Uploaded January 2021 | Updated November 2026, 3 days ago
30V-4A Adjustable/Variable Power Supply Circuit/Schematic and PCB [CV, CC]
==========================================
In this video, I explained a low noise/ripple adjustable/variable linear power supply circuit/schematic/PCB. It is based on the LM339 regulator and IRLZ44 N-Channel Mosfet. This power supply circuit/schematic/PCB offers constant current and constant voltage features. the input voltage could be anything between 3V to 35V and the output voltage could be between 1.28V to 30V. This power supply has been build on a two layers PCB board and all component packages are through-hole. The PCBs have been fabricated by the PCBWay company. The output noise of the power supply has been examined using the Siglent SDS2102X plus (SDS2000X Plus Series) oscilloscope. This oscilloscope offers a handy function named Power Analysis that can be used to examine the output noise/ripple. The output voltage is highly regulated as we expect from a linear power supply. All laboratory supplies are linear. A linear power supply offers better line regulation and load regulation and lower noise, although they are not efficient, in comparison with switching power supplies.
==========================================
Altium Designer: altium.com/yt/myvanitar
==========================================
Article: pcbway.com/blog/technology/30V_4A_Adjustable_Power_Supply__CC_CV_.html
==========================================
Check other videos: bit.ly/2N9OlPa
==========================================
Tools:
Siglent SDM3045X:siglenteu.com/digital-multimeters/sdm3045x-digital-multimeter
Siglent SDS2102X Plus: siglenteu.com/digital-oscilloscopes/sds2000xp
==========================================
Inspired by:
GreatScott!
Build your own Variable Lab Bench Power Supply
URL: youtube.com/watch?v=wI-KYRdmx-E
Inspired by:
EEVblog
EEVblog #221 - Lab Power Supply Design - Part 1
URL: youtube.com/watch?v=CIGjActDeoM
Inspired by:
Electronoobs
DIY variable bench power supply (less than 10$)
URL: youtube.com/watch?v=WeYK2gY4z-A
30V-4A Adjustable/Variable Power Supply Circuit/Schematic and PCB [CV, CC]
==========================================
In this video, I explained a low noise/ripple adjustable/variable linear power supply circuit/schematic/PCB. It is based on the LM339 regulator and IRLZ44 N-Channel Mosfet. This power supply circuit/schematic/PCB offers constant current and constant voltage features. the input voltage could be anything between 3V to 35V and the output voltage could be between 1.28V to 30V. This power supply has been build on a two layers PCB board and all component packages are through-hole. The PCBs have been fabricated by the PCBWay company. The output noise of the power supply has been examined using the Siglent SDS2102X plus (SDS2000X Plus Series) oscilloscope. This oscilloscope offers a handy function named Power Analysis that can be used to examine the output noise/ripple. The output voltage is highly regulated as we expect from a linear power supply. All laboratory supplies are linear. A linear power supply offers better line regulation and load regulation and lower noise, although they are not efficient, in comparison with switching power supplies.
==========================================
Altium Designer: altium.com/yt/myvanitar
==========================================
Article: pcbway.com/blog/technology/30V_4A_Adjustable_Power_Supply__CC_CV_.html
==========================================
Check other videos: bit.ly/2N9OlPa
==========================================
Tools:
Siglent SDM3045X:siglenteu.com/digital-multimeters/sdm3045x-digital-multimeter
Siglent SDS2102X Plus: siglenteu.com/digital-oscilloscopes/sds2000xp
==========================================
Inspired by:
GreatScott!
Build your own Variable Lab Bench Power Supply
URL: youtube.com/watch?v=wI-KYRdmx-E
Inspired by:
EEVblog
EEVblog #221 - Lab Power Supply Design - Part 1
URL: youtube.com/watch?v=CIGjActDeoM
Inspired by:
Electronoobs
DIY variable bench power supply (less than 10$)
URL: youtube.com/watch?v=WeYK2gY4z-A
![🔶 High Precision Digital AC Energy Meter Circuit [Voltage, Current, Power, KWh]
A Digital AC Energy Meter Circuit [AC Voltage, AC RMS Current, AC Active Power, AC Energy, AC Power Factor, AC Apparent Power, KWh] using Arduino Nano and HLW8032
Altium Designer + License (Free): https://www.altium.com/yt/myvanitar
OctoPart: https://octopart.com
Article: https://www.pcbway.com/blog/technology/High_Precision_Digital_AC_Energy_Meter_Circuit_Voltage_Current_Power_KWh_3a6bf090.html
Disclaimer: Some parts of this circuit carry 220V Mains voltage. Be careful with your experiments. If you are a beginner, ask some experienced users to guide you.
Dealing with the 220V-AC mains voltage and measuring the AC loads true power, voltage, and current parameters are always considered a big challenge for electronic designers, both in circuit design and calculations. The situation gets more complex when we deal with the inductive loads because inductive loads alter the sine-wave shape of the AC signal (resistive loads don’t).
