Uploaded January 2014 | Updated November 2026, 3 days ago
This was the second of three planned 89mm motor tests of our new 'Double D' sugar propellant grains. Last month a 2 grain motor was successfully tested. This test used a newly fabricated bulkhead allowing easy installation of the igniter and a total of 4 grains in a 'blast tube' configuration...the motor case is sized for 6 grains.
The grains were 'painted' with polyester resin containing quartz microballoons to inhibit the surfaces not intended for ignition. This appears to have failed since the pressure exceeding the expected pressure. As with the 2-grain motor, the liner in the nozzle end of the motor was found to be completely burned away leading to the burn through of the motor case.
A different, more heat resistant liner will be used on next month's test of the 6 grain motor. Those 6 grains will also have an addtional fiberglass layer on the inhibited surfaces to control burning and reduce motor pressure.
This was the second of three planned 89mm motor tests of our new 'Double D' sugar propellant grains. Last month a 2 grain motor was successfully tested. This test used a newly fabricated bulkhead allowing easy installation of the igniter and a total of 4 grains in a 'blast tube' configuration...the motor case is sized for 6 grains.
The grains were 'painted' with polyester resin containing quartz microballoons to inhibit the surfaces not intended for ignition. This appears to have failed since the pressure exceeding the expected pressure. As with the 2-grain motor, the liner in the nozzle end of the motor was found to be completely burned away leading to the burn through of the motor case.
A different, more heat resistant liner will be used on next month's test of the 6 grain motor. Those 6 grains will also have an addtional fiberglass layer on the inhibited surfaces to control burning and reduce motor pressure.










