21. How to Interface an LCD to an ARM Microcontroller - Part 8 @PatrickHoodDaniel
21. How to Interface an LCD to an ARM Microcontroller - Part 8  @PatrickHoodDaniel
Uploaded May 2017 | Updated November 2026, 3 days ago
Purchase my new book: Arm Microcontroller Programming and Circuit Building Volume 1
amazon.com/dp-B09PHBT859/dp/B09PHBT859

I recommend using the STM32CubeIDE:
st.com/en/development-tools/stm32cubeide.html

You can still download the CoIDE here:
sourceforge.net/projects/coide



Visit the Newbiehack.com website:
newbiehack.com

Purchase the tools necessary to complete these tutorials:
newbiehack.com/Categories/ARM

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

You can find the Character Displays on Amazon at the following links (all with the HD44780 controller necessary to use with the tutorial):
16x2 LCD: amzn.to/2rbQmvX
20x4 LCD: amzn.to/2t0ocFw

These display are also available at newbiehack.com

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

Equipment that I use to make videos:
Canon EOS Rebel: amzn.to/2rJSeh0
Macro Lens: amzn.to/2qaSKmK
Microphone: amzn.to/2qO2RB4
3D Mouse to rotate/zoom/move the object (Must have for CAD!!!): amzn.to/2ruFnSn
The drafting pencil I use on these videos: amzn.to/2qioYg2
The cheap oscilloscope that I use (because it's cheap and will work all of the projects in these tutorials): amzn.to/2rSHnBa
A better oscilloscope and the one I would recommend: amzn.to/2qizK5M
The brand of multimeter that I use and the one I recommend: amzn.to/2qicUez


Want to have your own Patreon campaign? patreon.com/invite/wpllxz
21. How to Interface an LCD to an ARM Microcontroller - Part 848. Tutorial on how to control a Servo using the ADC Potentiometer on the ARM STM32 MicrocontrollerMach3 Plasma THC Wiring and ConfigurationLaser Controller Trocen AWC708C Setup Part 138. How to Convert the Raw ADC Temperature data into a Degrees- STM32 ARM Microcontroller Part 2#4 ARM STM32 Microcontroller Tutorial - USART  Communication Part 17) ARM Microcontroller Tutorial Changing the Clock Frequency to 48MhzMy DIY Camera Arm (And My Analysis Paralysis)CNC Routing Process (CAD, CAM and CNCl) Variant 2: Part 3 Apply Machining Operations in CAMBAMCAM and CAD/CAE: GatorCAM and Alibre. Two Apps That Care About Their Users!How to use Fusion 360 from the Perspective of an Autodesk Inventor User Part 6Mosque Beautification using the blackFoot CNC Machine from Buildyourcnc.com
BuildYourCNC |

21. How to Interface an LCD to an ARM Microcontroller - Part 8

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER