Artilume T1 7W Review: Unboxing, Setup & Wood and Coated Metal Tests @BCHTechnologies
Artilume T1 7W Review: Unboxing, Setup & Wood and Coated Metal Tests  @BCHTechnologies
Uploaded October 2026 | Updated November 2026, 3 days ago
I tested the Artilume T1 7W folding laser engraver from unboxing through setup and two finished projects. Watch the wood engraving and the detailed mark on coated metal, then see the results up close. I also share how the compact working area fits into a real workshop.

Artilume provided the T1 at no cost for this review. The affiliate link below may earn me a commission if you purchase through it. My opinions and the test results shown are my own.

Artilume T1 product page: artilumelab.com/products/artilume-t1-foldable-laser-engraver My viewer have a special coupon: BCH
Amazon Link: amazon.com/Artilume-U1-Laser-Engraver-Machine/dp/B0G3NZMWXG
My Artilume affiliate link: artilumelab.com/?ref=KEVINDAY

Always use appropriate laser eye protection, ventilation, and materials you can identify. Stay with the machine while it runs.
Chapters:
00:00 Introduction
01:04 Unboxing the Artilume T1 7W
01:40 Unfolding and setting up the machine
02:15 Connecting the software
03:37 Preparing the wood design
04:33 Engraving the wood piece
05:08 Wood engraving result
05:44 Preparing the coated aluminum tag
06:54 Engraving the metal tag
07:26 Speed, learning curve, and test limits
09:23 Coated metal result
09:49 Who is the T1 for?

What would you make with a compact laser engraver? Let me know in the comments.

#Artilume #LaserEngraving #LaserEngraver
Artilume T1 7W Review: Unboxing, Setup & Wood and Coated Metal TestsOne Wrong Screw Caused This Printer to Catch Fire #printerrepair #techfail #518Why Your Printer Smudges & How to Fix It Like a ProThis Simple Trick Fixes Your Scanner Every Time!That Screeching ET-8550 & Error 034004? We Disassembled It to Show You WhyDont Let Your DTF Printer Do This #442Pull This Cable Wrong, Pay $200 #printerfail #diy #505Why Your Printer is Acting Like a Blind OlympianHow to replace a printer feed gear in under 60 seconds #diy #printer #shorts #5387 Things to Check If Your Printer Prints Blank PagesHow to Prevent DTF Printer Clogs When Not in UseEpson L1800 QF1 Transistor Repair: Why This One Part Stops Your Printer Cold
Kevin at BCH |

Artilume T1 7W Review: Unboxing, Setup & Wood and Coated Metal Tests

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER