Uploaded February 2021 | Updated September 2026, 2 weeks ago
This video is mostly me soldering very thin wires to PCB traces and via's. Enjoy!
The documentation on this chip and the boot logs: mobile-computer-repairs.co.uk/blog/topic/29/routers/Arris-TG2492
The Gerber files for the SD Card PCB: gitlab.com/timkoers/sd_card_pcb
Thanks for watching my video!
Want to contribute to my channel?
You can buy various electronics components using these links:
FeelElec FY6900 (20MHz to 60MHz): https://s.click.aliexpress.com/e/_d8uetg0
ESP-01S: https://s.click.aliexpress.com/e/_BfirlPh2
NodeMCU V3: https://s.click.aliexpress.com/e/_dXIVjLI
RobotDyn AC dimmer: https://s.click.aliexpress.com/e/_d8YAlGg
220V AC to 3.3V DC converter HLK-PM03: https://s.click.aliexpress.com/e/_dUHCfJW
VS1838B IR receiver: https://s.click.aliexpress.com/e/_dWGz9eG
Prototyping boards (various sizes): https://s.click.aliexpress.com/e/_d8ZxGAs
Dupont jumper cables (all variants): https://s.click.aliexpress.com/e/_dVyzHN2
(Tip!) Blitzwolf micro usb (+ USB C adapter): https://s.click.aliexpress.com/e/_Ap4HWV
(Tip!) 115 in 1 scredriver set: https://s.click.aliexpress.com/e/_d8RBPy8
Please checkout my Patreon page! patreon.com/timselectronicslab
You can also find me on Instagram:
instagram.com/timselectronicslab
If you still need to create a Banggood account, please use my referral link:
banggood.app.link/AYJB8cq4X8
Please use this link if you are planning to purchase something:
banggood.com/index.php?zf=6303154
This video is mostly me soldering very thin wires to PCB traces and via's. Enjoy!
The documentation on this chip and the boot logs: mobile-computer-repairs.co.uk/blog/topic/29/routers/Arris-TG2492
The Gerber files for the SD Card PCB: gitlab.com/timkoers/sd_card_pcb
Thanks for watching my video!
Want to contribute to my channel?
You can buy various electronics components using these links:
FeelElec FY6900 (20MHz to 60MHz): https://s.click.aliexpress.com/e/_d8uetg0
ESP-01S: https://s.click.aliexpress.com/e/_BfirlPh2
NodeMCU V3: https://s.click.aliexpress.com/e/_dXIVjLI
RobotDyn AC dimmer: https://s.click.aliexpress.com/e/_d8YAlGg
220V AC to 3.3V DC converter HLK-PM03: https://s.click.aliexpress.com/e/_dUHCfJW
VS1838B IR receiver: https://s.click.aliexpress.com/e/_dWGz9eG
Prototyping boards (various sizes): https://s.click.aliexpress.com/e/_d8ZxGAs
Dupont jumper cables (all variants): https://s.click.aliexpress.com/e/_dVyzHN2
(Tip!) Blitzwolf micro usb (+ USB C adapter): https://s.click.aliexpress.com/e/_Ap4HWV
(Tip!) 115 in 1 scredriver set: https://s.click.aliexpress.com/e/_d8RBPy8
Please checkout my Patreon page! patreon.com/timselectronicslab
You can also find me on Instagram:
instagram.com/timselectronicslab
If you still need to create a Banggood account, please use my referral link:
banggood.app.link/AYJB8cq4X8
Please use this link if you are planning to purchase something:
banggood.com/index.php?zf=6303154
![#27 [GUIDE] OnePlus 6T Step-by-Step Rooting](https://i.ytimg.com/vi/B1tX4htgZLI/mqdefault.jpg "#27 [GUIDE] OnePlus 6T Step-by-Step Rooting
Thanks for watching my video!
For a detailed guide of the unlocking process (for branded and unbranded phones), check out XDA: https://www.xda-developers.com/oneplus-6t-unlock-bootloader-root/
### Important with updating! ###
When an OTA update arrives, the default OnePlus rom will detect that your phone is rooted. It will download the full update instead of an incremental package. You can install the update, BUT DO NOT REBOOT when it is finished.
When it is finished goto Magisk and in the main screen press install, then press install again and select Install to Inactive Slot (After OTA). When that is done, you may reboot and Magisk should still be there.
