Uploaded February 2024 | Updated November 2026, 3 hours ago
In this video I'm experimenting with a 3D print, alcohol ink, resin and glitter.
Please don't forget to like, subscribe and comment. Keep on scrolling for a list of products that I used. And as always, thank you for watching.
***Disclosure: I only recommend products I would use myself and all opinions expressed here are my own. This description box may contain discount codes and affiliate links that at no additional cost to you. I am in no way responsible for the way you use your products. Follow all safety instructions of the manufacturers, I cannot be held liable for any misuse or reactions to products I recommend and use myself.
LETS GET SOCIAL!
You can follow me on GMI's superstars page
https://www.facebook.com/groups/gmisu...
or my FB Group - https://www.facebook.com/groups/56479...
or
IG - @its_acraftthing
SUPPLIES
Glitter
Glitter Color used - Ultra Fine Shimmer
Glitter - https://glittermakesit.com/collection...
Enter code "itsacraftthing30" for a 30% off entire glitter order!
3D print of your choice. I designed a simple coaster using Kingroon white PLA and printed on a Bambu Lab A1 printer.
Epoxy of your choice
Paper towels
Soft bristle brush
Alcohol inks - amazon.com/Alcohol-Ink-Set-Alcohol-based-Concentrated/dp/B082G557CR/ref=sr_1_2?crid=21YKEKIWJA728&dib=eyJ2IjoiMSJ9.I1fGYP5BXmpLU6ey1pDJmV1YlFH-B-P0SUgTe0fFaBr9VEbRA2smzMg2yjdMuYDxlmqfXQJNCWweTRU7h0WaV43NvmqHlXOXUjMPhxCujQO-SO3kID24REDdJubsHdRDH3FGKCcVHrxpMOiD5NbHsEC7oEPOiPhUbrCxem3k5KlcKYrPUwisuE5SM3Y9Rk0blHNo_pex9or0Flz4pxkhNO7Vf8aS9ZSVXAC2PgHWYIUU7YhR-lY8KaY-z257p7SSCfUdojf4PlJAOlB23IcYzdmfh7sofeTChNnYzWBryIM.QDe_ST12dPNR0DXM9-wRM6GwnrAyCxPF9sWEX2DqZWM&dib_tag=se&keywords=alcohol%2Binks&qid=1708450307&sprefix=alcohol%2Binks%2Caps%2C135&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1
Tools typically used - Craft knife, 120 grit sandpaper and 180 to 220 for finer sanding after the 120. Scissors, weeding tools, transfer tape. 91% alcohol, paint or makeup brushes, mod podge, dusk mask, chemical mask, gloves.
As always, I try to list everything I use but if I forget something, please do not hesitate to ask in the comments below.
In this video I'm experimenting with a 3D print, alcohol ink, resin and glitter.
Please don't forget to like, subscribe and comment. Keep on scrolling for a list of products that I used. And as always, thank you for watching.
***Disclosure: I only recommend products I would use myself and all opinions expressed here are my own. This description box may contain discount codes and affiliate links that at no additional cost to you. I am in no way responsible for the way you use your products. Follow all safety instructions of the manufacturers, I cannot be held liable for any misuse or reactions to products I recommend and use myself.
LETS GET SOCIAL!
You can follow me on GMI's superstars page
https://www.facebook.com/groups/gmisu...
or my FB Group - https://www.facebook.com/groups/56479...
or
IG - @its_acraftthing
SUPPLIES
Glitter
Glitter Color used - Ultra Fine Shimmer
Glitter - https://glittermakesit.com/collection...
Enter code "itsacraftthing30" for a 30% off entire glitter order!
3D print of your choice. I designed a simple coaster using Kingroon white PLA and printed on a Bambu Lab A1 printer.
Epoxy of your choice
Paper towels
Soft bristle brush
Alcohol inks - amazon.com/Alcohol-Ink-Set-Alcohol-based-Concentrated/dp/B082G557CR/ref=sr_1_2?crid=21YKEKIWJA728&dib=eyJ2IjoiMSJ9.I1fGYP5BXmpLU6ey1pDJmV1YlFH-B-P0SUgTe0fFaBr9VEbRA2smzMg2yjdMuYDxlmqfXQJNCWweTRU7h0WaV43NvmqHlXOXUjMPhxCujQO-SO3kID24REDdJubsHdRDH3FGKCcVHrxpMOiD5NbHsEC7oEPOiPhUbrCxem3k5KlcKYrPUwisuE5SM3Y9Rk0blHNo_pex9or0Flz4pxkhNO7Vf8aS9ZSVXAC2PgHWYIUU7YhR-lY8KaY-z257p7SSCfUdojf4PlJAOlB23IcYzdmfh7sofeTChNnYzWBryIM.QDe_ST12dPNR0DXM9-wRM6GwnrAyCxPF9sWEX2DqZWM&dib_tag=se&keywords=alcohol%2Binks&qid=1708450307&sprefix=alcohol%2Binks%2Caps%2C135&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1
Tools typically used - Craft knife, 120 grit sandpaper and 180 to 220 for finer sanding after the 120. Scissors, weeding tools, transfer tape. 91% alcohol, paint or makeup brushes, mod podge, dusk mask, chemical mask, gloves.
As always, I try to list everything I use but if I forget something, please do not hesitate to ask in the comments below.










