Uploaded February 2020 | Updated November 2026, 10 hours ago
Whilst looking through some old issues of Fine Woodworking I've found a few interesting tips from readers. This one displays the use of a plane as a honing guide to sharpen your plane irons. It's not something I had thought of before and even though it may be a practiced method it's new to me!
Generally I use a honing guide to sharpen my plane iron and my chisels but I thought this would be an interesting test but also a way to sharpen for people who dont have access to a honing guide or wish, like me, to try out something a bit different.
Thank you for viewing, check out the various links below if you'd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - twitch.tv/timberanew
Skillshare - skillshare.com/classes/Introduction-to-Letter-Carving-in-Wood-Making-a-Sign/671949912
Instagram - @timberanew instagram.com/timberanew
Facebook - facebook.com/timberanew
Folksy Shop - folksy.com/shops/TimberAnew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
amzn.to/2p4A4Xq - Amazon US
Whilst looking through some old issues of Fine Woodworking I've found a few interesting tips from readers. This one displays the use of a plane as a honing guide to sharpen your plane irons. It's not something I had thought of before and even though it may be a practiced method it's new to me!
Generally I use a honing guide to sharpen my plane iron and my chisels but I thought this would be an interesting test but also a way to sharpen for people who dont have access to a honing guide or wish, like me, to try out something a bit different.
Thank you for viewing, check out the various links below if you'd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - twitch.tv/timberanew
Skillshare - skillshare.com/classes/Introduction-to-Letter-Carving-in-Wood-Making-a-Sign/671949912
Instagram - @timberanew instagram.com/timberanew
Facebook - facebook.com/timberanew
Folksy Shop - folksy.com/shops/TimberAnew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
amzn.to/2p4A4Xq - Amazon US
![Branch Door Handle [Woodworking Project] (Rustic)
I needed a new door handle for my shed and had a hazel branch lying around, so naturally it became a door handle. This is a very quick and simple woodworking project which can easily be achieved in an afternoon.
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US Branch Door Handle [Woodworking Project] (Rustic)](https://i.ytimg.com/vi/avcUKWnHe2k/mqdefault.jpg)

![Acorn and Oak Leaves Relief Carving [Wood carving Project]
I decided to try my hand at some wood carving and chose oak leaves and acorns as my subject matter. Its a bit messy and certainly far from perfect but it was a lot of fun and a good challenge.
I took a reference photo and made an outline on a drawing program and then printed it off, using a pencil as a kind of carbon paper to get the drawing onto the wood. I wanted to take the sides down a little for the relief and so decided to use a V chisel to mark all the lines around the edges.
This was a quite fiddly wood carving project and something Id like to attempt to make again now with hopefully more skill than I had back then!
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US Acorn and Oak Leaves Relief Carving [Wood carving Project]](https://i.ytimg.com/vi/bjTcE2WwX1Q/mqdefault.jpg)

![Mallet & Chisel Pendant [Wood carving project]
Why not carve a pendant from an oak offcut? I realise this is my second carving project in a row...I guess Im in a carving mood! These little carvings were finished with a mineral oil and beeswax paste and then placed onto a leather cord. Its a pretty simple woodworking project that should only take a couple of hours at most.
Ive been using these as key fobs lately, theyre a very nice addition to my shed keys and really make a nice impression. Theres something about wooden keyrings that makes them nice to hold in the hand, comforting almost and its excellent to make something with your own hands. Sometimes just for the sake of making.
If you like live stream woodworking then follow me on Twitch, I stream every Wednesday at 5pm GMT - twitch.tv/timberanew
Thank you for viewing, check out the various links below if youd like to see what else I get up to, thanks a lot!
Twitch - https://twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
Instructables - http://www.instructables.com/member/timberanew Mallet & Chisel Pendant [Wood carving project]](https://i.ytimg.com/vi/c2bLTuWzjQI/mqdefault.jpg)
![From Drawer to Shelf Unit Part 2 [Upcycling Project]
The second and final installment of the Drawer to Shelf Unit build sees all the finishing touches come together and varnish applied. This is a fairly simple DIY shelf project and will satisfy your craving for upcycling furniture (if you have such cravings).
I used pine for the shelves which was from some old shelves of my own. I then used some sapele for the fronts of the drawers recycled from a factory. Dowels from the outside hold the shelves in place.
Thank you for viewing, check out the various links below if youd like to see what else I get up to, thanks a lot!
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
Instructables - http://www.instructables.com/member/timberanew From Drawer to Shelf Unit Part 2 [Upcycling Project]](https://i.ytimg.com/vi/c7ovNpLxGpA/mqdefault.jpg)


![80s Block Game - Number Rumba [Woodworking Project]
A friend of mine wanted me to make her a version of an old game called Number Rumba which is now quite rare and hard to get hold of. Its a simple block game from the 80s where each team has to rearrange their blocks to match whats on a card. The first to rearrange their blocks correctly, wins. The blocks here are made of Oak and the rest is Sapele. I used some enamel paints suitable for toys to paint the blocks. Its a fairly simple woodworking project but should only be attempted if you have the patience to cut and sand 18 blocks!
I would like to point out that I do not own the rights to Number Rumba nor do I claim to.
Thank you for viewing, check out the various links below if youd like to see what else I get up to, thanks a lot!
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
Instructables - http://www.instructables.com/member/timberanew 80s Block Game - Number Rumba [Woodworking Project]](https://i.ytimg.com/vi/dMQlFHKtiE0/mqdefault.jpg)

