Uploaded September 2015 | Updated November 2026, 4 hours ago
Click here to see this product & more on Fibreglast.com: goo.gl/WKV029
Fill Cavities for Flotation and Reinforcement
This 2 lb. density foam comes as a two-part kit, both parts equally mixed. It is a closed-cell system, meaning individual cells of foam trap in air and keep liquids out. As a result, it is most frequently used for flotation applications, delivering 60 pounds of float per cubic foot. It can be used to fill cavities for reinforcement and insulation, and can be shaped or carved , once cured, for use as a plug in mold-making or sculpting.
2 lb. foam expands approximately 30 times its liquid volume before cure, and will fill any shape.
Once two parts are mixed, it will begin to react and expand within 45 seconds, and will continue for several minutes.
Closed-cell structure does not react with oil or gasoline, and will not absorb water.
Laminate directly onto foam using epoxy or polyester resin; it can also be used with urethane pigments (#141, #143), latex paint, and parting wax (#1016) when used in-mold.
Before filling cavities for insulation, flotation or reinforcement, determine how much foam you'll need.
First, calculate the volume of your container in cubic feet. For example 1 ft. high x 1 ft. long x 2 ft. deep = 2 total cubic feet.
Second, for 2 lb. foam, multiply that total by 2.5. In this case, 2 cubic ft. x 2.5 = 5 lb. of required foam.
This foam is designed to meet USCG Title 33, Chapter 1, Part 183 when mixed properly.
Click here to see this product & more on Fibreglast.com: goo.gl/WKV029
Fill Cavities for Flotation and Reinforcement
This 2 lb. density foam comes as a two-part kit, both parts equally mixed. It is a closed-cell system, meaning individual cells of foam trap in air and keep liquids out. As a result, it is most frequently used for flotation applications, delivering 60 pounds of float per cubic foot. It can be used to fill cavities for reinforcement and insulation, and can be shaped or carved , once cured, for use as a plug in mold-making or sculpting.
2 lb. foam expands approximately 30 times its liquid volume before cure, and will fill any shape.
Once two parts are mixed, it will begin to react and expand within 45 seconds, and will continue for several minutes.
Closed-cell structure does not react with oil or gasoline, and will not absorb water.
Laminate directly onto foam using epoxy or polyester resin; it can also be used with urethane pigments (#141, #143), latex paint, and parting wax (#1016) when used in-mold.
Before filling cavities for insulation, flotation or reinforcement, determine how much foam you'll need.
First, calculate the volume of your container in cubic feet. For example 1 ft. high x 1 ft. long x 2 ft. deep = 2 total cubic feet.
Second, for 2 lb. foam, multiply that total by 2.5. In this case, 2 cubic ft. x 2.5 = 5 lb. of required foam.
This foam is designed to meet USCG Title 33, Chapter 1, Part 183 when mixed properly.










