Uploaded April 2022 | Updated November 2026, 3 hours ago
Proof of concept automated diamond cut knurling with ELS. There is much room for improvement, it's really hard to do this at RPMs greater than 250 due to the acceleration required for the pitch to achieve the appropriate helix angle. Might be better suited to hand cranked spindle and slower cuts.
Proof of concept automated diamond cut knurling with ELS. There is much room for improvement, it's really hard to do this at RPMs greater than 250 due to the acceleration required for the pitch to achieve the appropriate helix angle. Might be better suited to hand cranked spindle and slower cuts.










