and I cut it by 2 dB. Yours will be somewhere else.
MUFFLED
If your voice is muffled, you don't need one narrow spot. Make the whole 1,500 to 5,000 hertz range 1 or 2 dB louder.
MOVE SLOWLY
A big narrow boost can make a lot of spots sound bad, and sweeping for too long changes what you hear. Go slowly, and only fix the spot where your own problem gets worse.
YOUR ROOM
EQ can't fully fix a boxy sound that comes from your room or where your mic sits.
The EQ is in Patchd's mixer, and it's in Free. Click the link in bio to download for free.
#eq #micsetup #audioengineering #streamingtips #vocalmixing #podcasting
How to Fix a Muddy or Boxy Mic With EQ
THE SETTINGS IN THIS VIDEO
Muddy: Peak band at 250 hertz, +10 dB, Q 1.
Boxy: Peak band at 600 hertz, +10 dB, Q 1.4.
Nasal: Peak band at 1,100 hertz, +10 dB, Q 1.4.
Harsh: Peak band at 3,200 hertz, +10 dB, Q 1.
Muffled: High Shelf band at 2,500 hertz, -14 dB.
These are much bigger than a real problem, so they're easy to hear. In the first sentence they go even further: +18 dB on the Peak bands, and -18 dB at 1,500 hertz for muffled.
PEAK AND HIGH SHELF
A Peak band changes the sound around one spot. A High Shelf changes everything above its frequency.
Q
In Patchd's EQ, Q goes from 0.1 to 10, and a higher number is narrower. The search in this video uses Q 4.
THE FIX
Once you find the spot, turn the Gain below zero so that spot gets quieter. Gain goes from -18 to +18 dB. On my voice the spot was 328 hertz, and I cut it by 2 dB. Yours will be somewhere else.
MUFFLED
If your voice is muffled, you don't need one narrow spot. Make the whole 1,500 to 5,000 hertz range 1 or 2 dB louder.
MOVE SLOWLY
A big narrow boost can make a lot of spots sound bad, and sweeping for too long changes what you hear. Go slowly, and only fix the spot where your own problem gets worse.
YOUR ROOM
EQ can't fully fix a boxy sound that comes from your room or where your mic sits.
The EQ is in Patchd's mixer, and it's in Free. Click the link in bio to download for free.
#eq #micsetup #audioengineering #streamingtips #vocalmixing #podcasting