Download the twrp-3.2.3-x_blu_spark_v9.86_op6.img and twrp-3.2.3-x_blu_spark_v9.86_op6.zip TWRP sideload image from XDA: https://forum.xda-developers.com/devdb/project/?id=27466#downloads
Download Magisk from XDA: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
#### Commands ####
With your phone in fastboot mode, enter
$: fastboot oem unlock
This will wipe the phone!
Restart it into fastboot mode after that is done.
Extract the downloaded files in a folder and open a command prompt in it.
$: fastboot boot twrp-3.2.3-x_blu_spark_v9.86_op6.img
Which will boot into the twrp recovery. Once booted, select Advanced, ADB Sideload and allow the adb sideload.
$: adb sideload twrp-3.2.3-x_blu_spark_v9.86_op6.zip
Once that is done, go back to the main menu of TWRP and reboot into the recovery, by pressing reboot into recovery in the TWRP menu.
When TWRP is booted up, goto Advanced, ADB Sideload and allow the adb sideload
$: adb sideload Magisk-v17.3.zip
Wait for this to finish and youve unlocked and rooted your phone.
Want to contribute to my channel? Please checkout my Patreon page! https://www.patreon.com/timselectronicslab
If you still need to create a Banggood account, please use my referral link: https://www.banggood.com/index.php?zf=6303154")
![#77-2 [GUIDE] Siglent SDS1204X-E bodeplot 📈 using FY6900 (Chapterized 🧾)](https://i.ytimg.com/vi/DqjhTfOy9NY/mqdefault.jpg "#77-2 [GUIDE] Siglent SDS1204X-E bodeplot 📈 using FY6900 (Chapterized 🧾)
Have you ever wanted to use the bode plot functionality of your Siglent oscilloscope, but did not have a Siglent AWG on hand? Watch this video to see how you can attach the FY6900 (and FY6800, FY6600) AWG to your Siglent SDS1xxx series scope.
You can find the source code here:
https://github.com/timkoers/espBode
You can buy the AWG here:
FeelElec FY6900 (20MHz to 60MHz): https://s.click.aliexpress.com/e/_d8uetg0
FeelElec FY6900 60MHz: https://www.banggood.com/FY6900-Dual-Channel-DDS-Function-Arbitrary-Waveform-Signal-Generator-Pulse-Signal-Source-Frequency-Counter-Fully-Numerical-Control-20MHZ30MHZ50MHZ60MHZ-p-1495502.html?zf=6303154
The ESP-01S can be found here:
https://s.click.aliexpress.com/e/_BfirlPh2
Chapters:
0:00 Intro
0:30 Discussing the DUT
2:00 Configuring the channel settings
2:45 Connecting the DUT
4:25 Frequency range setup
5:03 Starting the bodeplot
5:40 Setting up the FY6900
6:47 Bodeplot finished
7:54 Restarting the bodeplot
8:45 Frequency analysis using FFT
9:10 Configuring the FFT settings
11:05 Configuring the sweep settings
12:30 Starting the sweep
13:35 Setting the sweep to a wider range
13:45 Starting the sweep
14:00 Stabilizing the results
15:05 Another frequency sweep
18:00 Difference between bodeplot and FFT frequency analysis
18:30 Comparing bodeplot with FFT results for various devices
26:30 Outro
Thanks for watching my video!
Want to contribute to my channel?
You can buy various electronics components using these links:
FeelElec FY6900 (20MHz to 60MHz): https://s.click.aliexpress.com/e/_d8uetg0
ESP-01S: https://s.click.aliexpress.com/e/_BfirlPh2
NodeMCU V3: https://s.click.aliexpress.com/e/_dXIVjLI
RobotDyn AC dimmer: https://s.click.aliexpress.com/e/_d8YAlGg
220V AC to 3.3V DC converter HLK-PM03: https://s.click.aliexpress.com/e/_dUHCfJW
VS1838B IR receiver: https://s.click.aliexpress.com/e/_dWGz9eG
Prototyping boards (various sizes): https://s.click.aliexpress.com/e/_d8ZxGAs
Dupont jumper cables (all variants): https://s.click.aliexpress.com/e/_dVyzHN2
(Tip!) Blitzwolf micro usb (+ USB C adapter): https://s.click.aliexpress.com/e/_d65Y0dQ
Please checkout my Patreon page! https://www.patreon.com/timselectronicslab
You can also find me on Instagram:
https://instagram.com/timselectronicslab
If you still need to create a Banggood account, please use my referral link:
https://banggood.app.link/AYJB8cq4X8
Please use this link if you are planning to purchase something:
https://www.banggood.com/index.php?zf=6303154")
