Uploaded June 2019 | Updated November 2026, 3 days ago
➤Don't forget to subscribe ! bit.ly/SubscribeJMSpeedshop
➤Website: jmspeedshop.com
➤instagram: instagram.com/johanmuter
Part 2 of the engine assembly
got the intake installed and it is very tight
all new oring gasket in between the plate and the intake
got the injectors installed on the fuel rail. new top rings and pintle caps.
next is the new oil pan gasket and the new oil level sensor in the sump. also new oil filter installed.
also measured the multi belt that needs to be shortened i have a 8PK2440 in order.
got a new steeringpump filter in the pump . so also ready for the new oil when it is in the car
so next is the transmission that needs some service and new filter and seals. also need some checks on the conductor plate
if there are any questions just ask
JMSpeedshop.com
Music:
MAXWELL: LOVE
MAXWELL: READY
Andrew applepie: I'm so
andrewapplepie.com
youtube.com/andrewapplepie
andrewapplepie.bandcamp.com
➤Don't forget to subscribe ! bit.ly/SubscribeJMSpeedshop
➤Website: jmspeedshop.com
➤instagram: instagram.com/johanmuter
Part 2 of the engine assembly
got the intake installed and it is very tight
all new oring gasket in between the plate and the intake
got the injectors installed on the fuel rail. new top rings and pintle caps.
next is the new oil pan gasket and the new oil level sensor in the sump. also new oil filter installed.
also measured the multi belt that needs to be shortened i have a 8PK2440 in order.
got a new steeringpump filter in the pump . so also ready for the new oil when it is in the car
so next is the transmission that needs some service and new filter and seals. also need some checks on the conductor plate
if there are any questions just ask
JMSpeedshop.com
Music:
MAXWELL: LOVE
MAXWELL: READY
Andrew applepie: I'm so
andrewapplepie.com
youtube.com/andrewapplepie
andrewapplepie.bandcamp.com








![[ Mercedes 190 V12 project ] all cooler are mounted and new intakes !! JMSpeedshop !
➤Dont forget to subscribe ! http://bit.ly/SubscribeJMSpeedshop
➤Website: http://jmspeedshop.com
➤instagram: https://www.instagram.com/johanmuter/
radiator was already fitted. but i got also the oil cooler and the transmission cooler mounted in place
the facelift bumpers are in place. to test fit.
got the ventillation openings created. in the bumpers
and with minor mods to the bumper it will fit perfectly around the bigger cooler pack.
als got a plan for the are intakes
have look [ Mercedes 190 V12 project ] all cooler are mounted and new intakes !! JMSpeedshop !](https://i.ytimg.com/vi/Qgp4ArjRsX4/mqdefault.jpg)

