Uploaded June 2019 | Updated September 2026, 1 hour ago
OK so I stripped it and fitting the mamba mi I stack. Bf4.0.3 wasn't feeling good so reverted back to 3.5.7 dropped the D gains to 20 and throttle is currently scaled at 75%
My new 4" racing frame. This bad boy has 5mm thick boomerang arms so is a. It of a tough nut. When using the top plate it's ROCK SOLID. When using the canopy without any bracing there is only a slight bit of twist in the 3mm bottom plate. A new canopy has been designed so the top plate can actually be used as a brace to make this frame solid regardless.
It has 20x20 fc mounting and m2 9mm motor mounting. Canopy fits an 19mm micro camera.
With my current build its 169g without lipo.
You can get the frame from here...
armattanproductions.com/pages/kit_detail/2345
Diatone mamba mini mk2 stack
Emax 1606 4000kv
HQ4x4.3x3 props
Foxeer micro monter
Fsd600w vtx
Xm+ rx
Tattu 850mah 4s. Getting upto 4 min flying like this.
OK so I stripped it and fitting the mamba mi I stack. Bf4.0.3 wasn't feeling good so reverted back to 3.5.7 dropped the D gains to 20 and throttle is currently scaled at 75%
My new 4" racing frame. This bad boy has 5mm thick boomerang arms so is a. It of a tough nut. When using the top plate it's ROCK SOLID. When using the canopy without any bracing there is only a slight bit of twist in the 3mm bottom plate. A new canopy has been designed so the top plate can actually be used as a brace to make this frame solid regardless.
It has 20x20 fc mounting and m2 9mm motor mounting. Canopy fits an 19mm micro camera.
With my current build its 169g without lipo.
You can get the frame from here...
armattanproductions.com/pages/kit_detail/2345
Diatone mamba mini mk2 stack
Emax 1606 4000kv
HQ4x4.3x3 props
Foxeer micro monter
Fsd600w vtx
Xm+ rx
Tattu 850mah 4s. Getting upto 4 min flying like this.
