Uploaded November 2015 | Updated September 2026, 2 weeks ago
Welcome, this is another video with More Gadget Tech Thoughts.
This is an update to the video I did a few months back when I decided to change the filtering on the Aoyue 8800 de-soldering gun.
In this video I show how effective the new filtering system is, and its much easier to clean and change.
If you missed the first video you can watch it:
youtu.be/oRUlTedCMYM
I did another follow up video for part 3 also:
youtu.be/vj2sZ8zW3PY
The ceramic tape I used was original purchased for wrapping 3D Printer Hot Ends, but worked great for this also. This link will take you to the part, you may be able to find it with the same specs in a smaller roll. The dimensions are 1/16" inch Thick by 1" inch wide.
This is for the 50 foot roll, they sell it also in a 25 foot roll but it was cheaper for the 50 ft roll. Then choose product number 87575K84
The main properties that are important are, you might be able to get away with 800° F (426° C) to 1000 ° F (537 ° C), the ceramic tape I have is rated for -50° to 2300° F (1,260 ° C)
I bought the roll from McMaster-Carr Supply Company
https:\\McMaster.com
mcmaster.com/catalog/126/3770
You can find it by searching for the following:
Item Number:
87575K84
Name:
Ultra-High-Temperature Ceramic Fiber Insulation, Alumina Oxide, 50 Feet Long x 1" Wide x 1/16" Thick
Welcome, this is another video with More Gadget Tech Thoughts.
This is an update to the video I did a few months back when I decided to change the filtering on the Aoyue 8800 de-soldering gun.
In this video I show how effective the new filtering system is, and its much easier to clean and change.
If you missed the first video you can watch it:
youtu.be/oRUlTedCMYM
I did another follow up video for part 3 also:
youtu.be/vj2sZ8zW3PY
The ceramic tape I used was original purchased for wrapping 3D Printer Hot Ends, but worked great for this also. This link will take you to the part, you may be able to find it with the same specs in a smaller roll. The dimensions are 1/16" inch Thick by 1" inch wide.
This is for the 50 foot roll, they sell it also in a 25 foot roll but it was cheaper for the 50 ft roll. Then choose product number 87575K84
The main properties that are important are, you might be able to get away with 800° F (426° C) to 1000 ° F (537 ° C), the ceramic tape I have is rated for -50° to 2300° F (1,260 ° C)
I bought the roll from McMaster-Carr Supply Company
https:\\McMaster.com
mcmaster.com/catalog/126/3770
You can find it by searching for the following:
Item Number:
87575K84
Name:
Ultra-High-Temperature Ceramic Fiber Insulation, Alumina Oxide, 50 Feet Long x 1" Wide x 1/16" Thick