In this article/video, I introduced a circuit that can measure the AC voltage, RMS current, active power, apparent power, power factor, and energy consumption (KWh) of the loads. I used an Arduino-Nano board as a processor to make this more educational-friendly and attractive even for beginners. The device independently measures the aforementioned parameters and displays the results on a 4*20 LCD. The measurement error rate is around 0.5% or even lower.
To design the schematic and PCB, I used Altium designer 22 and installed the missing component libraries using Altium’s manufacturer part search tool. Besides, the Octopart website allowed me to quickly gather information about the components and build a BOM for the project. To get high-quality fabricated boards, I sent the Gerber files to PCBWay and used the Siglent SDM3045X benchtop multimeter for calibrating the device.
Its a cool device to be used in everyday electronics, so let’s get started :-) 🔶 High Precision Digital AC Energy Meter Circuit [Voltage, Current, Power, KWh]](https://i.ytimg.com/vi/1I6Bz7_DOGs/mqdefault.jpg)





![12V Flyback DC-DC Converter Circuit Using UCC28881
12V Flyback DC-DC Converter Circuit Using UCC28881 | Wide Input Range (70V–230V) | Design, PCB & Test Results
Altium Develop (Free Legal License): https://www.altium.com/yt/MyVanitar
Article:
Schematic & PCB: https://365.altium.com/files/9AE78C4D-C20F-4442-BF5C-AF20FD354121
Other Videos: http://bit.ly/2N9OlPa
@AtiumOfficial
#altiumstories
This video walks through the complete design, layout, and testing of a non-isolated flyback DC-DC converter built around the Texas Instruments UCC28881 controller. I designed the schematic and PCB using Altium Develop.
You’ll learn how to design a 12V output converter that operates from a 70V to 230V DC input, with a continuous output current of up to 400mA. This project covers every design detail—from schematic explanations, snubber network, and PCB layout best practices to transformer winding and real-world lab testing.
It’s a great reference for power electronics hobbyists, SMPS designers, and engineers looking to understand DC-DC converters built around integrated high-voltage controllers.
Topics covered:
UCC28881 architecture and key features
Full schematic explanation
PCB layout tips for low EMI and high stability
RCD snubber design for MOSFET protection
Transformer design and placement
Bench testing and oscilloscope waveforms
📘 Resources, Tools, and Instruments Used:
Texas Instruments UCC28881 Datasheet: [TI Official Website]
Siglent SDS1104X-E oscilloscope
Altium Develop Software
Siglent SDL1020X-E DC Load
Siglent SDM3045X Multimeter
Variable AC Transformer (Variac)
🔔 Subscribe for more electronics design and PCB layout tutorials! 12V Flyback DC-DC Converter Circuit Using UCC28881](https://i.ytimg.com/vi/3G_nNjnJmqE/mqdefault.jpg)


![Differential Signal Measurement Using A Digital Oscilloscope [ADSL2+]
Differential Signal Measurement Using A Digital Oscilloscope [Examining the ADSL2+]
in this video, you gonna learn to how to measure differential signals using an oscilloscope. You can apply this method to examine other differential signals as well.
Article source: http://bit.ly/2Z7sDTt
Support me on Patreon: https://www.patreon.com/myvanitar
Check other videos: http://bit.ly/2N9OlPa
Single-Ended Transmission
Single-ended signaling is a simple and common way of transmitting electrical signals from a sender to a receiver. The signal is ground referenced (0 Volt) and one conductor (wire) carries the signal and one conductor carries the common reference potential. The current associated with the signal travels from sender to receiver and returns to the power supply through the shared ground connection. If multiple signals are transmitted, the carrier requires one wire for each transmission line plus one shared ground reference. Figure-1 shows the single-ended signaling topology.
Differential Signaling
Differential transmission is less common than single-ended transmission. It uses two transmission lines which sometimes accompanies with a third reference (ground) line. One transmission line of the differential pair is used to carry the signal and another line is used to carry the inverted signal. The receiver extracts the information by calculating the potential difference between the inverted and non-inverted signals. Both inverted and non-inverted signals are balanced, it means they carry the same potential, but with opposite polarity. By this strategy, the majority of the induced external noise on the transmission lines will be subtracted and canceled on the receiver side.
With differential signaling, the sender and receiver dont necessarily share a common ground reference. However, the use of differential signaling does not mean that using a ground reference has no positive effect on the line quality. When several transmission lines are used, it is absolutely beneficial to use a ground reference, in accompany with a pair for each differential signal. Figure-2 shows the differential signaling topology.
#differential_signal_measurement Differential Signal Measurement Using A Digital Oscilloscope [ADSL2+]](https://i.ytimg.com/vi/4SYRt3eMn8k/mqdefault.jpg)
