Bambu Lab X2D Unboxing: First Look at Bambus NEWEST 3D Printer @3DPrintscape
Bambu Lab X2D Unboxing: First Look at Bambus NEWEST 3D Printer  @3DPrintscape
Uploaded May 2026 | Updated November 2026, 2 hours ago
Unbox and set up the Bambu Lab X2D from scratch: what is included, how the AMS and auxiliary extruder go together, first calibration, and the first print from the printer and Bambu Studio.

Full X2D setup guide, calibration notes, and first-print walkthrough:
3dprintscape.com/bambu-lab-x2d-unboxing-setup-first-look-at-bambus-newest-3d-printer

━━━━━━━━━━━━━━━━━━━━━━
🛒 BAMBU LAB X2D RESOURCES
━━━━━━━━━━━━━━━━━━━━━━
▸ Official Bambu Lab X2D details: bambulab.com
▸ Shop the Bambu Lab X2D on Amazon: geni.us/zzUSaEq
▸ Download Bambu Studio: bambulab.com/en/download/studio

Disclosure: Some links below may be affiliate links. If you buy through them, 3DPrintscape may earn a commission at no extra cost to you.

━━━━━━━━━━━━━━━━━━━━━━
🔗 RELATED BAMBU LAB X2D GUIDES
━━━━━━━━━━━━━━━━━━━━━━
▸ Bambu Lab X2D one-week review: 3dprintscape.com/bambu-lab-x2d-review
▸ Bambu Lab X2D hub: 3dprintscape.com/guides/bambu-lab-x2d
▸ Bambu Studio color mixing guide: 3dprintscape.com/bambu-studio-color-mixing-guide
▸ Full X2D video series: youtube.com/playlist?list=PL_m164ESXupzAA5uYQuWZFj3nyCdNVczi

━━━━━━━━━━━━━━━━━━━━━━
🖨️ MY GEAR & RECOMMENDED PRODUCTS
━━━━━━━━━━━━━━━━━━━━━━
▸ All Creality printers: crealityofficialstore.sjv.io/c/5142166/2096381/25652
▸ Ender 3 V2: crealityofficialstore.sjv.io/c/5142166/3870217/25652
▸ SparkX i7: crealityofficialstore.sjv.io/c/5142166/3791607/25652
▸ Anycubic Kobra 4: us.anycubic3d.com/products/kobra-4-combo-3d-printer?_sasdk=dMTlmYTM3YWIwYmExNjdhLTBkMWVkNTE2Njc4NjEzLTRjNjU3YjU4LTQ5MTYxNjAtMTlmYTM3YWIwYmIyNjA2&ref=3dprintscape&utm_source=goaffpro
▸ BIQU equipment: tidd.ly/43n6dfu
▸ BIQU filament: tidd.ly/4ukNtsZ
▸ Filament on Amazon: geni.us/BJx0Gdj

━━━━━━━━━━━━━━━━━━━━━━
⏱️ CHAPTERS
━━━━━━━━━━━━━━━━━━━━━━
0:00 – Introduction
1:07 – Opening the box
2:06 – Removing packaging & tape
3:40 – Tool & accessory kit contents
4:14 – Removing shipping screws & foam
6:33 – Accessory box walkthrough
7:59 – Installing the touchscreen
8:20 – Back panel & auxiliary extruder setup
10:14 – AMS setup & tube connections
13:54 – Powering on & initial software setup
15:41 – Calibration process
16:19 – Loading filament into the AMS
17:56 – First test print from the printer
19:43 – Installing Bambu Studio
22:33 – Slicing & printing from Bambu Studio
26:16 – Initial thoughts & verdict

━━━━━━━━━━━━━━━━━━━━━━
🔔 SUBSCRIBE
━━━━━━━━━━━━━━━━━━━━━━
Practical 3D printing guides, reviews, and projects:
youtube.com/channel/UCUakh0dyF_l3b-W3x2DZplQ

━━━━━━━━━━━━━━━━━━━━━━
💬 CONNECT
━━━━━━━━━━━━━━━━━━━━━━
▸ Discord: discord.gg/Bu94EYVkrU
▸ Patreon: patreon.com/3dprintscape
▸ Website: 3dprintscape.com

━━━━━━━━━━━━━━━━━━━━━━
🏷️ TAGS
━━━━━━━━━━━━━━━━━━━━━━
#BambuLab #X2D #3DPrinting #AMS #BambuStudio #3DPrinterSetup
Bambu Lab X2D Unboxing: First Look at Bambus NEWEST 3D PrinterThis 3D printed frame changes everything!Tripo AI Printability Test: The Results Might Surprise YouOstation 2 Pro: The Ultimate Battery Sorter & Charger ExplainedStop Wasting Filament on Bad Orca Supports10 Printer Accessories I Cant Live WithoutSKR Mini e3 v3 Firmware Update: What You Need to KnowUpgrading to Cura 5.4? Heres Whats DifferentOctoScreen Setup – Monitor Your 3D Printer RemotelyFASTEST “Zero Waste” Multi-Color 3D Printer | SparkX i8  Vs Snapmaker u1This Is Why Laser Engraving Is So Satisfying #xtoolSKR Mini BLTouch Installation – Firmware to First Print
3D Printscape |

Bambu Lab X2D Unboxing: First Look at Bambu's NEWEST 3D Printer

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER