Woven Fiberglass Tapes @fibreglast
Woven Fiberglass Tapes  @fibreglast
Uploaded March 2014 | Updated November 2026, 4 hours ago
Click here to see this product & more on Fibreglast.com:
bit.ly/1Mx1N9f

7.5--10 oz/sq yd, Various Widths, 0.015" Thick, 18 x 17 Plain Weave

Woven Fiberglass Tape is ideal for selective reinforcement of fiberglass laminates, sleeve or pipe winding, seams, and molding.

These tapes are referred to as tapes only for their width and appearance—they are not adhesive backed. Their finished edges offer easier handling and a clean, finished appearance, and keep the tape from unraveling.

Tapes are matched to our #243 and #245 fabrics (7.5--10 ounce fabrics). Their plain weave construction builds in uniform strength in both horizontal and vertical directions.

Tapes are meant to be used with a resin, they saturate easily, and are compatible with epoxy, polyester, and vinyl ester.

With the Fibre Glast First Quality commitment, you can expect the same finish, sizing, and handling characteristics every time you order this tape.

Typical full roll length is 50 yards.
Woven Fiberglass TapesMold ReleasesIntroducing Sunrez UV Cured Prepregs and ResinSystem 1000 Epoxy Resin#113 Machine Glaze543 9 oz Style 7781 Fiberglass FabricStreet Bandito FE32 Mix and Pour FoamPorsche 997 BuildSandwich Core Materials: Nomex Honeycomb, End-Grain Balsa & Foam251 Continuous Strand MatSaertex 989 g/m2 (29 oz/yd2) Stitched Biaxial (+/-45)FE 32 Fabrication - Part Two
Fibre Glast |

Woven Fiberglass Tapes

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER