Uploaded January 2026 | Updated September 2026, 2 weeks ago
In this video, Dylan from Alarm Grid tells you about the default Installer Code for the 2GIG Edge. The Installer Code is required to program zones and other panel-specific fields such as entry and exit delays. After watching this video you'll know what the default Installer Code is for the 2GIG Edge and how to use it to enter various programming fields.
0:00 - Intro
0:27 - Default Installer Code
1:12 - Installer Toolbox
1:29 - Panel Programming
1:54 - Z-Wave Settings
2:17 - System Tests
2:46 - Camera Settings
2:57 - Onboard Demo Video
3:05 - Restore Defaults
3:26 - Outro
🚨Get Monitored! http://alrm.gd/get-monitored
🔔 Subscribe to Alarm Grid: youtube.com/c/AlarmGrid?sub_confirmation=1
â–¶ 2GIG Edge: Overview: youtube.com/watch?v=JVxxQrsro6w&list=PL5jRrn_Y1aOUSRudfhUuy91yT3soeTBzI
📖 Related FAQ: What Is the Default Installer Code on a 2GIG Edge?: alarmgrid.com/faq/what-is-the-default-installer-code-on-a-2gig-edge
If the Installer Code in your 2GIG Edge has been changed, and you don't know the code, you may be able to get it reset by calling the installing alarm dealer, or contacting your own alarm company to register the panel. If you opt to contact the original installing dealer, expect them to try and sign you up for monitoring. If you don't want to sign up, they should at least be able to set the Installer Code back to default for you so that you can move forward.
If you have no luck with the original company and decide to find your own monitoring solution, there's a good chance any alarm dealer that supports Alarm.com will be able to get the panel registered and the Installer Code changed for you. This is a common issue when moving into a home where a 2GIG Edge system is already installed.
#AlarmGrid #2GIG #Installer Code #Edge #SecuritySystemDIY
http://alrm.gd/get-monitored
In this video, Dylan from Alarm Grid tells you about the default Installer Code for the 2GIG Edge. The Installer Code is required to program zones and other panel-specific fields such as entry and exit delays. After watching this video you'll know what the default Installer Code is for the 2GIG Edge and how to use it to enter various programming fields.
0:00 - Intro
0:27 - Default Installer Code
1:12 - Installer Toolbox
1:29 - Panel Programming
1:54 - Z-Wave Settings
2:17 - System Tests
2:46 - Camera Settings
2:57 - Onboard Demo Video
3:05 - Restore Defaults
3:26 - Outro
🚨Get Monitored! http://alrm.gd/get-monitored
🔔 Subscribe to Alarm Grid: youtube.com/c/AlarmGrid?sub_confirmation=1
â–¶ 2GIG Edge: Overview: youtube.com/watch?v=JVxxQrsro6w&list=PL5jRrn_Y1aOUSRudfhUuy91yT3soeTBzI
📖 Related FAQ: What Is the Default Installer Code on a 2GIG Edge?: alarmgrid.com/faq/what-is-the-default-installer-code-on-a-2gig-edge
If the Installer Code in your 2GIG Edge has been changed, and you don't know the code, you may be able to get it reset by calling the installing alarm dealer, or contacting your own alarm company to register the panel. If you opt to contact the original installing dealer, expect them to try and sign you up for monitoring. If you don't want to sign up, they should at least be able to set the Installer Code back to default for you so that you can move forward.
If you have no luck with the original company and decide to find your own monitoring solution, there's a good chance any alarm dealer that supports Alarm.com will be able to get the panel registered and the Installer Code changed for you. This is a common issue when moving into a home where a 2GIG Edge system is already installed.
#AlarmGrid #2GIG #Installer Code #Edge #SecuritySystemDIY
http://alrm.gd/get-monitored
