Uploaded February 2024 | Updated November 2026, 3 days ago
#Benchmarks #AmlogicS912 #CeleronN3060
Full steps can be found at i12bretro.github.io/tutorials/0678.html
--------------------------------------------------------------------
The Devices
--------------------------------------------------------------------
The Armbian device tested runs a 1.5 GHz Octa Core Amlogic S912 64-bit CPU with 2GB DDR3 RAM.
The Intel Celeron N3060 is a 1.6 GHz Dual Core 64-bit CPU paired with 4GB DDR3L SDRAM.
--------------------------------------------------------------------
The Benchmarks
--------------------------------------------------------------------
7-Zip - The 7-zip benchmark tests compression and decompression using the LZMA method. Results are shown as a rating in MIPS (million instructions per second). The rating value is calculated from the measured CPU speed and it is normalized with Intel Core 2 Duo E6600 (2.4 GHz, 4 MB L2) CPU in 64-bit Windows with multi-threading option switched off. The charted value is the total compression MIPS score.
Sysbench - The sysbench CPU benchmark verifies prime numbers by doing standard division of the number by all numbers between 2 and the square root of the number. Once a number gives a remainder of 0, the next number is calculated.
CPU Blowfish - Blowfish is a symmetric-key 64-bit block cipher
CPU CryptoHash - CrytpoHash is a cryptographic hash function that maps data of arbitrary size (often called the "message") to a bit array of a fixed size (called the "hash" or "message digest"). It is a one-way function, that is practically infeasible to invert, and is used in digital signatures, message authentication and hash functions to index data in hash tables.
A Fibonacci sequence is a series of numbers in which each number is the sum of the two preceding numbers, such as 1, 1, 2, 3, 5, 8, etc. This benchmark tests the integer processing ability of a CPU.
CPU Fibonacci - A Fibonacci sequence is a series of numbers in which each number is the sum of the two preceding numbers, such as 1, 1, 2, 3, 5, 8, etc. This benchmark tests the integer processing ability of a CPU.
CPU N-Queens - N-Queens finds a way to place a variable number of queens on a chessboard so that no two queens threaten each other by sharing the same row, column or diagonal. For some reason, the Cortex-A53 which is a simpler in-order processor does better at this benchmark than more complex out-of-order processors like the Cortex-A72 and Core i5, but it is hard to conclude much from this result.
CPU ZLib - ZLib is a software library used for data compression, which is used by the gzip file compression program. This benchmark is memory intensive, so its results will reflect the speed of the RAM.
FPU FFT - Fast Fourier Transforms (FFT) converts a signal to frequencies and vice-versa. It is used in audio digital signal processing and image signal processing, and is an indication how fast a processor can process video in software.
FPU Raytracing - Raytracing is a rendering technique for generating an image by tracing the path of light as pixels in an image plane and simulating the effects of its encounters with virtual objects. Like FFT, this benchmark tests how well the processor deals with floating point numbers (i.e. numbers with decimal points).
Sources: https://source.puri.sm/Librem5/community-wiki/-/wikis/Benchmarks,
unix.stackexchange.com/a/607910
### Connect with me and others ###
★ Discord: discord.com/invite/EzenvmSHW8
★ Reddit: reddit.com/r/i12bretro
★ Twitter: twitter.com/i12bretro
#Benchmarks #AmlogicS912 #CeleronN3060
Full steps can be found at i12bretro.github.io/tutorials/0678.html
--------------------------------------------------------------------
The Devices
--------------------------------------------------------------------
The Armbian device tested runs a 1.5 GHz Octa Core Amlogic S912 64-bit CPU with 2GB DDR3 RAM.
The Intel Celeron N3060 is a 1.6 GHz Dual Core 64-bit CPU paired with 4GB DDR3L SDRAM.
--------------------------------------------------------------------
The Benchmarks
--------------------------------------------------------------------
7-Zip - The 7-zip benchmark tests compression and decompression using the LZMA method. Results are shown as a rating in MIPS (million instructions per second). The rating value is calculated from the measured CPU speed and it is normalized with Intel Core 2 Duo E6600 (2.4 GHz, 4 MB L2) CPU in 64-bit Windows with multi-threading option switched off. The charted value is the total compression MIPS score.
Sysbench - The sysbench CPU benchmark verifies prime numbers by doing standard division of the number by all numbers between 2 and the square root of the number. Once a number gives a remainder of 0, the next number is calculated.
CPU Blowfish - Blowfish is a symmetric-key 64-bit block cipher
CPU CryptoHash - CrytpoHash is a cryptographic hash function that maps data of arbitrary size (often called the "message") to a bit array of a fixed size (called the "hash" or "message digest"). It is a one-way function, that is practically infeasible to invert, and is used in digital signatures, message authentication and hash functions to index data in hash tables.
A Fibonacci sequence is a series of numbers in which each number is the sum of the two preceding numbers, such as 1, 1, 2, 3, 5, 8, etc. This benchmark tests the integer processing ability of a CPU.
CPU Fibonacci - A Fibonacci sequence is a series of numbers in which each number is the sum of the two preceding numbers, such as 1, 1, 2, 3, 5, 8, etc. This benchmark tests the integer processing ability of a CPU.
CPU N-Queens - N-Queens finds a way to place a variable number of queens on a chessboard so that no two queens threaten each other by sharing the same row, column or diagonal. For some reason, the Cortex-A53 which is a simpler in-order processor does better at this benchmark than more complex out-of-order processors like the Cortex-A72 and Core i5, but it is hard to conclude much from this result.
CPU ZLib - ZLib is a software library used for data compression, which is used by the gzip file compression program. This benchmark is memory intensive, so its results will reflect the speed of the RAM.
FPU FFT - Fast Fourier Transforms (FFT) converts a signal to frequencies and vice-versa. It is used in audio digital signal processing and image signal processing, and is an indication how fast a processor can process video in software.
FPU Raytracing - Raytracing is a rendering technique for generating an image by tracing the path of light as pixels in an image plane and simulating the effects of its encounters with virtual objects. Like FFT, this benchmark tests how well the processor deals with floating point numbers (i.e. numbers with decimal points).
Sources: https://source.puri.sm/Librem5/community-wiki/-/wikis/Benchmarks,
unix.stackexchange.com/a/607910
### Connect with me and others ###
★ Discord: discord.com/invite/EzenvmSHW8
★ Reddit: reddit.com/r/i12bretro
★ Twitter: twitter.com/i12bretro






![Run MyBB - Open Source Forum Software - in Docker
#MyBB #Forum #Docker
*** Updated 05/24/2024
Full steps can be found at https://i12bretro.github.io/tutorials/0932.html
What is MyBB?
MyBB is the free and open source forum software powering thousands of engaging, vibrant, and unique communities across the internet. - https://mybb.com/
Installing Docker
01. Log into the Linux host and run the following commands in a terminal window
# install prerequisites
sudo apt install apt-transport-https ca-certificates curl software-properties-common gnupg-agent -y
# add docker gpg key
curl -fsSL https://download.docker.com/linux/$(awk -F= /^ID=/{ print $NF } /etc/os-release)/gpg | sudo apt-key add -
# add docker software repository
sudo add-apt-repository deb [arch=$(dpkg print-architecture)] https://download.docker.com/linux/$(awk -F= /^ID=/{ print $NF } /etc/os-release) $(lsb_release -cs) stable
# install docker
sudo apt install docker-ce docker-compose containerd.io -y
# enable and start docker service
sudo systemctl enable docker && sudo systemctl start docker
# add the current user to the docker group
sudo usermod -aG docker $USER
# reauthenticate for the new group membership to take effect
su - $USER
Running MyBB Container
01. Continue with the following commands in a terminal window
# create working directories
mkdir ~/docker/mybb -p && mkdir ~/docker/postgresql -p && mkdir ~/docker/nginx -p
# set owner of docker directory
sudo chown $USER:$USER ~/docker -R
# allow the container to write to working directories
sudo chmod a+rwx -R ~/docker/mybb
# download the nginx conf file
wget -O ~/docker/nginx/default.conf https://gist.githubusercontent.com/kawaii/ed2fbbf11309b8f635a623fa87abce8d/raw/3a5a6e36b238e55aaef519693ca16c82fbafd2fd/default.conf
# create containers network
docker network create containers
# run the postgesql container
docker run -d name postgres network containers -p 5432:5432 -e POSTGRES_USER=mybb_rw -e POSTGRES_PASSWORD=My44_rw$ -e POSTGRES_DB=mybb -v ~/docker/postgresql:/var/lib/postgresql/data restart=unless-stopped postgres:latest
# run the mybb container
docker run -d name mybb -v ~/docker/mybb:/var/www/html:rw network containers restart=unless-stopped mybb/mybb
# run nginx webserver container
docker run -d name nginx network containers -p 8081:80 -v ~/docker/mybb:/var/www/html:ro -v ~/docker/nginx:/etc/nginx/conf.d:ro restart=unless-stopped nginx
02. Open a web browser and navigate to http://DNSorIP:8081
03. Click Next at the Welcome screen
04. Click Next at the License Agreement
05. Click Next at the Requirements Check
06. Complete the Database Configuration as shown below
Database Engine: PostgreSQL
Database Server Hostname: postgres
Database Username: mybb_rw
Database Password: My44_rw$
Database Name: mybb
Table Prefix: mybb_
07. Click Next after the table creation completes
08. Click Next to complete the Table Population
09. Click Next at the Theme Insertion screen
10. Modify the Board Configuration form as needed ≫ Click Next
11. Create an administrator account by entering a Username, Password and Email Address ≫ Click Next
12. Click the Admin Control Panel link
13. Login with the administrator username and password created earlier
14. Welcome to MyBB
Documentation: https://github.com/mybb/docker
### Connect with me and others ###
★ Discord: https://discord.com/invite/EzenvmSHW8
★ Reddit: https://reddit.com/r/i12bretro
★ Twitter: https://twitter.com/i12bretro Run MyBB - Open Source Forum Software - in Docker](https://i.ytimg.com/vi/cBrApDiqw3o/mqdefault.jpg)


![Run VSCodium Containerized in Docker
#VSCodium #Linux #Docker
Full steps can be found at https://i12bretro.github.io/tutorials/0985.html
What is VSCodium?
VSCodium is a clone of Microsoft’s Visual Studio Code. The project’s sole aim is to provide you with ready to use binaries without Microsoft’s telemetry and tracking code. - https://vscodium.com/
Installing Docker
01. Log into the Linux Docker host and run the following commands in a terminal window
# install prerequisites
sudo apt install apt-transport-https ca-certificates curl software-properties-common gnupg-agent -y
# add docker gpg key
curl -fsSL https://download.docker.com/linux/$(awk -F= /^ID=/{ print $NF } /etc/os-release)/gpg | sudo apt-key add -
# add docker software repository
sudo add-apt-repository deb [arch=$(dpkg print-architecture)] https://download.docker.com/linux/$(awk -F= /^ID=/{ print $NF } /etc/os-release) $(lsb_release -cs) stable
# install docker
sudo apt install docker-ce docker-compose containerd.io -y
# enable and start docker service
sudo systemctl enable docker && sudo systemctl start docker
# add the current user to the docker group
sudo usermod -aG docker $USER
# reauthenticate for the new group membership to take effect
su - $USER
Running VSCodium
01. Continue with the following commands in a terminal window
# list current uid and gid, note these for later
id $user
# create working directories
mkdir ~/docker/vscodium/{config,code} -p
# run the vscodium docker image
# replace PUID, GUID with the output of the id $user command above
docker run -d name=vscodium cap-add=IPC_LOCK -e PUID=1000 -e PGID=1000 -e TZ=America/New_York -p 8003:3000 -v ~/docker/vscodium/config:/config -v ~/docker/vscodium/code:/code shm-size=1gb restart unless-stopped lscr.io/linuxserver/vscodium:latest
02. Open a web browser and navigate to http://localhost:8003
03. Welcome to VSCodium
Source: https://hub.docker.com/r/linuxserver/vscodium
### Connect with me and others ###
★ Discord: https://discord.com/invite/EzenvmSHW8
★ Reddit: https://reddit.com/r/i12bretro
★ Twitter: https://twitter.com/i12bretro Run VSCodium Containerized in Docker](https://i.ytimg.com/vi/dJgh13kYmoI/mqdefault.jpg)
