100V, Bidirectional Multiphase Synchronous Buck or Boost Controller @LinearTechnology
100V, Bidirectional Multiphase Synchronous Buck or Boost Controller  @LinearTechnology
Uploaded April 2017 | Updated September 2026, 2 weeks ago
The LTC3871 is a bidirectional synchronous buck or boost controller to step-down or step-up the voltage between the 12V and 48V batteries in dual battery automotive applications. The LTC3871 is a 100V/30V bidirectional two-phase synchronous buck or boost controller. It operates in buck mode or in boost mode. Either mode is configured on demand with an applied control signal. Up to 12 phases can be paralleled and clocked out-of-phase for high current applications up to 3kW. Four control loops, two for current and two for voltage, enable control of voltage and current on either the 48V or 12V outputs.
100V, Bidirectional Multiphase Synchronous Buck or Boost ControllerHigh-Power Boost/SEPIC/Inverting DC/DC Converters with Fault Protection60V High-Current Step-Down LED Driver ControllerThe Simple Way to Match to a High-Speed ADC Input1.5A LDO+ Regulator Monitors Current & TemperatureLTpowerCAD: Loss Estimate & Break Down60V, 4A Monolithic Buck Regulator w/ Rail-to-Rail Prog Output and Integrated Current MonitoringVersatile Comparators Enable Fast Signal Detection, Level Translation and Clock RecoveryA Very Low Power, High Performance I/Q Modulator140V CMOS Op Amp with Rail-to-Rail Output & pA InputsRugged USB Isolation that Simply Works60V 8-Switch Matrix LED Dimmer
LinearTechnology |

100V, Bidirectional Multiphase Synchronous Buck or Boost Controller

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER