Uploaded March 2025 | Updated November 2026, 1 day ago
Antenna Design playlist. Watch these video to understand more on Antenna Design.
youtube.com/watch?v=RTtCxtSaG8w&list=PLFxhgwM1F4ywAyke2KC22BLBl1V4vV9Jt
For access to this presentation materials, membership is required: I need the Material PPT
Sent me an email to Technologies.Discussion@gmail.com
If you need the whole playlist material, send me email and we discuss.
Give me some time to response. Thanks.
Antenna Radiation Mechanism for 1) Single Wire, 2) Two-Wires & 3) Dipole Antenna.
Antenna Part 17. Antennas Radiation Mechanism for Single Wire, 2-Wires & Dipole "Release" EM Wave.
Antenna #17. How Single Wire, 2-Wires & Dipole Antenna Radiate Thru Oscillation of Electric Current.
One of the first questions that may be asked concerning antennas is, “How is radiation accomplished?” In other words, how are the electromagnetic fields generated by the source contained and guided within the transmission line and antenna, and finally “detached” from the antenna to form a free-space wave? The best explanation can be provided through an illustration. However, let us first examine some basic sources of radiation from:
Single Wire
Two-Wires
Dipole
The receiving half-wave dipole antenna consists of two metal rods connected to a receiver (R). The electric field (green arrows) of the incoming wave pushes the electrons on the rods back and forth, causing the ends become alternately positively charged (+) and negatively charged (−). Since the length of the antenna is half the wavelength of the wave, the oscillating electric field induces standing waves of voltage (red) and current in the rods. The oscillating currents (black arrows) flow through the transmission line and into the receiver (resistance R).
A single-wire antenna radiates EM waves through the oscillation of electric currents along its length. Here's a simplified explanation of the process:
1. Current Oscillation: When an alternating current (AC) signal is applied to the single-wire antenna, it causes electrons to oscillate back and forth along the wire. This oscillation generates a time-varying electric field around the wire.
2. Magnetic Field Generation: The oscillating electric current also produces a time-varying magnetic field around the wire, as described by Ampère's Law (with Maxwell's addition). The magnetic field is perpendicular to the direction of the current flow.
3. Electromagnetic Wave Formation: The time-varying electric and magnetic fields are coupled and propagate away from the antenna as an electromagnetic wave. This is described by Maxwell's equations, which show that a changing electric field induces a magnetic field, and a changing magnetic field induces an electric field.
4. Radiation Pattern: The radiation pattern of a single-wire antenna depends on its length relative to the wavelength of the signal. If the wire is a half-wavelength long (a common design for dipole antennas), it will radiate efficiently in a pattern that is roughly omnidirectional in the plane perpendicular to the wire.
If a charge is not moving, current is not created, there is no radiation
If charge is moving with a uniform velocity:
There is no radiation if the wire is straight and infinite in extent.
There is radiation if the wire is curved, bent, discontinuous, terminated, or truncated.
If charge is oscillating in a time-motion, it radiates even if the wire is straight.
5. Impedance Matching: For efficient radiation, the antenna's impedance should be matched to the transmission line feeding it. This ensures maximum power transfer from the transmitter to the antenna.
6. Polarization: The polarization of the radiated wave is determined by the orientation of the wire. For a horizontal wire, the electric field is primarily horizontal, resulting in horizontally polarized waves.
A qualitative understanding of the radiation mechanism may be obtained by considering a pulse source attached to an open-ended conducting wire, which may be connected to the ground through a discrete load at its open end. When the wire is initially energized, the charges (free electrons) in the wire are set in motion by the electrical lines of force created by the source. When charges are accelerated at the source-end of the wire and decelerated (negative acceleration with respect to the original motion) during reflection from its end, it is suggested that radiated fields are produced at each end and along the remaining part of the wire.
Stronger radiation with a broader frequency spectrum occurs if the pulses are of shorter or more compact duration, while continuous time-harmonic oscillating charge ideally produces radiation of a single frequency determined by the frequency of oscillation.
