Uploaded April 2016 | Updated November 2026, 2 days ago
4" motor I made with too much LOX in tank after the unburned wax grain extruded out the nozzle, the motor ran out of fuel but LOX kept flowing burning up the black ABS liner (not PVC), which burned also quite nice. In a perfect world, the self-pressurized oxidizer and fuel run out at exactly the same time, in less than perfect burning, you hope to run out of oxidizer (LOX) first. At 0:54 seconds into the video, you can see the paraffin fuel being extruded out of the nozzle.
The ambient air temperature was near 100 F, not good for paraffin motors.
4" motor I made with too much LOX in tank after the unburned wax grain extruded out the nozzle, the motor ran out of fuel but LOX kept flowing burning up the black ABS liner (not PVC), which burned also quite nice. In a perfect world, the self-pressurized oxidizer and fuel run out at exactly the same time, in less than perfect burning, you hope to run out of oxidizer (LOX) first. At 0:54 seconds into the video, you can see the paraffin fuel being extruded out of the nozzle.
The ambient air temperature was near 100 F, not good for paraffin motors.










