Uploaded April 2022 | Updated November 2026, 20 hours ago
The folks at Anycubic sent over the new "Kobra Max" 3D printer. With a 400mm x 400mm x 450mm Build Volume this will be my BIGGEST 3D Printer to date. Let's unbox the printer and test print with it to see what we can do! We will discuss the uses I have in mind for the Anycubic Kobra Max in the near future.
Want to download FREE design files for the prints in this video? Check out my Thangs 3D Profile: thangs.com/MandicReally
------------------------------------------------------------------------------------------------
Products Feautred (Affiliate Links):
Check out the Anycubic Kobra Max: tinyurl.com/KobraMax
Polymaker Filament: tinyurl.com/Polymakerr
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/2U4b1nZ
*** Video Recorder Used: amzn.to/30cAvU9
*** Action Camera: amzn.to/2ATHS73
*** Second Camera: amzn.to/371EhBM
*** B-Roll Lens: amzn.to/2xmg85L
*** Wide Angle Lens: amzn.to/2YiZTmH
*** Slider: amzn.to/3nGZ1Uh
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2IjTJiB
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** RGB Lights: amzn.to/2UUGAOk
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
#MandicReally #3DPrinting #3DPrinter
The folks at Anycubic sent over the new "Kobra Max" 3D printer. With a 400mm x 400mm x 450mm Build Volume this will be my BIGGEST 3D Printer to date. Let's unbox the printer and test print with it to see what we can do! We will discuss the uses I have in mind for the Anycubic Kobra Max in the near future.
Want to download FREE design files for the prints in this video? Check out my Thangs 3D Profile: thangs.com/MandicReally
------------------------------------------------------------------------------------------------
Products Feautred (Affiliate Links):
Check out the Anycubic Kobra Max: tinyurl.com/KobraMax
Polymaker Filament: tinyurl.com/Polymakerr
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/2U4b1nZ
*** Video Recorder Used: amzn.to/30cAvU9
*** Action Camera: amzn.to/2ATHS73
*** Second Camera: amzn.to/371EhBM
*** B-Roll Lens: amzn.to/2xmg85L
*** Wide Angle Lens: amzn.to/2YiZTmH
*** Slider: amzn.to/3nGZ1Uh
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2IjTJiB
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** RGB Lights: amzn.to/2UUGAOk
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
#MandicReally #3DPrinting #3DPrinter










