Uploaded November 2021 | Updated September 2026, 2 weeks ago
Recently I got and setup the MakeBlock xTool D1 laser... and then I broke it. Follow along as I show what I broke, how I desigend a fix part, and installing the upgraded parts in place.
3D printing can help to solve real world problems in a quick and practical way. Jump into Fusion 360, design a part to 3D print, head to your Printer, produce the final 3D printed part and install it! A big headache that was avoided quickly with just a little ingenuity and a 3d printer!
D1 80mm Adapter: thangs.com/MandicReally/XTool-D1-Laser-80mm-Fan-Adapter--Makeblock-Laser-Cutter-Upgrade-37074
TimeStamps:
0:00 - Intro
0:40 - What Broke?
1:36 - Parts to Fix it?
2:23 - Fusion 360 Designing
4:06 - Wiring the Fan
5:30 - Adapter Install
7:00 - Noise Sample
7:15 - Test Run
7:38 - Results
8:19 - Outro
------------------------------------------------------------------------------------------------
(Affiliate Links):
xTool D1 Laser: amzn.to/3xdMez4
80mm Noctua Fan: amzn.to/32fj0o5
M3 Screws: amzn.to/3yXDjBY
Elegoo Neptune 2: amzn.to/3x0vhXd
AutoDesk Fusion 360: tinyurl.com/ADfusion360
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/2U4b1nZ
*** Video Recorder Used: amzn.to/30cAvU9
*** Action Camera: amzn.to/2ATHS73
*** Second Camera: amzn.to/371EhBM
*** B-Roll Lens: amzn.to/2xmg85L
*** Wide Angle Lens: amzn.to/2YiZTmH
*** Slider: amzn.to/3nGZ1Uh
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2IjTJiB
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** RGB Lights: amzn.to/2UUGAOk
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
#MandicReally #3DPrinting #xToolD1
Recently I got and setup the MakeBlock xTool D1 laser... and then I broke it. Follow along as I show what I broke, how I desigend a fix part, and installing the upgraded parts in place.
3D printing can help to solve real world problems in a quick and practical way. Jump into Fusion 360, design a part to 3D print, head to your Printer, produce the final 3D printed part and install it! A big headache that was avoided quickly with just a little ingenuity and a 3d printer!
D1 80mm Adapter: thangs.com/MandicReally/XTool-D1-Laser-80mm-Fan-Adapter--Makeblock-Laser-Cutter-Upgrade-37074
TimeStamps:
0:00 - Intro
0:40 - What Broke?
1:36 - Parts to Fix it?
2:23 - Fusion 360 Designing
4:06 - Wiring the Fan
5:30 - Adapter Install
7:00 - Noise Sample
7:15 - Test Run
7:38 - Results
8:19 - Outro
------------------------------------------------------------------------------------------------
(Affiliate Links):
xTool D1 Laser: amzn.to/3xdMez4
80mm Noctua Fan: amzn.to/32fj0o5
M3 Screws: amzn.to/3yXDjBY
Elegoo Neptune 2: amzn.to/3x0vhXd
AutoDesk Fusion 360: tinyurl.com/ADfusion360
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/2U4b1nZ
*** Video Recorder Used: amzn.to/30cAvU9
*** Action Camera: amzn.to/2ATHS73
*** Second Camera: amzn.to/371EhBM
*** B-Roll Lens: amzn.to/2xmg85L
*** Wide Angle Lens: amzn.to/2YiZTmH
*** Slider: amzn.to/3nGZ1Uh
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2IjTJiB
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** RGB Lights: amzn.to/2UUGAOk
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
#MandicReally #3DPrinting #xToolD1
