A11 - Life interrupts, but we sneak in another mold of the supercar @BuilderCreator

Uploaded January 2019 | Updated September 2026, 2 weeks ago

Catching up on a little maintenance, and a few breakdowns, put me behind slightly. However, we manage to slip in the production of the number two mold off the Arete Supercar. This video is a brief glimpse at some of those maintenance problems here at home/shop (studio), but mostly a tour of building that number 2 mold, the largest of the car, the rear deck lid (trunk, bonnet, engine cover). Watch again (if you watched the first mold video. Link here - youtu.be/qf6guuJOb6A) the process of building a fiberglass mold of a plug, along with the ingenious clay extrusion parting wall dams I have incorporated into that process.

#BuilderCreator #AreteGT #Supercar #DIY #CarBuild

A11 - Life interrupts, but we sneak in another mold of the supercar

A41 - Nero fiddled, I built an Active-Aero wing. Arete supercar project

Building an expedition truck command center dashboard with the Arc Captain MIG250 welder

A75 Rear hub (upright) part 1- Arete Supercar Project

A50- The added labor of making things better! Arete supercar project

A94 I dont want my scratch built supercar to burn! Heat management, with PTP Turbo Blankets

A36 - Arete Supercar Project- Vacuum bagging Nomex honeycomb cores in place.

A61 Adding rain gutters to the supercar. Arete Supercar build

A71 Okay, so one more foundation layer before the big superstructure layups. Arete Supercar project.

L11 3 Point Mount, Leviathan supervan overlander project