Uploaded March 2024 | Updated September 2026, 3 weeks ago
In this video I'm showing you how I combined a resin tumbler with a 3d printed goblet.
Please don't forget to like, subscribe and comment. Keep on scrolling for a list of products that I used. And as always, thank you for watching.
***Disclosure: I only recommend products I would use myself and all opinions expressed here are my own. This description box may contain discount codes and affiliate links that at no additional cost to you. I am in no way responsible for the way you use your products. Follow all safety instructions of the manufacturers, I cannot be held liable for any misuse or reactions to products I recommend and use myself.
LETS GET SOCIAL!
You can follow me on GMI's superstars page
https://www.facebook.com/groups/gmisu...
or my FB Group - https://www.facebook.com/groups/56479...
or
IG - @its_acraftthing
SUPPLIES
Glitter
Glitter Color used - Gold Rush
Glitter - https://glittermakesit.com/collection...
Enter code "itsacraftthing30" for a 30% off entire glitter order!
Stainless Steel Wine cup
thestainlessdepotcompany.com
If you prefer Makerflo brand tumblers, here is my affiliate link.
https://makerflocrafts.com?sca_ref=58...
Epoxy of your choice with an 8 to 12 hour cure time.
Spray Paint - I used and prefer Rustoleum metallic gold
Aleen's Tack-It-Over and Over - Michael's Arts and Crafts
Alcohol Ink - colors of your choice. I used 3 different greens. All different brands.
White Pigment Paste - amazon.com/HTVRONT-White-Resin-Pigment-Paste/dp/B09NYDRMYX/ref=sr_1_1?crid=2GOXNW9PSX5WD&dib=eyJ2IjoiMSJ9.gZi5SgnJvbrVMTlyLYskYOE9zQseFFg4XVOd0Ea5plMRD1tnSaVVAMNSVvE7CHuRwC6v7xfb31XIjCTWtlESVbTCFMECVb_WX4ttb_rSPyH3mj1d2SxYo9FPrR0RbTwBaGowF6RTgqdrt4p9KSLO9bcgwCsNw2NamwyioM0R0761b76lEAmGnHnsqrbhr1LI5b3IYTzo2rIhUYOM8rWQaMhBw3oNHo9GaSooPLDyd-JAEYsTw8siMoKwMEHxY-HUaO4_IBfq-ey6-ridlbXC00ctOHhWqN2LWq4tkcYryp8.V58HN9V4ihpUMubV9ly5qJwAoM9TDX0HnQ9cGsnpHCQ&dib_tag=se&keywords=white+pigment+paste&qid=1709423499&sprefix=white+pigment+paste%2Caps%2C173&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1
Designer of Goblet - Kerry Martin (wildwoodia)
thingiverse.com/thing:5914656
Tools typically used - Craft knife, 120 grit sandpaper and 180 to 220 for finer sanding after the 120. Scissors, weeding tools, transfer tape. 91% alcohol, paint or makeup brushes, mod podge, dusk mask, chemical mask, gloves.
Rotary Tool - https://www.amazon.com/Cordless-Acces...
Display turner - Turner - https://www.amazon.com/Rotating-Autom...
As always, I try to list everything I use but if I forget something, please do not hesitate to ask in the comments below.
In this video I'm showing you how I combined a resin tumbler with a 3d printed goblet.
Please don't forget to like, subscribe and comment. Keep on scrolling for a list of products that I used. And as always, thank you for watching.
***Disclosure: I only recommend products I would use myself and all opinions expressed here are my own. This description box may contain discount codes and affiliate links that at no additional cost to you. I am in no way responsible for the way you use your products. Follow all safety instructions of the manufacturers, I cannot be held liable for any misuse or reactions to products I recommend and use myself.
LETS GET SOCIAL!
You can follow me on GMI's superstars page
https://www.facebook.com/groups/gmisu...
or my FB Group - https://www.facebook.com/groups/56479...
or
IG - @its_acraftthing
SUPPLIES
Glitter
Glitter Color used - Gold Rush
Glitter - https://glittermakesit.com/collection...
Enter code "itsacraftthing30" for a 30% off entire glitter order!
Stainless Steel Wine cup
thestainlessdepotcompany.com
If you prefer Makerflo brand tumblers, here is my affiliate link.
https://makerflocrafts.com?sca_ref=58...
Epoxy of your choice with an 8 to 12 hour cure time.
Spray Paint - I used and prefer Rustoleum metallic gold
Aleen's Tack-It-Over and Over - Michael's Arts and Crafts
Alcohol Ink - colors of your choice. I used 3 different greens. All different brands.
White Pigment Paste - amazon.com/HTVRONT-White-Resin-Pigment-Paste/dp/B09NYDRMYX/ref=sr_1_1?crid=2GOXNW9PSX5WD&dib=eyJ2IjoiMSJ9.gZi5SgnJvbrVMTlyLYskYOE9zQseFFg4XVOd0Ea5plMRD1tnSaVVAMNSVvE7CHuRwC6v7xfb31XIjCTWtlESVbTCFMECVb_WX4ttb_rSPyH3mj1d2SxYo9FPrR0RbTwBaGowF6RTgqdrt4p9KSLO9bcgwCsNw2NamwyioM0R0761b76lEAmGnHnsqrbhr1LI5b3IYTzo2rIhUYOM8rWQaMhBw3oNHo9GaSooPLDyd-JAEYsTw8siMoKwMEHxY-HUaO4_IBfq-ey6-ridlbXC00ctOHhWqN2LWq4tkcYryp8.V58HN9V4ihpUMubV9ly5qJwAoM9TDX0HnQ9cGsnpHCQ&dib_tag=se&keywords=white+pigment+paste&qid=1709423499&sprefix=white+pigment+paste%2Caps%2C173&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1
Designer of Goblet - Kerry Martin (wildwoodia)
thingiverse.com/thing:5914656
Tools typically used - Craft knife, 120 grit sandpaper and 180 to 220 for finer sanding after the 120. Scissors, weeding tools, transfer tape. 91% alcohol, paint or makeup brushes, mod podge, dusk mask, chemical mask, gloves.
Rotary Tool - https://www.amazon.com/Cordless-Acces...
Display turner - Turner - https://www.amazon.com/Rotating-Autom...
As always, I try to list everything I use but if I forget something, please do not hesitate to ask in the comments below.
