Uploaded February 2026 | Updated September 2026, 9 minutes ago

---

This instructional video demonstrates a specific technique for reorienting digital design layouts from a horizontal to a vertical format by utilizing rotary job settings. While the process successfully rotates the visual project elements, I highlight that the toolpath directions remain unchanged, continuing their original left-to-right movement. A critical observation made is that shifting to a rotary setup automatically adjusts the material thickness based on the thickness of the stock used in the rotary setup, rather than maintaining the original flat depth. Users are cautioned to monitor these automatic software adjustments to ensure machining accuracy after the conversion. Overall, the source serves as a practical guide for managing orientation shifts while alerting designers to potential technical discrepancies in the final output.


Website: 3Answers.info

If you’ve found this site helpful and would like to support our work, you’re welcome to make a small donation. Your support helps us continue creating tutorials, guides, and resources for the community.
buymeacoffee.com/mezalick

vectric.com
Vectric Tutorials https://www.vectric.com/support/tutor...
Mark Lindsay CNC / @marklindsaycnc
© Michael Mezalick 2025
👇 SUBSCRIBE TO OUR YOUTUBE CHANNEL NOW 👇 / mezalick
This channel is dedicated to sharing information, tips and trick on 3D modeling using the Vectric software.
This channel covers: 👉Vectric Aspire👉 Vectric VCarve 👉 Vectric Desktop 👉 Design Suggestions👉Finishing Solutions
★☆★ CONNECT WITH US ON SOCIAL MEDIA ★☆★ Facebook:
Facebook: (Personal): / michael.mezalick
Website: 3Answers.info