Uploaded June 2020 | Updated September 2026, 2 weeks ago
Learn how to create bendable 3D printed parts in Fusion 360. Be sure to stick around to the end where I demo how to use the Motions links to simulate the bends AND the use of the Interference command to double-check the parts before printing.
TIMESTAMPS
0:00 - Creating Bendable 3D Prints in Fusion 360
1:54 - Sketching the zigzag shape
3:49 - Extruding the shape
4:17 - Rounding the edges
4:29 - Creating the pin
5:45 - Creating the hole
7:28 - Extrude cutting the inner cavity
8:18 - Mirroring and joining bodies
9:00 - Adding the remaining fillets
10:30 - Section analysis tool
11:00 - Rectangular pattern tool
11:35 - Subassembly and as-built joints
12:37 - Motion link
14:00 - Interference command
TUTORIAL RESOURCES
1. This tutorial's resource page ➞ ProductDesignOnline.com
2. View my checklists for Fusion 360 beginners ➞ bit.ly/f360checklist
3. Join us on Patreon ➞ patreon.com/productdesignonline
TOP FUSION 360 PLAYLISTS
bit.ly/learn-fusion360
bit.ly/woodworker-playlist
bit.ly/3D-printing-playlist
bit.ly/sculpt-playlist
SUBSCRIBE for more high-quality Fusion 360 tutorials! ➞ bit.ly/sub-right-now
________________________________
MY PREMIUM COURSES
2 Months FREE ➞ bit.ly/courses-free
QUESTION
Have a question about Fusion 360? Post it in the comments section of this video!
HELP THE COMMUNITY GROW
Speak another language? Submit a closed captions translation and help me continue to make CAD education more accessible ➞ bit.ly/translate-this-video
FACEBOOK GROUP
Join and share your projects with the growing community of Hobbyists using Fusion 360 ➞ fb.com/groups/fusion360hobbyists
DISCLAIMER
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps you support the channel at no extra cost to you and allows me to continue to make videos like this.
—
#Fusion360 #ProductDesignOnline
Learn how to create bendable 3D printed parts in Fusion 360. Be sure to stick around to the end where I demo how to use the Motions links to simulate the bends AND the use of the Interference command to double-check the parts before printing.
TIMESTAMPS
0:00 - Creating Bendable 3D Prints in Fusion 360
1:54 - Sketching the zigzag shape
3:49 - Extruding the shape
4:17 - Rounding the edges
4:29 - Creating the pin
5:45 - Creating the hole
7:28 - Extrude cutting the inner cavity
8:18 - Mirroring and joining bodies
9:00 - Adding the remaining fillets
10:30 - Section analysis tool
11:00 - Rectangular pattern tool
11:35 - Subassembly and as-built joints
12:37 - Motion link
14:00 - Interference command
TUTORIAL RESOURCES
1. This tutorial's resource page ➞ ProductDesignOnline.com
2. View my checklists for Fusion 360 beginners ➞ bit.ly/f360checklist
3. Join us on Patreon ➞ patreon.com/productdesignonline
TOP FUSION 360 PLAYLISTS
bit.ly/learn-fusion360
bit.ly/woodworker-playlist
bit.ly/3D-printing-playlist
bit.ly/sculpt-playlist
SUBSCRIBE for more high-quality Fusion 360 tutorials! ➞ bit.ly/sub-right-now
________________________________
MY PREMIUM COURSES
2 Months FREE ➞ bit.ly/courses-free
QUESTION
Have a question about Fusion 360? Post it in the comments section of this video!
HELP THE COMMUNITY GROW
Speak another language? Submit a closed captions translation and help me continue to make CAD education more accessible ➞ bit.ly/translate-this-video
FACEBOOK GROUP
Join and share your projects with the growing community of Hobbyists using Fusion 360 ➞ fb.com/groups/fusion360hobbyists
DISCLAIMER
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps you support the channel at no extra cost to you and allows me to continue to make videos like this.
—
#Fusion360 #ProductDesignOnline
