Autodesk Fusion Laser Cutting Toolpath + DXF Export Tutorial @WhatMakeArt
Autodesk Fusion Laser Cutting Toolpath + DXF Export Tutorial  @WhatMakeArt
Uploaded September 2026 | Updated November 2026, 14 hours ago
Learn how to create a laser cutting toolpath in Autodesk Fusion and export a DXF file that is ready for your laser cutter.

In this tutorial, I walk through the complete Fusion laser cutting workflow using the Manufacture workspace and Fabrication tools. You'll learn how to create a setup, select your parts, configure a laser cutter tool with the correct kerf width, create separate interior and exterior 2D Profile operations, simulate the cutting order, and post-process the finished toolpath as a DXF.

A key part of the workflow is cutting interior holes and pockets before the outside profiles. Once an outside profile is cut, the part can shift on the laser bed, which can cause later cuts to become inaccurate. Separating these operations also makes it easier to control the cutting order when you bring the DXF into your laser cutter software.

I also show useful Autodesk DXF post-processor settings, including outputting polylines, creating 2D-only cutting geometry, removing unnecessary movement lines, and placing different cutting operations on separate layers.

Topics covered:

- Set up laser cutting in the Autodesk Fusion Manufacture workspace
- Use the Fabrication workspace
- Create a new manufacturing setup
- Select the correct model geometry
- Create laser cutting tools with kerf compensation
- Create 2D Profile toolpaths
- Select inner loops for interior cuts
- Select outer loops for profile cuts
- Cut interior geometry before exterior profiles
- Simulate the laser cutting sequence
- Use the Autodesk DXF post processor
- Export laser cutting toolpaths as DXF
- Output polylines for laser cutters such as Epilog
- Put separate cutting operations on separate DXF layers

Chapters:

00:00 Autodesk Fusion laser cutting workflow
00:24 Open the Manufacture and Fabrication workspace
00:30 Create a new laser cutting setup
00:46 Select the model and stock
00:56 Create laser cutting operations
01:13 Create the interior 2D Profile
01:36 Select inner loops for pocket cuts
02:04 Create the exterior 2D Profile
02:38 Simulate the cutting order
02:56 Export using Post Process
03:09 Select the Autodesk DXF post processor
03:32 Configure DXF export settings
04:02 Name and post the DXF file
04:12 DXF ready for the laser cutter

This workflow is useful for fabrication projects created in Autodesk Fusion that need to be transferred to Epilog or other laser cutting systems while preserving kerf compensation and cutting order.

#AutodeskFusion #Fusion360 #LaserCutting #DXF #DigitalFabrication #LaserCutter #CADCAM

youtube.com/channel/UCmGXH-jy0o2CuhqtpxbaQgA/joi

n
Autodesk Fusion Laser Cutting Toolpath + DXF Export TutorialAdobe Audition: Create a New Audio File, Set Sample Rate, and Save ProperlyAutodesk Fusion Mesh to Sketch: Create Accurate Cross SectionsHow to Change Frame Rate for an Image Sequence in Premiere Pro (Interpret Footage Method)*From Blender to Bambu Studio: Check Non-Manifold STLs and Slice the Right WayHow to Fix Clipping Audio in Adobe Audition | DeClipper TutorialThe Cheat for Perfect Colors in PhotoshopConvert STL to Parametric CAD in Fusion (No Prismatic, Hobby License Workflow)How to Composite 3D Models Into Photos in BlenderFusion Laser Cutting: Export Separate DXF Setups for 3mm and 6mm PartsAutodesk Fusion Laser Cutter Tool Setup: Kerf Width + Tool Library | UpdatedBlender Texture Baking for 3D Scans: High Poly to Low Poly Shirt Workflow
What Make Art |

Autodesk Fusion Laser Cutting Toolpath + DXF Export Tutorial

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER