Uploaded December 2024 | Updated September 2026, 2 hours ago
3D Engraving, Metal Cutting & Spot Welding W/ ComMarker B6 Fiber Laser Engraver
In this video we're going to take a look at ComMarker's B6 galvo laser engraver. This machine comes with either a 20w, 30W or 50W fiber laser for marking, engraving and cutting almost any metal from steel, aluminum and brass to silver, gold and titanium up to 1.5mm thick, as well as most plastics. It has a max engraving speed up to 15,000mm/s with an accuracy of 0.01mm, and includes an led touchscreen and both manual focus adjustment and autofocus. It has an estimated service life of up to 100,000 hrs and it's semi portable with the ability to split the laser module from the controller base and it's almost half the physical size and weight of ComMarker's B4 fiber laser series which I've reviewed on this channel previously and are excellent machines. It's also compatible with ComMarker's chuck and roller rotaries and includes both a foot pedal switch and a rotary driver to facilitate those accessories and make batch processing quick and easy.
Get the B6:
store.commarker.com/products/b6-metal-fiber-laser-engraver?ref=at2dg_X0qLKhdS
Get the B6 JPT MOPA:
store.commarker.com/products/b6-jpt-mopa-fiber-laser-engraver?ref=at2dg_X0qLKhdS
store.commarker.com/?ref=at2dg_X0qLKhdS
Chapters
00:00 - Intro
00:34 - Unboxing & assembly
01:35 - Setup in Lightburn software
02:10 - Autofocus
02:40 - Marking stainless steel
04:04 - Marking aluminum
04:40 - Marking brass
05:22 - Marking zinc
05:40 - Hi-res photo on anodized aluminum
06:19 - Marking acrylic
06:50 - Hi-res photo on acrylic
07:13 - 2.5D engraving
08:22 - 2.5D colour engraving
08:54 - 3D engraving metal
09:34 - 3D engraving stone
10:15 - Thin metal cutting
11:17 - Thick metal cutting
12:27 - PCB processing
13:30 - Welding
14:18 - Final thoughts
3D Engraving, Metal Cutting & Spot Welding W/ ComMarker B6 Fiber Laser Engraver
In this video we're going to take a look at ComMarker's B6 galvo laser engraver. This machine comes with either a 20w, 30W or 50W fiber laser for marking, engraving and cutting almost any metal from steel, aluminum and brass to silver, gold and titanium up to 1.5mm thick, as well as most plastics. It has a max engraving speed up to 15,000mm/s with an accuracy of 0.01mm, and includes an led touchscreen and both manual focus adjustment and autofocus. It has an estimated service life of up to 100,000 hrs and it's semi portable with the ability to split the laser module from the controller base and it's almost half the physical size and weight of ComMarker's B4 fiber laser series which I've reviewed on this channel previously and are excellent machines. It's also compatible with ComMarker's chuck and roller rotaries and includes both a foot pedal switch and a rotary driver to facilitate those accessories and make batch processing quick and easy.
Get the B6:
store.commarker.com/products/b6-metal-fiber-laser-engraver?ref=at2dg_X0qLKhdS
Get the B6 JPT MOPA:
store.commarker.com/products/b6-jpt-mopa-fiber-laser-engraver?ref=at2dg_X0qLKhdS
store.commarker.com/?ref=at2dg_X0qLKhdS
Chapters
00:00 - Intro
00:34 - Unboxing & assembly
01:35 - Setup in Lightburn software
02:10 - Autofocus
02:40 - Marking stainless steel
04:04 - Marking aluminum
04:40 - Marking brass
05:22 - Marking zinc
05:40 - Hi-res photo on anodized aluminum
06:19 - Marking acrylic
06:50 - Hi-res photo on acrylic
07:13 - 2.5D engraving
08:22 - 2.5D colour engraving
08:54 - 3D engraving metal
09:34 - 3D engraving stone
10:15 - Thin metal cutting
11:17 - Thick metal cutting
12:27 - PCB processing
13:30 - Welding
14:18 - Final thoughts
