Beginners Guide to Soldering Electronics Part 3: Surface Mount Soldering @BranchusCreations
Beginners Guide to Soldering Electronics Part 3: Surface Mount Soldering  @BranchusCreations
Uploaded August 2023 | Updated November 2026, 3 days ago
Thanks to channel sponsor, PCBWay: pcbway.com

If you've mastered through-hole soldering and now want to give surface mount soldering a try, this video is for you. It features practical demonstrations of how to solder different surface mount components and will have you surface mount soldering like a pro.

Beginner's Guide to Soldering Electronics Part 1
youtu.be/M2Jf8cebwCs

Beginner's Guide to Soldering Electronics Part 2
youtu.be/BPuH1Z2npoQ

CHAPTERS:
01:18 Equipment
05:03 Why solder doesn't stick
06:04 SMD resistors, ceramic capacitors and inductors
09:12 Surface mount LEDs
09:48 SOT-23 transistors and diodes
10:27 DPAK
11:35 SOIC and SOP
14:19 Micro USB connector
16:57 Micro SD card socket
19:59 Surface mount electrolytic capacitors
21:04 Tantalum capacitors and diodes
22:21 QFP
25:57 QFN
29:31 PLCC
32:33 Cleaning
33:55 Something's missing…

#soldering #electronics #tutorial

———— CHANNEL SUPPORT ————

Patreon: patreon.com/branchuscreations
Donations: paypal.me/branchus

Some links below are affiliate links. If you purchase through them, I may earn a small commission at no additional cost to you. Some manufacturers also provide discount codes for Branchus Creations viewers. As an Amazon Associate I earn from qualifying purchases.

T-SHIRTS
I buy all of my wacky t-shirts from Qwertee.
Discount code: BranchusCreations to get £1/€1/$1 off your order: bit.ly/3OrJZkT

———— TOOLS & EQUIPMENT ————

SOLDERING STATION (6% off with code BRANCHUS6):
FNIRSI DWS-200: fnirsi.com/products/dws-200?sca_ref=8660324.n0rV2W4rWG

HOT AIR STATION:
Quick 861DW: amzn.to/4y46sZL

SOLDER:
Kester 63/37 0.5mm diameter: amzn.to/4y6gaLf

FLUX (10% off with code BRANCHUS):
StirriASM-TF: stirri.com/products/stirri-asm-tf

SOLDER WICK (BRAID):
Goot Wick 2mm: amzn.to/4zmWkMP

MULTIMETER (15% off storewide with code BC15):
Kaiweets HT118E: tinyurl.com/msw2tunz

MULTIMETER/OSCILLOSCOPE (6% off with code BRANCHUS6):
FNIRSI 2C53T: fnirsi.com/products/2c53t?sca_ref=8660324.n0rV2W4rWG

TWEEZERS:
Hakko CHP 3-SA: amzn.to/2NqkhPz

ULTRASONIC CLEANERS:
Vevor ultrasonic cleaner range (5% off storewide with code VVMH5%OFF)
I use the 10L cleaner for smaller PCBs and the 30L cleaner for the larger ones.
AU site: https://s.vevor.com/bfP7q7
US site: https://s.vevor.com/bfP7uN
EU site: https://s.vevor.com/bfQaMb

FUME EXTRACTOR:
Vevor fume extractor range (5% off storewide with code VVMH5%OFF)
I use the Vevor 195 CFM, 150W fume extractor. Budget alternatives available.
US site: https://s.vevor.com/bfQ2CJ
EU site: https://s.vevor.com/bfQ2CR
AU site: https://s.vevor.com/bfQ1Cy
CA site: https://s.vevor.com/bfQ2C5

C245 Soldering cartridges: amzn.to/4yIzlvU
C245-C2 Soldering cartridge tip (most used): amzn.to/47PjTSB
Microscope: amzn.to/2HnSI5H
Microscope camera: Custom-modified Logitech c920 webcam with AmScope FMA050 adapter
Budget alternative microscope: amzn.to/2PmRagt
Budget alternative hot air rework: tinyurl.com/2pnxvrwd
28 AWG enamelled magnet wire (thick): amzn.to/4dvPkou
34 AWG enamelled magnet wire (med): amzn.to/4dNFkHt
40 AWG enamelled magnet wire (thin): amzn.to/4AXoVtG
Helping hands (third hand): amzn.to/4yH7D2B
Extra long T15 Torx driver: amzn.to/4yNx8iK
UV Solder mask: amzn.to/4yHCaNR
Swann Morton curved scalpel blades: amzn.to/2oN7qNn
No. 3 Scalpel Handle: amzn.to/2ngcx85
Kapton heat resistant tape: amzn.to/4ziYTzn
Beginners Guide to Soldering Electronics Part 3: Surface Mount SolderingAnother Live Repair StreamMore Recapping! [Live]Repairing a battery-bombed Macintosh IIciApple II Joystick Revival: Building a Retro Classic!Fixing distorted corners in Final Cut Pros shape maskBringing a Macintosh IIsi back to lifeTinker Different Forum Tour + Q&AResuscitating a dead Macintosh SERepairing some barn-find vintage Macs - Part 1 [LIVE]Fixing Torn Pads on a Macintosh SE/30 Logic Board [LIVE]Tomlov DM602 Digital Microscope Unboxing and Review
Branchus Creations |

Beginner's Guide to Soldering Electronics Part 3: Surface Mount Soldering

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER