Install AdGuard Home - Cross Platform Pi Hole Alternative

Uploaded June 2023 | Updated September 2026, 2 weeks ago

#AdGuard #AdBlocker #Armbian

Full steps can be found at i12bretro.github.io/tutorials/0441.html

--------------------------------------------------------------------
What is AdGuard Home?
--------------------------------------------------------------------
AdGuard Home is a network-wide software for blocking ads and tracking. After you set it up, it'll cover ALL your home devices, and you don't need any client-side software for that.
It operates as a DNS server that re-routes tracking domains to a “black hole”, thus preventing your devices from connecting to those servers. It's based on software we use for our public AdGuard DNS servers, and both share a lot of code. - github.com/AdguardTeam/AdguardHome

--------------------------------------------------------------------
Installing AdGuard Home
--------------------------------------------------------------------
   01. Log into the Armbian device
   02. Run the following commands in a terminal window
         # download the latest adguard home release
         wget static.adguard.com/adguardhome/release/AdGuardHome_linux_arm64.tar.gz
         # extract the downloaded tar.gz
         sudo tar xvf AdGuardHome_linux_arm64.tar.gz
         # change directory into the extracted folder
         cd AdGuardHome
         # install AdGuardHome as a service
         sudo ./AdGuardHome -s install
   03. Open a web browser and navigate to http://DNSorIP:3000
   04. Click the Get Started button
   05. Set the Admin Web Interface and DNS Server network interfaces and ports ≫ Click Next
   06. Enter an admin username and password ≫ Click Next
   07. Click Next on page 4
   08. Click Open Dashboard on the Congratutations page
   09. Log in using the admin username and password created during the install
   10. Welcome to AdGuardHome

Source: github.com/AdguardTeam/AdGuardHome#getting-started

### Connect with me and others ###
★ Discord: discord.com/invite/EzenvmSHW8
★ Reddit: reddit.com/r/i12bretro
★ Twitter: twitter.com/i12bretro

Install AdGuard Home - Cross Platform Pi Hole Alternative - on Armbian

Install Homer Application Dashboard on Linux

$Run MyBB - Open Source Forum Software - in Docker #MyBB #Forum #Docker *** Updated 05/24/2024 Full steps can be found at https://i12bretro.github.io/tutorials/0932.html What is MyBB? MyBB is the free and open source forum software powering thousands of engaging, vibrant, and unique communities across the internet. - https://mybb.com/ Installing Docker 01. Log into the Linux host and run the following commands in a terminal window # install prerequisites sudo apt install apt-transport-https ca-certificates curl software-properties-common gnupg-agent -y # add docker gpg key curl -fsSL https://download.docker.com/linux/$(awk -F= /^ID=/{ print $NF } /etc/os-release)/gpg | sudo apt-key add - # add docker software repository sudo add-apt-repository deb [arch=$(dpkg print-architecture)] https://download.docker.com/linux/$(awk -F= /^ID=/{ print $NF } /etc/os-release) $(lsb_release -cs) stable # install docker sudo apt install docker-ce docker-compose containerd.io -y # enable and start docker service sudo systemctl enable docker && sudo systemctl start docker # add the current user to the docker group sudo usermod -aG docker $USER # reauthenticate for the new group membership to take effect su - $USER Running MyBB Container 01. Continue with the following commands in a terminal window # create working directories mkdir ~/docker/mybb -p && mkdir ~/docker/postgresql -p && mkdir ~/docker/nginx -p # set owner of docker directory sudo chown $USER:$USER ~/docker -R # allow the container to write to working directories sudo chmod a+rwx -R ~/docker/mybb # download the nginx conf file wget -O ~/docker/nginx/default.conf https://gist.githubusercontent.com/kawaii/ed2fbbf11309b8f635a623fa87abce8d/raw/3a5a6e36b238e55aaef519693ca16c82fbafd2fd/default.conf # create containers network docker network create containers # run the postgesql container docker run -d name postgres network containers -p 5432:5432 -e POSTGRES_USER=mybb_rw -e POSTGRES_PASSWORD=My44_rw$ -e POSTGRES_DB=mybb -v ~/docker/postgresql:/var/lib/postgresql/data restart=unless-stopped postgres:latest # run the mybb container docker run -d name mybb -v ~/docker/mybb:/var/www/html:rw network containers restart=unless-stopped mybb/mybb # run nginx webserver container docker run -d name nginx network containers -p 8081:80 -v ~/docker/mybb:/var/www/html:ro -v ~/docker/nginx:/etc/nginx/conf.d:ro restart=unless-stopped nginx 02. Open a web browser and navigate to http://DNSorIP:8081 03. Click Next at the Welcome screen 04. Click Next at the License Agreement 05. Click Next at the Requirements Check 06. Complete the Database Configuration as shown below Database Engine: PostgreSQL Database Server Hostname: postgres Database Username: mybb_rw Database Password: My44_rw$ Database Name: mybb Table Prefix: mybb_ 07. Click Next after the table creation completes 08. Click Next to complete the Table Population 09. Click Next at the Theme Insertion screen 10. Modify the Board Configuration form as needed ≫ Click Next 11. Create an administrator account by entering a Username, Password and Email Address ≫ Click Next 12. Click the Admin Control Panel link 13. Login with the administrator username and password created earlier 14. Welcome to MyBB Documentation: https://github.com/mybb/docker ### Connect with me and others ### ★ Discord: https://discord.com/invite/EzenvmSHW8 ★ Reddit: https://reddit.com/r/i12bretro ★ Twitter: https://twitter.com/i12bretro$

Installing and Setting Up Squid Proxy Server on Debian

Running a Vanilla ChromiumOS VM in Virtualbox

$Run VSCodium Containerized in Docker #VSCodium #Linux #Docker Full steps can be found at https://i12bretro.github.io/tutorials/0985.html What is VSCodium? VSCodium is a clone of Microsoft’s Visual Studio Code. The project’s sole aim is to provide you with ready to use binaries without Microsoft’s telemetry and tracking code. - https://vscodium.com/ Installing Docker 01. Log into the Linux Docker host and run the following commands in a terminal window # install prerequisites sudo apt install apt-transport-https ca-certificates curl software-properties-common gnupg-agent -y # add docker gpg key curl -fsSL https://download.docker.com/linux/$(awk -F= /^ID=/{ print $NF } /etc/os-release)/gpg | sudo apt-key add - # add docker software repository sudo add-apt-repository deb [arch=$(dpkg print-architecture)] https://download.docker.com/linux/$(awk -F= /^ID=/{ print $NF } /etc/os-release) $(lsb_release -cs) stable # install docker sudo apt install docker-ce docker-compose containerd.io -y # enable and start docker service sudo systemctl enable docker && sudo systemctl start docker # add the current user to the docker group sudo usermod -aG docker $USER # reauthenticate for the new group membership to take effect su - $USER Running VSCodium 01. Continue with the following commands in a terminal window # list current uid and gid, note these for later id $user # create working directories mkdir ~/docker/vscodium/{config,code} -p # run the vscodium docker image # replace PUID, GUID with the output of the id $user command above docker run -d name=vscodium cap-add=IPC_LOCK -e PUID=1000 -e PGID=1000 -e TZ=America/New_York -p 8003:3000 -v ~/docker/vscodium/config:/config -v ~/docker/vscodium/code:/code shm-size=1gb restart unless-stopped lscr.io/linuxserver/vscodium:latest 02. Open a web browser and navigate to http://localhost:8003 03. Welcome to VSCodium Source: https://hub.docker.com/r/linuxserver/vscodium ### Connect with me and others ### ★ Discord: https://discord.com/invite/EzenvmSHW8 ★ Reddit: https://reddit.com/r/i12bretro ★ Twitter: https://twitter.com/i12bretro$

Self-hosted Wikipedia Style Wiki with MediaWiki on Debian

Installing Windows Subsystem for Linux (WSL) Inside VirtualBox VM

Install Easy!Appointments - Appointment Scheduler System - on Windows

Create and Apply SSL Certificates for Portainer