Uploaded July 2025 | Updated November 2026, 4 days ago
Thanks to PCBWay.com/?from=atomic for the fantastic PCBs and SMT assembly.
Forget 104 keys—meet Vibit, the one-button mech keyboard that literally codes itself.
In this build-and-program adventure I take an ESP32-S3 Mini, bolt on a Cherry switch, Li-ion charger and RGB status LEDs, then let AI write all the firmware.
By the end we’ve got a palm-sized macro pad that fires ⌘ + Enter over USB and Bluetooth LE—perfect for your vibe coding sessions!
00:00 PCB Overview – ESP32-S3 Mini, USB-C & Li-ion Charger
01:00 Cherry MX Low-Profile vs Standard Switch Footprints
01:40 Fixing Wobble: Stabilizers & Custom “Vibit” Keycap
03:30 What Is “Vibe Coding”? AI-Generated Firmware Explained
03:53 Vibing up a hardware definition - what GPIOS are we using?
05:13 Let's get it working over USB - our first bit of vibe code
06:52 The vibe code works - USB keyboard is working
07:30 Let's add a bit of refinement to the behaviour
08:12 It's even better - this vibe coding is brilliant!
08:40 Vibing up battery charge status
09:43 Let's add BLE support - we're going wireless!
11:20 So close... but not quite there
13:40 Let's give it a hint - we'll tell it which library to use
14:16 It works! Fully vibe coded USB and BLE keyboard
#mechanicalkeyboard #ESP32 #BluetoothLE #AIcoding #makers #electronics #firmware
---
If you'd like to help support the channel and help me buy more nonsense - I have a Patreon page: patreon.com/atomic14
We've also got a shop now! shop.atomic14.com
And if you're shopping on AliExpress or Amazon then if you click on these links I will get a little bit of affiliate money:
Aliexpress - https://s.click.aliexpress.com/e/_Ac05mF
Amazon - amazon.com/?tag=atomic14-20
You can also join us on Discord here: discord.gg/h2DDnDdjD2
There's also the Atomic14 newsletter here: atomic14.substack.com
And don't forget about the MakerNews newsletter - makernews.substack.com
Thanks to PCBWay.com/?from=atomic for the fantastic PCBs and SMT assembly.
Forget 104 keys—meet Vibit, the one-button mech keyboard that literally codes itself.
In this build-and-program adventure I take an ESP32-S3 Mini, bolt on a Cherry switch, Li-ion charger and RGB status LEDs, then let AI write all the firmware.
By the end we’ve got a palm-sized macro pad that fires ⌘ + Enter over USB and Bluetooth LE—perfect for your vibe coding sessions!
00:00 PCB Overview – ESP32-S3 Mini, USB-C & Li-ion Charger
01:00 Cherry MX Low-Profile vs Standard Switch Footprints
01:40 Fixing Wobble: Stabilizers & Custom “Vibit” Keycap
03:30 What Is “Vibe Coding”? AI-Generated Firmware Explained
03:53 Vibing up a hardware definition - what GPIOS are we using?
05:13 Let's get it working over USB - our first bit of vibe code
06:52 The vibe code works - USB keyboard is working
07:30 Let's add a bit of refinement to the behaviour
08:12 It's even better - this vibe coding is brilliant!
08:40 Vibing up battery charge status
09:43 Let's add BLE support - we're going wireless!
11:20 So close... but not quite there
13:40 Let's give it a hint - we'll tell it which library to use
14:16 It works! Fully vibe coded USB and BLE keyboard
#mechanicalkeyboard #ESP32 #BluetoothLE #AIcoding #makers #electronics #firmware
---
If you'd like to help support the channel and help me buy more nonsense - I have a Patreon page: patreon.com/atomic14
We've also got a shop now! shop.atomic14.com
And if you're shopping on AliExpress or Amazon then if you click on these links I will get a little bit of affiliate money:
Aliexpress - https://s.click.aliexpress.com/e/_Ac05mF
Amazon - amazon.com/?tag=atomic14-20
You can also join us on Discord here: discord.gg/h2DDnDdjD2
There's also the Atomic14 newsletter here: atomic14.substack.com
And don't forget about the MakerNews newsletter - makernews.substack.com








![DIY eBook Reader - Build your own Kindle using an ESP32
Ive been busy playing with another ESP32 based e-Paper display. Once again were sponsored by PCBWay - https://www.PCBWay.com/?from=atomic
There are some interesting aspects to this project:
Were using deep sleep to save on battery - check out my recent video on this subject for a deep dive: https://youtu.be/YOjgZUg_skU
Were also using an SD Card in SPI mode using a few of the spare GPIO pins on the board - weve covered this previously in this video: https://youtu.be/bVru6M862HY
Parsing, layout out and rendering ePub files is pretty interesting. Its a good challenge to try and get this working nicely on embedded devices like the ESP32.
[0:00] Introduction/demo
[1:07] ePub format overview
[1:34] Whats inside an ePub file?
[1:49] The content.opf file
[2:20] ePub components
[2:32] Challenges
[2:55] Getting ePub files onto the device
[3:08] Touch screen failure
[3:24] Listing files on an SD Card
[3:33] Enabling long files names in the ESP-IDF
[3:51] Reading ZIP archives on the ESP32
[4:15] Parsing the content.opf file to get the book structure
[4:56] Should we build a web browser?
[5:34] Parsing the XHTML content
[5:52] Laying out the content
[7:28] Deep sleep
[7:41] Show me the code!
Everything is on GitHub here: https://github.com/atomic14/diy-esp32-epub-reader
If youve got an ESP32 based ePaper display then please give it a go!
You can get the LilyGO board Im using from here: https://s.click.aliexpress.com/e/_9u8DGd (affiliate link)
Patreon: https://www.patreon.com/atomic14
ko-fi: https://ko-fi.com/atomic14 DIY eBook Reader - Build your own Kindle using an ESP32](https://i.ytimg.com/vi/VLiCgB0odOQ/mqdefault.jpg)

