Aural Exciter @MrAudioSoundImages
Aural Exciter  @MrAudioSoundImages
Uploaded March 2016 | Updated November 2026, 13 hours ago
With digital recordings the signal remains in tact, as originally recorded, throughout the entire record and mix process, unless altered by digital signal processing. However, that's not the case with analog recordings.
With analog tape the high-frequency signals are recorded closer to the surface, while the lower-frequency signals penetrate deeper into the oxide layer. After the tape has passed over the heads multiple times during the overdubbing and mixing, a portion of the high-frequency information can literally be abraded off of the tape.
In the 1970s Aphex Systems (now Aphex LLC) developed a signal processor that could restore much of this lost high-frequency information. They called this processor the "Aural Exciter", since it enhanced the clarity and intelligibility by synthesizing some of the lost higher harmonics.
It used dynamic equalization, meaning that more harmonics were added when the signal was at a lower volume level and less were added when the signal was louder.
In addition to the high-end, the exciter also processed the lower frequencies by using a low-pass filter and a dynamic compressor to limit the low-frequency range. By compressing the bass, the signal was also perceived as being louder, even though the peak levels didn't actually increase.
Aphex was very secretive about the technology , since other manufacturers were very eager to copy it.
Initially the Aphex Aural Exciter units were not available for purchase. Instead, users paid a license fee, typically $30 per minute of song length.
Aural ExciterNon destructive editingAutomated Mixing.m4vThe OcarinaDogme 95AuratonesTransposing Instruments (3rd rev)Monophonic and PolyphonicConvolution ReverbFLRB ArrayPresenceV-Discs
MrAudioSoundImages |

Aural Exciter

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER