Uploaded July 2020 | Updated November 2026, 1 hour ago
In this restoration I tackle the largest project I have done to date! This is a 1920s drag or log saw made by the Ottawa Mfg. Co. of Ottawa, Kansas, USA. This is a TE model with a 5HP 4-stroke engine on it. The saw mimics the sawing action of two people using a non-powered crosscut saw. The saw blade itself is 5ft long.
I have not dealt with 4-stroke engines very often in my restoration history, so it was a lot of fun learning along the way.
The tool itself shows signs of many repairs over its ~100 years, including a lot of brazing due to large frost cracks and completely broken castings in other places. The wooden base is rotting away and is cracked in many places as well. The magneto does not produce spark and the piston is stuck as well!
In this video I tackle the disassembly as well as make new parts or repair parts when I can.
In the final video I will paint parts, reassemble, and test it out on a log!
I would like to thank Evapo-Rust for sponsoring this video.
Wrenches are now for sale at handtoolrescue.com
Help secure more tools for future videos (if you want):
patreon.com/handtoolrescue
Instagram:
instagram.com/handtoolrescue
Facebook Group - Share your restorations
facebook.com/groups/handtoolrescue
facebook.com/handtoolrescue
Reddit - Share your restorations
reddit.com/r/HandToolRescue
Podcast (with Jimmy DiResta and Andrew Alexander) - https://anchor.fm/fitzall
In this restoration I tackle the largest project I have done to date! This is a 1920s drag or log saw made by the Ottawa Mfg. Co. of Ottawa, Kansas, USA. This is a TE model with a 5HP 4-stroke engine on it. The saw mimics the sawing action of two people using a non-powered crosscut saw. The saw blade itself is 5ft long.
I have not dealt with 4-stroke engines very often in my restoration history, so it was a lot of fun learning along the way.
The tool itself shows signs of many repairs over its ~100 years, including a lot of brazing due to large frost cracks and completely broken castings in other places. The wooden base is rotting away and is cracked in many places as well. The magneto does not produce spark and the piston is stuck as well!
In this video I tackle the disassembly as well as make new parts or repair parts when I can.
In the final video I will paint parts, reassemble, and test it out on a log!
I would like to thank Evapo-Rust for sponsoring this video.
Wrenches are now for sale at handtoolrescue.com
Help secure more tools for future videos (if you want):
patreon.com/handtoolrescue
Instagram:
instagram.com/handtoolrescue
Facebook Group - Share your restorations
facebook.com/groups/handtoolrescue
facebook.com/handtoolrescue
Reddit - Share your restorations
reddit.com/r/HandToolRescue
Podcast (with Jimmy DiResta and Andrew Alexander) - https://anchor.fm/fitzall
![Die Filer [Restoration]
This restoration is on a Harvey Manufacturing Corp. Butterfly filing machine from the 1950s-1960s. Also known as a die filer, or its proper pronunciation defiler, this tool perfectly and quickly moves a file up and down to rapidly remove material. The one I have also has a scroll saw attachment.
I actually used this tool in a previous video, but it kept seizing on me every time I would shut it off and would need a giant wrench to get it moving again. The annoying seizing became too much for me so I decided to restore this machine and fix the problem.
Most parts were in decent condition, but the paint had deteriorated heavily over time.
Due to the numerous brass tags on this tool, I decided to show a few different methods of restoring them. The original filer attachment was missing, but was kindly donated by a sensual viewer.
I would love to find the original files for this machine, but Ill settle for modern replacements that all cut on the downstroke instead of the upstroke, like most files today.
I will definitely be using this machine in the future for a number of projects I have in mind.
Wrenches, screwdrivers, and socket drivers are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue
Facebook Group - Share your restorations
https://www.facebook.com/groups/handtoolrescue
https://www.facebook.com/handtoolrescue/
Reddit - Share your restorations
https://www.reddit.com/r/HandToolRescue/
Podcast (with @jimmydiresta and Andrew Alexander) - https://anchor.fm/fitzall Die Filer [Restoration]](https://i.ytimg.com/vi/Si2a3Bs9QBc/mqdefault.jpg)



![1860s Starrett Food Chopper [Restoration]
The restoration is on the oldest tool I have worked on so far for YouTube. This is a food chopper or hasher patented by L.S. Starrett (of Starrett tool fame) in 1865. It was one of his first patented inventions. You can see the patent here: https://patents.google.com/patent/US47875
At the time of production, this was used mainly to dice meat in to smaller pieces at a much faster pace than doing it by hand. The rich or businesses would find this affordable as it sold for $10 USD in 1869, which is equivalent to ~$2000USD in 2020.
I found this tool about two years ago and wanted it for my personal collection. Since this piece was not a commission, I was able to do whatever I liked with it during the restoration process. With that in mind, I purposely did not remake any wooden pieces as they had a very attractive pattern on them from years of use. With that decision made, it would look odd to remake the damaged bucket as well, so that was just repaired and left as found.
The parts were dunked in Evapo-Rust to reveal what colour and where the original paint was. The only painted part seemed to be the bucket base. The bucket and its base both showed some bright blue paint on the hidden seem where they meet. I am not sure why this colour was there or if it even was paint.
The main castings were all cleaned and had their bores enlarged to accept bronze bushings. There was just too much play all over the machine to make sure it functioned properly, so it had to be done.
The restoration decisions on this tool were very hard to make as I wanted to respect the age and inventor while also maintaining a specific look. Hopefully I achieved a nice balance of those two.
There were MANY different variations of this tool in images online probably due to many production changes over time as the production shifted from Starrett himself to the Athol Machine Co. over time. If someone ever makes a type study for this tool, I will be greatly appreciative.
I would like to thank Evapo-Rust for sponsoring this video.
Wrenches are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue
Facebook Group - Share your restorations
https://www.facebook.com/groups/handtoolrescue
https://www.facebook.com/handtoolrescue/
Reddit - Share your restorations
https://www.reddit.com/r/HandToolRescue/ 1860s Starrett Food Chopper [Restoration]](https://i.ytimg.com/vi/Tgi-ON9HxlU/mqdefault.jpg)
![Two-Man Chainsaw [Restoration] - Motor Inspection
The time has come for this chainsaw restoration. This specific saw restoration is for me and I have been wanting to get to this tool for a long time. I started the disassembly in November 2018 and had to wait a while for some rare parts to arrive. This chainsaw is a McCulloch 99 two-man chainsaw made in 1954. The engine is 161cc and the powerhead alone is 51lbs making it one of the largest production chainsaws ever and the largest in McCullochs production line at the time.
In this video, I focus on disassembling the powerhead and getting everything ready for painting. I used 2 coats of self-etching primer, 3 coats of yellow enamel, and 3 coats of 2K fuel-resistant clear paint for each of the painted pieces.
I was not able to get the clutch off of this saw, so instead of fixing something until I break it, I decided to leave it alone and restore the chainsaw without removing the clutch. This meant that the crankshaft had to stay together as well. Almost all pieces were meticulously cleaned by hand as solvents and degreasers can only do so much.
In the next video, I will piece the whole saw together and hopefully and finally cut some wood.
Wrenches are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue
Facebook Group - Share your restorations
https://www.facebook.com/groups/handtoolrescue
Reddit - Share your restorations
https://www.reddit.com/r/HandToolRescue/ Two-Man Chainsaw [Restoration] - Motor Inspection](https://i.ytimg.com/vi/ThAJp-5pklM/mqdefault.jpg)
![1940s Spark Plug Cleaner [Restoration]
This spark plug cleaner restoration took much longer that I thought it would.
This tool is a 1944-45 Auto-lite or Autolite Spark Plug Cleaning Service machine. I bought this locally in Saskatoon, SK, Canada and thought it would be fun to restore. The tool is essentially a localized sandblaster for the tips of spark plugs.
I went with several coats of filler primer in hopes of covering all the pitting and denting, but I feel like bondo may have been a better choice. I was not able to get the pressure gauge open to have a look and see if anything was damaged or broken. In the end, the machine worked great, but the gauge did not show that enough pressure for optimal functioning was there. I do not know if this was a gauge issue or a leak somewhere else.
I have not been able to find any documentation or manuals for this tool so operating it was just based on how I think it should work.
I can see myself actually using this when I come across more gas-powered tools.
If you ever come across the different sizes of spark plug holders for this, please email me at handtoolrescue@gmail.com
All graphics were provided by FORMA Graphics. You can contact them at formagraphicart@gmail.com. He has a passion for old tools and will help you make the decal/sticker that you need.
Id like to thank Evapo-Rust for sponsoring this video.
Music: http://www.bensound.com/royalty-free-music
Help secure more tools for future videos (if you want):
https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue
Facebook Group - Share your restorations
https://www.facebook.com/groups/handtoolrescue
Reddit - Share your restorations
https://www.reddit.com/r/HandToolRescue/ 1940s Spark Plug Cleaner [Restoration]](https://i.ytimg.com/vi/U70BWviOXEQ/mqdefault.jpg)

![1930s Rotary Jigsaw (Cutawl) [Restoration]
This rotary jigsaw was also known as the Cutawl (Model K8). Based on the age of the motor and the history of patents on this machine, I believe it was made sometime in the 1930s. It had many other cutters available for cutting materials such as metal, wood, leather, fabric, drywall, and essentially anything else that is up to 1.25 thick and softer than hardened steel.
This restoration was a lengthly process as the motor needed work as well. I am stunned this motor eventually ran so well. There is zero play in any direction other than back and forth when I move the armature. For a motor that is ~85 years old, I was very surprised to see the bronze bushings having essentially no wear. Its possible they were replaced at one point.
After doing research on this tool and talking with some collectors and experts, I learned that there were certain parts that were fragile and prone to damage. The large wheel in the back is attached to the main shaft by a pin that does not go through the centre of the shaft, but is offset. This means that over time, the offset pin allowed the wheel to wear around the shaft and starting wobbling itself to the point of bending/breaking the shaft. I chose not to risk it and left the wheel as is.
While looking at a parts diagram of this tool, I decided it was too risky to try and hammer and pry off the rotary mechanism as its filled with small steel balls and retainer rings. These two things are my enemies. All I do is loose them. The part works completely fine, so there is no reason to mess with it.
I could actually see myself using this tool for some applications. It has a very natural feel to controlling the direction of cut and I feel like I could be more accurate with this than a modern jigsaw.
Hopefully you get a chance to try one of these out one day!
Here is a link to all the materials the tool can cut: http://imgur.com/a/RDysJ
Thank you to Evapo-rust for sponsoring this video!
Help secure more tools for future videos (if you want): https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue/ 1930s Rotary Jigsaw (Cutawl) [Restoration]](https://i.ytimg.com/vi/Ug2IbkusiUk/mqdefault.jpg)

![Antique Centrifugal Dental Casting Machine [Restoration]
This restoration is on a 1930s dental casting machine made by the Torit Manufacturing Co. of St. Paul, Minnesota, USA. I was unable to find a photo of this model with the exact same base design, but similar designs exist. This machine would most likely be used for casting gold teeth and fillings.
The base was extremely rusty, but all other parts are made of aluminum or brass, so they held together much better over the years. I decided to use babbitt as a casting metal since it melts at such a low temperature and isnt very expensive. This was my first time casting any metal on my own and learning the process was a lot of fun.
Its nice to see this tool back in service and spinning molten metal very close to your face at high speed.
Wrenches, screwdrivers, and socket drivers are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue
Facebook Group - Share your restorations
https://www.facebook.com/groups/handtoolrescue
https://www.facebook.com/handtoolrescue/
Reddit - Share your restorations
https://www.reddit.com/r/HandToolRescue/
Podcast (with @jimmydiresta and Andrew Alexander) - https://anchor.fm/fitzall Antique Centrifugal Dental Casting Machine [Restoration]](https://i.ytimg.com/vi/VbdYQs3yfXM/mqdefault.jpg)