Uploaded September 2025 | Updated September 2026, 2 weeks ago
This is my biggest antenna build yet! A full 160m / 80m fan dipole — from scratch, all the way through to WSPR testing.
In this video you’ll see:
✅ Preparing and painting the poles
✅ Building the dipole centre and elements
✅ Coax, balun and choke setup
✅ Raising the mast (the epic lift :)
✅ Tuning and first SWR tests
BUILD VIDEO: youtu.be/PV5GdAZ1nfo
It’s rare to see a compact 160m solution paired with a full-sized 80m dipole, so I wanted to document the entire process in detail.
If you’re into low-band antennas, DIY builds, or just enjoy big projects coming to life, you’ll love this one.
📡 Subscribe for more antenna builds, ham radio experiments, and contest action.
💬 Drop a comment if you’ve ever tried 160m — I’d love to hear what worked (or didn’t!) for you.
0:00 – Teaser – The big lift (hook)
0:12 – Preparing the Poles – Painting, fitting, grinding, ramming sections together
6:31 – Planning the Dipole – Measurements, wire lengths, horseshoe layout
9:38 – Cutting & Prepping Wire – Kevlar cord, foldbacks, dipole centre
15:33 – Coax & Balun Setup – Patch leads, choke discussion, memories of Barry
21:00 – Coax Assembly – Measuring, cutting, connectors, testing continuity
31:20 – Adding 80m Legs – Fan dipole build begins
34:00 – Matching & Impedance Talk – 75Ω quarter-wave match explanation
36:05 – Mounting & Bolting Mast – Drilling, washers, test-fit
42:50 – Securing Mast – Bolts, levelling, wide shot
48:40 – Next Day Setup – Tensioning, knots, wind test
51:00 – 160m & 80m Alignment – Galvanised fixings, lifting elements
56:13 – 80m Wire Install – Cleats, pilot holes, tensioning
1:00:00 – Coax & Final Tension – Routing, connectors, self-amalg tape
1:03:30 – Testing & SWR – Adjustments, bandwidth discussion
1:05:30 – Wrap Up – Sign-off and next project
1:06:27 – Easter Egg – Intentional error / correction
This is my biggest antenna build yet! A full 160m / 80m fan dipole — from scratch, all the way through to WSPR testing.
In this video you’ll see:
✅ Preparing and painting the poles
✅ Building the dipole centre and elements
✅ Coax, balun and choke setup
✅ Raising the mast (the epic lift :)
✅ Tuning and first SWR tests
BUILD VIDEO: youtu.be/PV5GdAZ1nfo
It’s rare to see a compact 160m solution paired with a full-sized 80m dipole, so I wanted to document the entire process in detail.
If you’re into low-band antennas, DIY builds, or just enjoy big projects coming to life, you’ll love this one.
📡 Subscribe for more antenna builds, ham radio experiments, and contest action.
💬 Drop a comment if you’ve ever tried 160m — I’d love to hear what worked (or didn’t!) for you.
0:00 – Teaser – The big lift (hook)
0:12 – Preparing the Poles – Painting, fitting, grinding, ramming sections together
6:31 – Planning the Dipole – Measurements, wire lengths, horseshoe layout
9:38 – Cutting & Prepping Wire – Kevlar cord, foldbacks, dipole centre
15:33 – Coax & Balun Setup – Patch leads, choke discussion, memories of Barry
21:00 – Coax Assembly – Measuring, cutting, connectors, testing continuity
31:20 – Adding 80m Legs – Fan dipole build begins
34:00 – Matching & Impedance Talk – 75Ω quarter-wave match explanation
36:05 – Mounting & Bolting Mast – Drilling, washers, test-fit
42:50 – Securing Mast – Bolts, levelling, wide shot
48:40 – Next Day Setup – Tensioning, knots, wind test
51:00 – 160m & 80m Alignment – Galvanised fixings, lifting elements
56:13 – 80m Wire Install – Cleats, pilot holes, tensioning
1:00:00 – Coax & Final Tension – Routing, connectors, self-amalg tape
1:03:30 – Testing & SWR – Adjustments, bandwidth discussion
1:05:30 – Wrap Up – Sign-off and next project
1:06:27 – Easter Egg – Intentional error / correction
