2GIG Edge: Arming Away @AlarmGrid
2GIG Edge: Arming Away  @AlarmGrid
Uploaded January 2026 | Updated September 2026, 2 weeks ago
In this video, Dylan from Alarm Grid shows you how to arm the 2GIG Edge in Away Mode. This arming option is used when all occupants of the protected premises are leaving. Typically, the last one to leave arms the system in this mode. In Away Mode, all zones are active, including interior zones, such as motion detectors. After watching this video, you will know how to arm the system in Away Mode using the panel, a remote keypad, or a key fob, and the behavior to expect from the panel when arming and disarming.

For even more information about arming, check out our FAQ, linked below!

0:00 - Intro
0:49 - Arm via Touchscreen
2:41 - Disarm w/Entry Delay
3:35 - Fail to Disarm/Alarm
4:50 - Transmission Delay
5:09 - Arm/Disarm from PAD1-345
6:24 - Arm/Disarm via key fob
7:04 - Outro

๐ŸšจGet Monitored! http://alrm.gd/get-monitored
๐Ÿ”” Subscribe to Alarm Grid: youtube.com/c/AlarmGrid?sub_confirmation=1
โ–ถ 2GIG Edge: Overview: youtube.com/watch?v=JVxxQrsro6w&list=PL5jRrn_Y1aOUSRudfhUuy91yT3soeTBzI
๐Ÿ“– Related FAQ: How Do I Arm Away my 2GIG Edge?: alarmgrid.com/faq/how-do-i-arm-away-my-2gig-edge

There is a surprising amount of information that goes along with properly arming any security system, including the 2GIG Edge. From setting the proper entry and exit delay periods that are not too long, but not too short, to understanding the difference between arming Away or Stay, it's no wonder people are often intimidated by their alarm panel. Our videos are meant to take the mystery out of using your system.

After watching this video, you'll know what to expect when arming and disarming your 2GIG Edge system. Dylan shows you how to arm and disarm using the panel touchscreen, the PAD1-345 wireless push button keypad, and a wireless key fob. You'll see what to expect from exit and entry delay. He even shows you what happens if you fail to disarm the system after walking through an entry door. This should take a lot of the mystery out of using the 2GIG Edge.

#AlarmGrid #2GigEdge #HomeSecurity #DiySecurity #SmartHome

http://alrm.gd/get-monitored
2GIG Edge: Arming Away2GIG Edge: Powering Down Properly2GIG EDGE: Default Installer CodeResideo Skybell: Tech Tip 12 Enrollment via Android2GIG GC2: Upgrading to LTEAugust Smart Lock Pro: Connecting to WIFIPROA7 or PROA7PLUS: Awareness Zone TypesGlass Break Sound (3 minutes)Glass Break SoundHoneywell Home PROA7PLUS: Installing PROTAKEOVER2GIG ANT5XL GC2: No Adaptor Needed for LTE CommunicatorQolsys IQ Panel 4: Enable Panel Glass Break
Alarm Grid |

2GIG Edge: Arming Away

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER