Product Design Online | Create Assemblies with Joints in Fusion 360 | Day 23 of Learn Fusion 360 in 30 Days - 2023 EDITION @ProductDesignOnline | Uploaded 8 months ago | Updated 2 hours ago
Learn how to assemble designs in Autodesk Fusion. We'll discuss using the As-Built Joint command to create joints and motion with designs that are built in place, including imported designs. This demo uses the 06_tripod demo file included with your Autodesk Fusion install.
New to Fusion 360? This is a brand new 2023 version of Day #23 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course online!
Resource Page ➞ productdesignonline.com/d23
Full course on YouTube: bit.ly/30daysUpdated
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist
Learn faster with Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses
SUPPORT KEVIN'S TUTORIALS
Donate $10 ➞ paypal.com/paypalme/productdesignonline/10
Patreon ➞ patreon.com/productdesignonline
Single Donation ➞ buymeacoffee.com/pdo
TIMESTAMPS
00:00 - Intro to Joints and Assemblies in Autodesk Fusion
00:15 - Open and Save the Tripod Demo file from the Data Panel
01:25 - Mates equivalent in Autodesk Fusion 360
01:43 - Common Assembly approaches in Autodesk Fusion
03:40 - Joints vs As-Built Joints in Autodesk Fusion
04:21 - Creating the first As-Built Joint on the tripod leg
05:36 - Defining Joint Motion Limits in Autodesk Fusion
06:45 - Joints with copied parts in Autodesk Fusion
08:06 - Adding the remaining Joints to the tripod legs and stand
10:44 - Creating a Ball Joint in Autodesk Fusion 360
11:23 - Testing your Joint motion in Autodesk Fusion
—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion #cad #autodesk
Learn how to assemble designs in Autodesk Fusion. We'll discuss using the As-Built Joint command to create joints and motion with designs that are built in place, including imported designs. This demo uses the 06_tripod demo file included with your Autodesk Fusion install.
New to Fusion 360? This is a brand new 2023 version of Day #23 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course online!
Resource Page ➞ productdesignonline.com/d23
Full course on YouTube: bit.ly/30daysUpdated
CHECKLIST FOR BEGINNERS ➞ http://bit.ly/f360checklist
Learn faster with Kevin's Fusion 360 Masterclass at https://ProductDesignOnline.com/courses
SUPPORT KEVIN'S TUTORIALS
Donate $10 ➞ paypal.com/paypalme/productdesignonline/10
Patreon ➞ patreon.com/productdesignonline
Single Donation ➞ buymeacoffee.com/pdo
TIMESTAMPS
00:00 - Intro to Joints and Assemblies in Autodesk Fusion
00:15 - Open and Save the Tripod Demo file from the Data Panel
01:25 - Mates equivalent in Autodesk Fusion 360
01:43 - Common Assembly approaches in Autodesk Fusion
03:40 - Joints vs As-Built Joints in Autodesk Fusion
04:21 - Creating the first As-Built Joint on the tripod leg
05:36 - Defining Joint Motion Limits in Autodesk Fusion
06:45 - Joints with copied parts in Autodesk Fusion
08:06 - Adding the remaining Joints to the tripod legs and stand
10:44 - Creating a Ball Joint in Autodesk Fusion 360
11:23 - Testing your Joint motion in Autodesk Fusion
—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #fusion #cad #autodesk
