Uploaded November 2023 | Updated September 2026, 3 weeks ago
Parts used listed in the description below!
Watch a full tutorial as a 2011 Toyota Camry will have a new mono CT Sounds amplifier installed. This new amplifier will be paired to an aftermarket radio that was installed previously. We will be powering two 12" Pioneer subwoofers and amp will be installed under the passenger front seat.
NOTE: Our Camry had an aftermarket radio preinstalled which we will be hooking our new amplifier up to. If you are keeping your factory radio, you will need a line out converter and access speaker wire from inside the trunk at the rear speaker deck for both the JBL or non JBL models.
Left rear speaker (+): Black
Left rear speaker (-): Yellow
Right rear speaker (+): Red
Right rear speaker (-): White
Remote turn on wire can be found behind the radio, on the main radio power harness. It is a solid Gray wire.
This video applies to Toyota Camry models for years 2007, 2008, 2009, 2010, and 2011. This video also includes complete amplifier wiring, installation, and testing.
Click here for a full 5 channel amp and sub install video:
youtu.be/80BmIhvdmL4
Click here for the radio install video:
youtu.be/eqx2ISfrTU0
Click here for the front speaker install video:
youtu.be/6__3s8MtABc
Click here for the rear speaker install video:
youtu.be/L6yfm7GQwbA
Click here for the backup camera video:
youtu.be/YyrMwqFs1_M
If you have any questions, leave a comment below! Be sure to like and subscribe!
Amplifier Install Parts (Amazon Associate Paid Links):
*If adding an amp to the OEM radio (non-JBL), use this T-harness kit with LOC: provobeast.com/product-page/1987-2020-toyota-subaru-scion-add-an-amplifier-t-harness
*CT Sounds CT700.1D Amplifier: amzn.to/3zbEgH0
--Other recommended amplifiers: amzn.to/4n40q64
*Pioneer Subwoofers w/ box (discontinued).
--Recommended subwoofer package: amzn.to/49hY9OT
*4 gauge Amp Wiring kit: amzn.to/31f0r2U
--Recommended complete subwoofer package: amzn.to/3kVtv62
*Clean wire ruler: provobeast.com/product-page/clean-wiring-installer-ruler
*Other helpful amplifier install accessories: provobeast.com/other-cool-stuff
*Disclosure: As an Amazon Associate I earn from qualifying purchases*
Parts used listed in the description below!
Watch a full tutorial as a 2011 Toyota Camry will have a new mono CT Sounds amplifier installed. This new amplifier will be paired to an aftermarket radio that was installed previously. We will be powering two 12" Pioneer subwoofers and amp will be installed under the passenger front seat.
NOTE: Our Camry had an aftermarket radio preinstalled which we will be hooking our new amplifier up to. If you are keeping your factory radio, you will need a line out converter and access speaker wire from inside the trunk at the rear speaker deck for both the JBL or non JBL models.
Left rear speaker (+): Black
Left rear speaker (-): Yellow
Right rear speaker (+): Red
Right rear speaker (-): White
Remote turn on wire can be found behind the radio, on the main radio power harness. It is a solid Gray wire.
This video applies to Toyota Camry models for years 2007, 2008, 2009, 2010, and 2011. This video also includes complete amplifier wiring, installation, and testing.
Click here for a full 5 channel amp and sub install video:
youtu.be/80BmIhvdmL4
Click here for the radio install video:
youtu.be/eqx2ISfrTU0
Click here for the front speaker install video:
youtu.be/6__3s8MtABc
Click here for the rear speaker install video:
youtu.be/L6yfm7GQwbA
Click here for the backup camera video:
youtu.be/YyrMwqFs1_M
If you have any questions, leave a comment below! Be sure to like and subscribe!
Amplifier Install Parts (Amazon Associate Paid Links):
*If adding an amp to the OEM radio (non-JBL), use this T-harness kit with LOC: provobeast.com/product-page/1987-2020-toyota-subaru-scion-add-an-amplifier-t-harness
*CT Sounds CT700.1D Amplifier: amzn.to/3zbEgH0
--Other recommended amplifiers: amzn.to/4n40q64
*Pioneer Subwoofers w/ box (discontinued).
--Recommended subwoofer package: amzn.to/49hY9OT
*4 gauge Amp Wiring kit: amzn.to/31f0r2U
--Recommended complete subwoofer package: amzn.to/3kVtv62
*Clean wire ruler: provobeast.com/product-page/clean-wiring-installer-ruler
*Other helpful amplifier install accessories: provobeast.com/other-cool-stuff
*Disclosure: As an Amazon Associate I earn from qualifying purchases*