Antenna Design playlist. Watch these video to understand more on Antenna Design.
youtube.com/watch?v=RTtCxtSaG8w&list=PLFxhgwM1F4ywAyke2KC22BLBl1V4vV9Jt
For access to this presentation materials, membership is required: I need the Material PPT
Sent me an email to Technologies.Discussion@gmail.com
If you need the whole playlist material, send me email and we discuss.
Give me some time to response. Thanks.
Antenna Radiation Mechanism for 1) Single Wire, 2) Two-Wires & 3) Dipole Antenna.
Antenna Part 17. Antennas Radiation Mechanism for Single Wire, 2-Wires & Dipole "Release" EM Wave.
Antenna #17. How Single Wire, 2-Wires & Dipole Antenna Radiate Thru Oscillation of Electric Current.
One of the first questions that may be asked concerning antennas is, “How is radiation accomplished?” In other words, how are the electromagnetic fields generated by the source contained and guided within the transmission line and antenna, and finally “detached” from the antenna to form a free-space wave? The best explanation can be provided through an illustration. However, let us first examine some basic sources of radiation from:
Single Wire
Two-Wires
Dipole
The receiving half-wave dipole antenna consists of two metal rods connected to a receiver (R). The electric field (green arrows) of the incoming wave pushes the electrons on the rods back and forth, causing the ends become alternately positively charged (+) and negatively charged (−). Since the length of the antenna is half the wavelength of the wave, the oscillating electric field induces standing waves of voltage (red) and current in the rods. The oscillating currents (black arrows) flow through the transmission line and into the receiver (resistance R).
A single-wire antenna radiates EM waves through the oscillation of electric currents along its length. Here's a simplified explanation of the process:
1. Current Oscillation: When an alternating current (AC) signal is applied to the single-wire antenna, it causes electrons to oscillate back and forth along the wire. This oscillation generates a time-varying electric field around the wire.
2. Magnetic Field Generation: The oscillating electric current also produces a time-varying magnetic field around the wire, as described by Ampère's Law (with Maxwell's addition). The magnetic field is perpendicular to the direction of the current flow.
3. Electromagnetic Wave Formation: The time-varying electric and magnetic fields are coupled and propagate away from the antenna as an electromagnetic wave. This is described by Maxwell's equations, which show that a changing electric field induces a magnetic field, and a changing magnetic field induces an electric field.
4. Radiation Pattern: The radiation pattern of a single-wire antenna depends on its length relative to the wavelength of the signal. If the wire is a half-wavelength long (a common design for dipole antennas), it will radiate efficiently in a pattern that is roughly omnidirectional in the plane perpendicular to the wire.
If a charge is not moving, current is not created, there is no radiation
If charge is moving with a uniform velocity:
There is no radiation if the wire is straight and infinite in extent.
There is radiation if the wire is curved, bent, discontinuous, terminated, or truncated.
If charge is oscillating in a time-motion, it radiates even if the wire is straight.
5. Impedance Matching: For efficient radiation, the antenna's impedance should be matched to the transmission line feeding it. This ensures maximum power transfer from the transmitter to the antenna.
6. Polarization: The polarization of the radiated wave is determined by the orientation of the wire. For a horizontal wire, the electric field is primarily horizontal, resulting in horizontally polarized waves.
A qualitative understanding of the radiation mechanism may be obtained by considering a pulse source attached to an open-ended conducting wire, which may be connected to the ground through a discrete load at its open end. When the wire is initially energized, the charges (free electrons) in the wire are set in motion by the electrical lines of force created by the source. When charges are accelerated at the source-end of the wire and decelerated (negative acceleration with respect to the original motion) during reflection from its end, it is suggested that radiated fields are produced at each end and along the remaining part of the wire.
Stronger radiation with a broader frequency spectrum occurs if the pulses are of shorter or more compact duration, while continuous time-harmonic oscillating charge ideally produces radiation of a single frequency determined by the frequency of oscillation.

![Amplifier #14. How to Use Rolletts k-Factor to Stop Amp Oscillation (Step-by-Step Guide & Examples)
Amplifier (Class A, B and C) playlist.
https://www.youtube.com/watch?v=DDGUsBynCyY&list=PLFxhgwM1F4yxq_bvz0iDtL0NTADb-f9-Y
For access to this presentation materials, membership is required: I need the Material PPT
Sent me an email to Technologies.Discussion@gmail.com
If you need the whole playlist material, send me email and we discuss.
Give me some time to response. Thanks.
Amplifier Part 14. Why Your Amp Oscillates & How Rolletts k-Factor Solves It – Practical Guide!
The Rollett Stability Factor, k is a key parameter used in the analysis of the stability of two-port networks, such as amplifiers, especially in radio frequency (RF) and microwave engineering. It is named after John Rollett, who introduced it.
The Rollett Stability Factor k is defined as:
Unconditionally Stable: A network is unconditionally stable if k is larger than 1. This means the network will not oscillate under any passive load or source impedance.
Potentially Unstable: If kis equal or less than 1, the network may become unstable under certain load or source impedance conditions.
Importance:
The Rollett Stability Factor, k is crucial in amplifier design to ensure that the circuit does not oscillate, which could lead to performance degradation or damage.
It is often used alongside other stability measures, such as the Mu (μ) factor, to fully characterize stability.
Practical Use:
Engineers use k to evaluate the stability of transistors / amplifiers during the design process.
If k≤1, additional stabilization techniques (e.g., adding resistors or feedback networks) may be required to ensure stable operation.
In summary, the Rollett Stability Factor k is a fundamental metric for ensuring the stability of RF and microwave circuits.
The μ (mu) factor of stability of an amplifier is a parameter used to assess the stability of an amplifier circuit, particularly in high-frequency applications. The μ factor quantifies the worst-case effect of uncertainties on the stability of a control system. The μ factor helps determine whether an amplifier will oscillate or remain stable under specific operating conditions.
If μ more than 1, the amplifier is unconditionally stable. This means the amplifier will not oscillate under any passive load or source impedance.
If μ is less than 1, the amplifier is potentially unstable. In this case, the amplifier may oscillate under certain load or source impedance conditions.
k is derived from basic stability conditions that the input and output reflected powers must always be less than the incident powers. The ratio of the reflected power to the incident power at the input and output are respectively called the input and output reflection coefficients (IN and OUT ).
If a transistor is potentially unstable (k is less than 1), it is useful to know which areas of the Smith Chart represent the unstable regions. These regions should be avoided when designing matching networks.
To determine the ΓS and ΓL values corresponding to a stable design, the Input Stability Circle in the ΓS plane and the Output Stability Circle in the ΓL plane must be plotted.
Alternatively, if instability persists, you can select a different biasing point for the transistor amplifier. [Remember that different biasing points will yield different S-parameters and, consequently, different stability conditions.] You can then re-evaluate the stability or choose a completely different transistor altogether.
Looking at the block diagram above, maximum power can only be developed across the transistor if and only if
S = IN* i.e conjugately matched at the Input Port.
L = OUT* i.e conjugately matched at the Output Port
Under this condition, the transistor is said to be simultaneous conjugate matched at the Input and Output Port. Under this condition, the maximum gain you can get from this transistor network is called the MAG, maximum available gain.
Transducer Gain
It is the actual gain of an amplifier stage including the effects of input and output matching network and device gain.
Maximum Available Gain (MAG)
The maximum gain you could ever hope to achieve from a transistor under conjugately matched conditions.
Maximum Stable Gain (MSG)
When a transistor is potentially unstable ie k is less than 1, then MSG is defined. It is the maximum gain achievable while remain stable. Amplifier #14. How to Use Rolletts k-Factor to Stop Amp Oscillation (Step-by-Step Guide & Examples)](https://i.ytimg.com/vi/XhYxCt4gxKQ/mqdefault.jpg)








