Uploaded November 2025 | Updated September 2026, 28 minutes ago
Percipio Robotics strengthened their precision workflows and integration methods through the Mecademic Certified Integrator Program.
See how they advanced their mastery of the Meca500 and MCS500.
👉 hubs.ly/Q03TTWy00
Percipio Robotics strengthened their precision workflows and integration methods through the Mecademic Certified Integrator Program.
See how they advanced their mastery of the Meca500 and MCS500.
👉 hubs.ly/Q03TTWy00


![MCS500 SCARA Safety Integration with ReeR Mosaic Controller | Mecademic
Discover how to safely integrate and operate the MCS500 4-axis industrial SCARA robot using ReeRs safety solutions, including the Mosaic programmable safety controller, safety light curtains, and door interlocks!
Learn how safety stops, automatic restarts, and reduced-speed manual mode operation with a 3-position enabling switch (dead man switch) protect operators without compromising productivity.
⚙️ Safety Operating Modes & Features:
• Auto Mode (High Speed): Emergency stop triggers immediate halts; door interlocks trigger safety stops; light curtains pause motion with automatic clearance restarts
• Manual Mode (Reduced Speed): Operator interaction enabled via a 3-position dead man switch; door and light curtain bypass while switch is held
• Immediate Safety Intervention: Releasing or hard-pressing the dead man switch triggers instant safety stops
• ReeR Safety Hardware: Integrated with ReeR Mosaic programmable safety controller and safety sensors
📌 Chapters:
[00:00] - Introduction to MCS500 SCARA Safety Features
[00:04] - Auto Mode: High-Speed E-Stops, Door Interlocks & Light Curtains
[00:30] - Manual Mode: Reduced-Speed Operation & 3-Position Dead Man Switch
[00:53] - Enabling Switch Safety Intervention & Re-activation
[01:00] - ReeR Mosaic Safety Controller & Sensor Integration
🌐 Explore the MCS500 Industrial SCARA Robot: https://mecademic.com/industrial-robots-mecademic/mcs500-scara-robot/
📩 Contact Application Support: https://www.mecademic.com/contact-us/
#MCS500 #SCARA #ReeRMosaic #MicroAutomation MCS500 SCARA Safety Integration with ReeR Mosaic Controller | Mecademic](https://i.ytimg.com/vi/bJ06Uh1aIFI/mqdefault.jpg)




![Medical Device Micro-Assembly Case Study: Arimation & Cretex Medical | Meca500
Watch how machine builder Arimation Robotics created a custom automated assembly cell for Cretex Medical using the Meca500 6-axis industrial robot arm!
Designed to scale up the manufacturing of miniaturized medical catheter components, this cell replaces tedious manual assembly under microscopes. It integrates the ultra-compact Meca500 (sub-5-micron repeatability), an Asyril Asycube flexible feeding system with EYE+ vision, and a custom 0.1 mm wire-feeding and cutting mechanism.
⚙️ Key Automated Cell Components:
• Robot: Meca500 6-Axis Miniature Industrial Robot (high precision & small footprint)
• Flexible Feeder: Asyril Asycube flex feeder & EYE+ smart vision system
• Custom Tooling: High-precision 0.1 mm wire feeding & cutting mechanism
• Impact: Drives next-generation medical device miniaturization and workforce health
📌 Chapters:
[00:00] - Scaling Medical Micro-Assembly at Cretex Medical
[00:32] - Partnering with Arimation Robotics for Custom Automation
[00:57] - System Architecture: Asyril Flex Feeder, Meca500 & Wire Cutting
[01:34] - The Future of Miniaturization in Medical Device Manufacturing
📖 Read Customer Case Studies: https://www.mecademic.com/case-studies/
🌐 Explore Meca500 Medical Device : https://mecademic.com/solutions/industries/medical-devices/
#MedicalDevice #MicroAssembly #Meca500 #Asyril #MicroAutomation Medical Device Micro-Assembly Case Study: Arimation & Cretex Medical | Meca500](https://i.ytimg.com/vi/esXHWjAZtek/mqdefault.jpg)

![Medical Device Micro-Assembly & Inspection Case Study: Mati Therapeutics | Mecademic
Discover how Mati Therapeutics leverages the Meca500 6-axis industrial robot arm to enhance manufacturing efficiency, precision, and flexibility in ocular medical device assembly and packaging.
Operating inside cleanroom enclosures, the Meca500 handles delicate micro-assembly, vision inspection, testing, and automated pick-and-place packaging for specialized drug delivery systems.
⚙️ Key Automated Operations Featured:
• Micro-Assembly: Precision placement of miniaturized medical components
• Inspection & Quality Control: Integrated sensor verification and testing
• Pick & Place Packaging: High-speed transfers into blister packaging trays
• Compact Footprint: Fits easily inside standard cleanroom workstations
📌 Chapters:
[00:00] - Overview: Medical Device Inspection & Packaging at Mati Therapeutics
[00:07] - Micro-Assembly Application Sequence
[00:18] - Automated Inspection & Quality Testing Integration
[00:32] - Precision Pick & Place Component Transfers
[00:44] - Automated Blister Packaging & Final Tray Placement
📖 Read Customer Case Studies: https://www.mecademic.com/case-studies/
🌐 Explore Meca500 Medical & Life Sciences Solutions: https://www.mecademic.com/solutions/lab-automation/
#MatiTherapeutics #medicaldevice #microassembly #Meca500 #MicroAutomation Medical Device Micro-Assembly & Inspection Case Study: Mati Therapeutics | Mecademic](https://i.ytimg.com/vi/gERulZqzIjc/mqdefault.jpg)
