Uploaded March 2016 | Updated November 2026, 3 days ago
I recently bought a 2012 Ford Fusion Hybrid and am having an intermittent problem with its brake system.
The problem is that, when I am applying steady brake pressure to bring the car to a stop, once in a while when the speed gets down around 5 mph, the car will stop slowing down and I will have to step on the brake pedal a lot harder than I was before in order to make the car come to a stop.
Sometimes, when this happens, the car's engine will start up for a few seconds when I have to step harder on the brake pedal as the car comes to a stop. This behavior doesn't make much sense to me.
The brake problem is pretty scary when there is a car, or especially a pedestrian, in front of me when I need to bring the car to a stop.
The problem seems to go in streaks; the car will brake totally smoothly and normally for a while with no problem, then once the problem happens, it is likely to happen again - usually several times - on the same drive. I was driving to work this morning when the problem happened a few times, so I pulled over and set up the camera to catch the dashboard indicators in case the problem kept happening, which it did. You can see when the engine starts during braking as the "EV" indicator disappears from the PWR graph. (Unfortunately, it is hard to hear the engine start on the audio recording, but it is plainly audible when actually in the car.)
The brake problem happens five times in this unedited drive video, at the following times:
1st event: 3m 06s (engine starts)
2nd event: 5m 32s (engine does not start)
3rd event: 6m 10s (engine does not start)
4th event: 7m 12s (engine starts)
5th event: 8m 10s (engine starts)
I recently bought a 2012 Ford Fusion Hybrid and am having an intermittent problem with its brake system.
The problem is that, when I am applying steady brake pressure to bring the car to a stop, once in a while when the speed gets down around 5 mph, the car will stop slowing down and I will have to step on the brake pedal a lot harder than I was before in order to make the car come to a stop.
Sometimes, when this happens, the car's engine will start up for a few seconds when I have to step harder on the brake pedal as the car comes to a stop. This behavior doesn't make much sense to me.
The brake problem is pretty scary when there is a car, or especially a pedestrian, in front of me when I need to bring the car to a stop.
The problem seems to go in streaks; the car will brake totally smoothly and normally for a while with no problem, then once the problem happens, it is likely to happen again - usually several times - on the same drive. I was driving to work this morning when the problem happened a few times, so I pulled over and set up the camera to catch the dashboard indicators in case the problem kept happening, which it did. You can see when the engine starts during braking as the "EV" indicator disappears from the PWR graph. (Unfortunately, it is hard to hear the engine start on the audio recording, but it is plainly audible when actually in the car.)
The brake problem happens five times in this unedited drive video, at the following times:
1st event: 3m 06s (engine starts)
2nd event: 5m 32s (engine does not start)
3rd event: 6m 10s (engine does not start)
4th event: 7m 12s (engine starts)
5th event: 8m 10s (engine starts)


![He May Be a Communist
In this set of clips, Americans are shown how to spot Communists. For example: If a person consistently reads and advocates the views expressed in a Communist publication, he may be a Communist. If a person defends the activities of Communist nations while consistently attacking the domestic and foreign policies of the United States, she may be a Communist.[...] If a person does all these things, over a period of time, he MUST be a Communist! The video also goes on to demonstrate the evils of Communists stealing ones daughter away to work on a collective farm. He May Be a Communist](https://i.ytimg.com/vi/AWeZ5SKXvj8/mqdefault.jpg)


![Globalstar GSP-1600 Engineering Mode - Handoffs & SNR
This video is of a Globalstar GSP-1600 in satellite mode. I place a call to a long recording then put the phone into engineering / debug / field test mode and show handoffs between spot beams and satellites as they traverse the sky above my location.
The GSP-1600 has a three-fingered CDMA rake receiver, meaning that it can receive and utilize up to three signals simultaneously. Each row on this screen shows the status of a single rake finger. The fields, from left to right, are [finger status] [satellite ID] [spot beam ID] [signal-to-(noise+interference) ratio].
I am not sure what each of the status codes means, but I believe that A stands for active. Each Globalstar satellite transmits 16 separate signals (spot beams), each aimed in a different direction toward the earth. The spot beam(s) visible in a given location from a given satellite vary as the satellite moves across the horizon, and calls hand off between spot beams in much the same manner as they hand off between satellites.
The spot beam pattern is rather interesting; details can be found on page 6 of this document: http://tinyurl.com/bbyx7yk Globalstar GSP-1600 Engineering Mode - Handoffs & SNR](https://i.ytimg.com/vi/BRufSQGJYk4/mqdefault.jpg)




