chilicoke | 3D Printer nozzle cam! Not the fastest Benchy, but bet you've never seen one print this close up @chilicoke | Uploaded December 2020 | Updated October 2024, 3 hours ago.
This is a full print test of my prototype nozzle cam. I will be incorporating what I've learn from building this into my next Voron build, better integrated of course.
At some point the audio got off-synced, also found some cracks in my very used and very worn Mobius extruder. Will slowly build and test each components of my upcoming redesigned print head.
Still got tons of challenges to over come. Camera wire flexibility/durability/interference is still a big issue, video performance from printer mounted Pi is poor and still needs more testing. My goal is to eventually have everything self contained within the printer self itself.
0:00 nozzle purge
6:59 fast infill
34:16 solid top layer
1:26:18 porthole bridging
1:39:33 more porthole bridging
1:46:28 roof bridging
1:53:29 chimney
1:55:33 slow chimney for additional cooling time
2:01:07 finished Benchy
This is a full print test of my prototype nozzle cam. I will be incorporating what I've learn from building this into my next Voron build, better integrated of course.
At some point the audio got off-synced, also found some cracks in my very used and very worn Mobius extruder. Will slowly build and test each components of my upcoming redesigned print head.
Still got tons of challenges to over come. Camera wire flexibility/durability/interference is still a big issue, video performance from printer mounted Pi is poor and still needs more testing. My goal is to eventually have everything self contained within the printer self itself.
0:00 nozzle purge
6:59 fast infill
34:16 solid top layer
1:26:18 porthole bridging
1:39:33 more porthole bridging
1:46:28 roof bridging
1:53:29 chimney
1:55:33 slow chimney for additional cooling time
2:01:07 finished Benchy