Uploaded June 2019 | Updated September 2026, 2 hours ago
My new 4" racing frame. This bad boy has 5mm thick boomerang arms so is a. It of a tough nut. When using the top plate it's ROCK SOLID. When using the canopy without any bracing there is only a slight bit of twist in the 3mm bottom plate. A new canopy has been designed so the top plate can actually be used as a brace to make this frame solid regardless.
It has 20x20 fc mounting and m2 9mm motor mounting. Canopy fits an 19mm micro camera.
With my current build its 169g without lipo.
You can get the frame from here...
armattanproductions.com/pages/kit_detail/2345
In this build I have a bruised and batter 14month old f440 stack (gyro and esc not the best now)
Emax 1606 4000kv
Gemfan 4052 flash props
Foxeer micro monter
Fsd600w vtx
Xm+ rx
Tattu 850mah 4s. Getting upto 4 min flying like this.
My new 4" racing frame. This bad boy has 5mm thick boomerang arms so is a. It of a tough nut. When using the top plate it's ROCK SOLID. When using the canopy without any bracing there is only a slight bit of twist in the 3mm bottom plate. A new canopy has been designed so the top plate can actually be used as a brace to make this frame solid regardless.
It has 20x20 fc mounting and m2 9mm motor mounting. Canopy fits an 19mm micro camera.
With my current build its 169g without lipo.
You can get the frame from here...
armattanproductions.com/pages/kit_detail/2345
In this build I have a bruised and batter 14month old f440 stack (gyro and esc not the best now)
Emax 1606 4000kv
Gemfan 4052 flash props
Foxeer micro monter
Fsd600w vtx
Xm+ rx
Tattu 850mah 4s. Getting upto 4 min flying like this.
