Uploaded October 2013 | Updated November 2026, 5 hours ago
Automated mixing actually began way back in 1939 with Bill Garity and John Hawkins, as they developed the Fanatasound system for Disney's "Fantasia". However, it would be decades before automation was available on mixing consoles.
Consoles with VCA (voltage controlled amplifier) faders allowed the mix engineers to set levels and refine the mix with every pass. Engineers could "lock in" the volume levels on many of the tracks, freeing them to focus on the nuances of one or more tracks, and create a mix with more precision than ever before.
Unfortunately on most early automated consoles, the automation was limited only to volume and mute. The mix engineer, therefore, needed to make detailed notes indicating how everything else (both on board and outboard) was configured, in case the session needed to be redone in the future.
As console automation improved, data was recorded for most of the console functions, although many of these systems still required some manual reset, and many of these consoles could not dynamically change these settings during the mix.
With digital audio workstations almost all mixing parameters can be dynamically automated. Once the automation is written, the session can be opened in the future with all the proper settings, as easily as opening a Word document.
Automated mixing actually began way back in 1939 with Bill Garity and John Hawkins, as they developed the Fanatasound system for Disney's "Fantasia". However, it would be decades before automation was available on mixing consoles.
Consoles with VCA (voltage controlled amplifier) faders allowed the mix engineers to set levels and refine the mix with every pass. Engineers could "lock in" the volume levels on many of the tracks, freeing them to focus on the nuances of one or more tracks, and create a mix with more precision than ever before.
Unfortunately on most early automated consoles, the automation was limited only to volume and mute. The mix engineer, therefore, needed to make detailed notes indicating how everything else (both on board and outboard) was configured, in case the session needed to be redone in the future.
As console automation improved, data was recorded for most of the console functions, although many of these systems still required some manual reset, and many of these consoles could not dynamically change these settings during the mix.
With digital audio workstations almost all mixing parameters can be dynamically automated. Once the automation is written, the session can be opened in the future with all the proper settings, as easily as opening a Word document.










