Uploaded December 2021 | Updated November 2026, 3 days ago
➤Don't forget to subscribe ! bit.ly/SubscribeJMSpeedshop
➤Patreon: patreon.com/jmspeedshop
➤Website: jmspeedshop.com
➤instagram: instagram.com/johanmuter
M113 Oil cooler adapter custom made for V8 turbo Project
The oil cooler on my M113 5.0 is standard a bolton piece like on all other NA m113 and M112 engine's. For my turbo application i want more control. and a stable temp. So i could do 2 things. Buy all the parts for the M113K model. This has from factory a thermostate housing and hose connections to a external oil cooler. Or build my own adapter plate.
I did build this myself for a few reson's. It is cheaper. some Oem parts not availible. And i want AN connections. And the adapaters on the market for the M113K thermostat housing cost more then my adapter complete.
So i used 10mm aluminium plate and made a copy with my wood router table. from the oem oil cooler dimensions. welded on 2 AN10 connections. And done. I polished the 2 surfaces for good closing with the rubber gaskets on the filter housing .
Have a look on for more of this build by clicking this link
or the full playlist on youtube
➤Don't forget to subscribe ! bit.ly/SubscribeJMSpeedshop
➤Patreon: patreon.com/jmspeedshop
➤Website: jmspeedshop.com
➤instagram: instagram.com/johanmuter
M113 Oil cooler adapter custom made for V8 turbo Project
The oil cooler on my M113 5.0 is standard a bolton piece like on all other NA m113 and M112 engine's. For my turbo application i want more control. and a stable temp. So i could do 2 things. Buy all the parts for the M113K model. This has from factory a thermostate housing and hose connections to a external oil cooler. Or build my own adapter plate.
I did build this myself for a few reson's. It is cheaper. some Oem parts not availible. And i want AN connections. And the adapaters on the market for the M113K thermostat housing cost more then my adapter complete.
So i used 10mm aluminium plate and made a copy with my wood router table. from the oem oil cooler dimensions. welded on 2 AN10 connections. And done. I polished the 2 surfaces for good closing with the rubber gaskets on the filter housing .
Have a look on for more of this build by clicking this link
or the full playlist on youtube






![[ Mercedes 190 V12 project ] all cooler are mounted and new intakes !! JMSpeedshop !
➤Dont forget to subscribe ! http://bit.ly/SubscribeJMSpeedshop
➤Website: http://jmspeedshop.com
➤instagram: https://www.instagram.com/johanmuter/
radiator was already fitted. but i got also the oil cooler and the transmission cooler mounted in place
the facelift bumpers are in place. to test fit.
got the ventillation openings created. in the bumpers
and with minor mods to the bumper it will fit perfectly around the bigger cooler pack.
als got a plan for the are intakes
have look [ Mercedes 190 V12 project ] all cooler are mounted and new intakes !! JMSpeedshop !](https://i.ytimg.com/vi/Qgp4ArjRsX4/mqdefault.jpg)



