Uploaded February 2026 | Updated November 2026, 4 days ago
In this Autodesk Fusion tutorial, you’ll learn how to create multiple setups in the Manufacturing workspace for laser cutting when your design includes parts with different material thicknesses (like 3mm and 6mm). You’ll set up 2D Profile operations, choose the correct cutting order (inside cuts first), and export clean AutoCAD DXF files where operations can be separated into layers for easier control in your laser software.
This workflow is especially useful if you want good habits that transfer directly to CNC machining, where Z height and stock setup matter much more than typical 2D laser jobs.
youtu.be/-B6DXF9aE5s
youtu.be/CBu6vl6Bqos
Chapters
00:00 Why you need multiple setups for different thickness parts
00:22 Manufacturing workspace overview and setup approach
00:45 Create a new Fabrication setup for laser cutting
01:00 Setup for 3mm parts and choose 2D Profile
01:17 Select geometry and set inside loops to start on the inside
01:49 Add outside contours with a second 2D Profile
02:05 Export operations as layers for better cut order control (Epilog, LightBurn)
02:17 Create the 6mm setup and select the correct parts
02:42 Post-process to AutoCAD DXF + best export settings (polylines, 2D, layers)
03:19 Export both setups and why this matters for CNC workflows
03:49 Wrap up
Key steps covered
- Make separate setups for 3mm and 6mm components in Manufacture - Fabrication
- Use 2D Profile operations and organize cuts so inside features run before outside profiles
- Post-process to AutoCAD DXF with:
- Output polylines enabled
- Include drill unchecked
- Output to 2D enabled
- Cutting operations on separate layers enabled
youtube.com/channel/UCmGXH-jy0o2CuhqtpxbaQgA/join
In this Autodesk Fusion tutorial, you’ll learn how to create multiple setups in the Manufacturing workspace for laser cutting when your design includes parts with different material thicknesses (like 3mm and 6mm). You’ll set up 2D Profile operations, choose the correct cutting order (inside cuts first), and export clean AutoCAD DXF files where operations can be separated into layers for easier control in your laser software.
This workflow is especially useful if you want good habits that transfer directly to CNC machining, where Z height and stock setup matter much more than typical 2D laser jobs.
youtu.be/-B6DXF9aE5s
youtu.be/CBu6vl6Bqos
Chapters
00:00 Why you need multiple setups for different thickness parts
00:22 Manufacturing workspace overview and setup approach
00:45 Create a new Fabrication setup for laser cutting
01:00 Setup for 3mm parts and choose 2D Profile
01:17 Select geometry and set inside loops to start on the inside
01:49 Add outside contours with a second 2D Profile
02:05 Export operations as layers for better cut order control (Epilog, LightBurn)
02:17 Create the 6mm setup and select the correct parts
02:42 Post-process to AutoCAD DXF + best export settings (polylines, 2D, layers)
03:19 Export both setups and why this matters for CNC workflows
03:49 Wrap up
Key steps covered
- Make separate setups for 3mm and 6mm components in Manufacture - Fabrication
- Use 2D Profile operations and organize cuts so inside features run before outside profiles
- Post-process to AutoCAD DXF with:
- Output polylines enabled
- Include drill unchecked
- Output to 2D enabled
- Cutting operations on separate layers enabled
youtube.com/channel/UCmGXH-jy0o2CuhqtpxbaQgA/join










