Uploaded June 2020 | Updated November 2026, 2 hours ago
The design is completed in AutoCAD. Now it's time to apply the machining operations in a CAM program. I'm using CAMBAM for this process.
I upload to Instagram very frequently and add great informative content as well as customer test videos. Make sure to follow me on Instagram at:
instagram.com/buildyourcnc_newbiehack
CAMBAM Software:
buildyourcnc.com/item/CAM-SOFTWARE-cambam
I use this CAM software for my purposes. I personally like the simple user interface and I am able to understand the parameters from years of experience, so I don't need CAM software that explains what the parameters mean.
Mach3 CNC Control Software:
buildyourcnc.com/item/control-SOFTWARE-mach3
This is the software I use with my CNC router.
The greenBullv2 60 degree 4'x8' CNC Router:
buildyourcnc.com/item/cnc-machine-greenbullv2-milling-laser
This is CNC router that I use in my shop and is my favorite as it can also house a laser gantry and it is a great space saver. It takes up the same amount of space as a typical 4'x8' machine, but it is intended to be pushed up against a wall so only one side of the machine needs to be accessed.
All of these machines and software can be purchased at BuildYourCNC.com
buildyourcnc.com
The design is completed in AutoCAD. Now it's time to apply the machining operations in a CAM program. I'm using CAMBAM for this process.
I upload to Instagram very frequently and add great informative content as well as customer test videos. Make sure to follow me on Instagram at:
instagram.com/buildyourcnc_newbiehack
CAMBAM Software:
buildyourcnc.com/item/CAM-SOFTWARE-cambam
I use this CAM software for my purposes. I personally like the simple user interface and I am able to understand the parameters from years of experience, so I don't need CAM software that explains what the parameters mean.
Mach3 CNC Control Software:
buildyourcnc.com/item/control-SOFTWARE-mach3
This is the software I use with my CNC router.
The greenBullv2 60 degree 4'x8' CNC Router:
buildyourcnc.com/item/cnc-machine-greenbullv2-milling-laser
This is CNC router that I use in my shop and is my favorite as it can also house a laser gantry and it is a great space saver. It takes up the same amount of space as a typical 4'x8' machine, but it is intended to be pushed up against a wall so only one side of the machine needs to be accessed.
All of these machines and software can be purchased at BuildYourCNC.com
buildyourcnc.com





![[OLD VERSION - SEE V3] Learn STM32 Microcontroller Programming - Full Course
Link to the new Version 3: https://youtu.be/vKyL43qXPpk
Get the kits to complete these projects here: https://buildyourcnc.com/collections/arm-stm32-microcontroller-kits
Get the companion book here: https://amzn.to/49Bv8QX
If you wish to support me and the efforts in making more content: https://buymeacoffee.com/patrickhooddaniel
Join this channel to get access to perks:
https://www.youtube.com/channel/UCC7ifdmN7ebFo-eXBUZkeiw/join
00:00 Introduction
00:03:35 Introduction to Bare Chip Microcontroller Development
00:06:39 The Prototyping Setup
00:10:22 IDE and Monitoring Software Setup
00:16:03 Getting Familiar with the STM32CubeIDE
00:18:51 Creating a Project in the IDE
00:22:27 Transferring the program to the microcontroller
00:25:20 Monitoring Runtime Data using STMStudio or STMCubeMonitor
00:30:14 Troubleshooting 1: Chip erase using the boot pin
00:31:46 Troubleshooting 2: Chip erase using the reset pic
00:33:02 Troubleshooting 3: Power on AVCC not present
00:37:14 4 Most Important Code Instructions - Changing and testing bits
00:43:15 Project 1: Turning on an LED The Hello World of MCU Projects
01:02:17 Project 2: Receiving Input from a Button
01:18:10 Project 3: Latching an Input
01:32:09 Project 4: Interfacing an LCD Display
02:50:34 Using pointers to construct a string of characters
02:55:51 Project 5: Sending integers to the LCD
03:02:36 Project 6: Send floating point numbers to the LCD
03:07:49 Project 7: Set the location on the LCD
03:17:40 ADC (analog to digital conversion) introduction
03:27:49 Project 8: ADC Conversion (internal temperature sensor)
03:51:39 Project 9: Converting the ADC value to a meaningful number, Temperature
04:00:08 Project 10: Potentiometer as the ADC input
04:07:28 Project 11: Timers and Counters Prescaler (Skip Oscillations)
04:17:34 Project 12: Timers and Counters: ARR (Auto reload register) Top Count Limit
Count Direction Center Aligned Mode (Zig Zag Counting)
04:22:46 Introduction to PWM (Pulse width modulation)
04:30:23 Project 13: PWM (Pulse width modulation)
04:44:51 Project 14: Creating an ADC Header File
04:54:07 Project 15: Control PWM Output with the ADC Attempted to read the PWM with ADC, but
an RC Circuit (to smooth the square wave) is required, so that attempt failed.
05:00:15 Project 16: Control the Dimming of an LED using PWM Controlled by a Potentiometer
Through the ADC
05:01:49 Project 17: Control a Hobby Servo with the PWM Output
05:19:43 Project 18: Control a Hobby Servo with a potentiometer connected to the
ADC which controls the PWM for the Servo
05:25:59 Introduction to Interrupts
05:32:30 Project 19: Using interrupts for ADC Conversion
05:46:23 Project 20: Using interrupts for ADC Conversion 2 Channels
05:56:24 Project 21: Fixing an Artifact on the LCD
06:01:42 Project 22: Push Button Interrupt
06:14:08 Project 23: External Interrupts on two pins
06:18:42 Project 24: Switch output to the STMStudio rather than the LCD
06:26:04 Introduction to the I2C or IIC communication protocol
06:38:13 Project 25: Communicating with the ADXL 345 Accelerometer using the I2C communication protocol Writing a single byte
07:04:19 Project 26: Communicating with the ADXL 345 Accelerometer using the I2C communication protocol Reading a single byte
07:13:38 Introduction to USART and other communication protocols
07:23:41 Project 27: Change the close speed to 48mhz
08:01:01 Project 28: Initialize the USART [OLD VERSION - SEE V3] Learn STM32 Microcontroller Programming - Full Course](https://i.ytimg.com/vi/n3FcSppat68/mqdefault.jpg)




