Garage Workshop Space Saver - Soft Open And Locking - P3 Woodshop Junkies 2021-07-24 | A Mini-Workshop that won't take up too much space where space is limited. That is my vision. Though I am still far away from the finished product I am hoping that the design can be adapted and used in many areas where space is limited.In this video, I finish up segment 1 of my 3 segment design by adding a soft open and table locking feature. To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesCheck out Part 1 - The Mechanism:youtu.be/kIeuntHqOFoPart 2 - The Cabinetyoutu.be/C1Tg1CRxr4MSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Ultimate Tool Storage For Small Garage Workshops - How To Woodshop Junkies 2023-08-06 | Getting my workshop organized! I designed and built this tool storage unit to maximize tool storage within the allocated space. Making the most of a small workshop means being organized. Everything in its place with this DIY tool storage unit.To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkies?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfwoodshopjunkies_YX51EX1QXCSSJDM1G09TUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might enjoy:Restoring a Wadkin Bursgreen AGS 10: youtube.com/playlist?list=PLLL4TPJc4T3gU8y83KrKz4qksB7sTNO9DRestoring woodworking history:youtube.com/playlist?list=PLLL4TPJc4T3jK2PO7-9vNjQP1Ubul_GPbSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
I Was Given A Fence! - Can I Get It Looking And Working Like New? Woodshop Junkies 2023-07-02 | Restoring an original WADKIN AGS10 fence.Thanks to a generous viewer I got my hands on an original fence for my WADKIN BURSGREEN AGS 10 Table saw.With this fence, I am another step closer to having the perfect beast of a saw in my small single-garage hobby workshop.To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might enjoy:Restoring a Wadkin Bursgreen AGS 10: youtube.com/playlist?list=PLLL4TPJc4T3gU8y83KrKz4qksB7sTNO9DRestoring woodworking history:youtube.com/playlist?list=PLLL4TPJc4T3jK2PO7-9vNjQP1Ubul_GPbSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Cleaning Up A Rusted Drill Chuck #vintagemachinery #restoration #shorts Woodshop Junkies 2023-06-19 | Restoring vintage woodworking machines can seem daunting. I prefer stripping a machine completely before starting so I can asses each component individually.
Quick And Easy Partitioning. #shorts #Hotwheels Woodshop Junkies 2023-06-13 | Making a simple storage, organizer, and display case for my son's Hot Wheels.
Awesome And Easy - Hot Wheel Storage For Boys Room - How to With Plans! Woodshop Junkies 2023-06-11 | Making a functional decoration for my boy's room. 1:64 diecast storage unit to store, organize, and display my son's Hot Wheel collection. This is a fun and easy shop project I designed to store my son's Hot Wheels but also act as a piece of functional wall art in his room.Get Plans:thewoodworkersplans.com/product/hot-wheels-display-cabinet-diy-plans-simple-assemblyCheck The Woodworkers Plans for plans to this project:thewoodworkersplans.comTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so, therefore, I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
One of a kind | Rotten Tree Stump Turned Into Eye-Catching Table Woodshop Junkies 2023-05-24 | I take a rotten tree stump and turn it into a one of a kind coffee table.The stump in question was removed from my back yard 4 years ago and has been sitting outside exposed to the elements ever since.Now its life has been extended and can be enjoyed as a beautiful piece of functional art. Check out Part 1:youtu.be/jOyefDgybyQCheck The Woodworkers Plans for my project plansthewoodworkersplans.comTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so, therefore, I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Is This A Game Changer? - Peanut Mini Jig Woodshop Junkies 2023-04-24 | Have you seen the Peanut Mini Jig? Neither did I until I was recently asked to test it out.1 Small jig that can accurately create 3 different types of joints in wood or at least that is the claim by the manufacturer. In this video, I take a look at the Peanut Mini Jig. What's it all about and how it works. A big thank you to Hardware Center for supplying the jig so we can take a look at how it works.If you are an RSA local and looking to get your hands on the Peanut Mini Jig you can use the following coupon code to receive an exclusive discount on the following items:CODE: WWJPEANUT5 (valid indefinitely)Peanut Mini Jig:https://hardwarecentre.co.za/product/peanut-mini-jig-set/Peanut Jig Set:https://hardwarecentre.co.za/product/peanut-jig-set/Peanut Cutters:https://hardwarecentre.co.za/product/peanut-cutter-1-2-shank/For the international viewers:If you want more info on the jig you can check out the intelligent Fixings website:intelligentfixings.com/peanut-mini-jigOther videos you might like:Rotten stump turned coffee tableyoutu.be/jOyefDgybyQTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so, therefore, I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Not Every Machine Restoration Has A Happy Ending Woodshop Junkies 2023-04-03 | I enjoy restoring old woodworking/workshop machines but there is a degree of risk involved. Unless you have X-ray eyes it's impossible to know the condition of the internals. Sometimes you spend time and money just to find out a machine is not worth restoring.Check out my other restorations:Wadkin Bursgreen AGS10youtube.com/playlist?list=PLLL4TPJc4T3gU8y83KrKz4qksB7sTNO9DDelta Jointeryoutu.be/GTbs2e71J14Fobco Star Drillyoutu.be/Ct8kNte3CeMTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so, therefore, I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
5 DIY Garden Planters - Cheap, Easy, Fast Woodshop Junkies 2023-03-23 | 5 Super easy garden planter boxes you can build this weekend.Bonus video:These planters are great beginner type woodworking projects that can be put together in no time at all. They don't require a arsenal of expensive tools and they look great! Enjoy.Get The Plans - The Woodworkers Plansthewoodworkersplans.comOther videos you might like:Rotten stump turned coffee tableyoutu.be/jOyefDgybyQTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so, therefore, I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Can A Rotten Tree Stump Become Something Beautiful? Woodshop Junkies 2023-03-12 | 4 years ago my wife and I removed a tree from our backyard that was damaging a wall. Now after 4 years of rot and decay, I want to try and turn the stump into something beautiful and functional.A big THANK YOU to UPAT SA for sponsoring this video. Check out Stabila LAX 600 first look video:youtu.be/twedXx4sANUOr check pricing and availability:https://upat.co.za/product/lax-600-multi-line-laser-7pc/The Woodworkers Plansthewoodworkersplans.comTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so, therefore, I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
The DIY Woodshop Tool You Didnt Know You Needed Woodshop Junkies 2023-01-22 | I am stripping down my workshop and starting from scratch. First I need to clean up!In the desert of sawdust that is my workshop floor lies hidden a trove of screws and hardware. In this video, I make a simple DIY magnet floor sweep so I can easily pick screws and other small pieces of metal out before sweeping or vacuuming up the sawdust. The Woodworkers Plansthewoodworkersplans.comTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so, therefore, I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Taking Apart My Workshop - Time For A Fresh Start Woodshop Junkies 2022-12-28 | 2022 has been an amazing year but it is time for a change.I have planned a completely new layout for my small garage workshop come 2023 but to make my dream a reality I need to say goodbye to some of my best shop projects.The Woodworkers Plansthewoodworkersplans.comTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Secret Drawer Locking Mechanism And Hookless Key Storage - How To Woodshop Junkies 2022-11-27 | For this project, I am having fun with magnets. I am making an entryway table with a clean hookless key storage area and a hidden cash stash.Gravity-actuated plungers limit drawer movement until magnets are placed at strategic points to unlock the hidden drawer compartments. A big THANK YOU to UPAT SA and AEG POWERTOOLS SA for sponsoring this video. Check out AEG products here:takealot.com/seller/toolshed?filter=Brand:AEG&filter=Sellers:29823315&sellers=29823315To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Better Than New! 60 Year Old Drill Restored Woodshop Junkies 2022-10-26 | The latest vintage woodworking machine to find its way into my shop is a Fobco Star Drilling and Milling Machine. I don't think this drill has been used in about 20 years. The electrics are shot and the chuck is seized. Before I can commit to this resto I need to make sure it is repairable.Restoring a vintage Fobco Star Drill Press. I am really enjoying these restorations so let me know if you want to see more of them and I will try and fit in the odd restoration video. To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Super Align & Lock Mechanism - Modular Workbench Solution Woodshop Junkies 2022-09-25 | I have been planning my new and improved Ultimate All-In-One Woodworking Workstation for months. I couldn't jump in and start building it though until I managed to find the perfect Align & Lock Mechanism For Modular Workbenches.I think I may have found the perfect solution.Ultimate All-In-One Workstation Plans - Get it here:thewoodworkersplans.com/product/the-ultimate-all-in-one-woodworking-workbench-complete-plansTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might enjoy:DIY French Cleat Wall:youtu.be/lA3--s1aQp4Gravity Clamp:youtu.be/2mlq9ZPnvigFold Away Miter Saw:youtu.be/3wQZ74Agc0kSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Power Tool Storage On A Budget - Cheap And Easy DIY Woodshop Junkies 2022-08-21 | Getting the workshop organized with 10 scrap wood power tool organizers. Organization is key to maximizing your space in a small woodworking workshop.I designed these 10 power tool storage units on the fly to be cheap, easy, and quick to make but are still compact with easy access. SHOUTOUT TO MY SUPER SUPPORTERS!!!MoondogBjarne WillumsenSteve CimorelliPatric MaherHeino ColynBullwinkle69To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might enjoy:DIY French Cleat Wall:youtu.be/lA3--s1aQp4Gravity Clamp:youtu.be/2mlq9ZPnvigFold Away Miter Saw:youtu.be/3wQZ74Agc0kSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Looking For Something To Build This Weekend? Woodshop Junkies 2022-08-01 | I designed this one-day build for woodworking hobbyists like myself. It is light on material and hardware and can be built with a few basic tools within a day. I focused on a simple assembly to eliminate the need for complex high-end tools. To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Time To Go Cordless? - 18V Router Review - AEG/RIDGID Woodshop Junkies 2022-07-11 | Trim routers are great little machines but how does the AEG or Ridgid machines measure up?In this video I review my AEG BOF18BL trim trim router. As far as I can tell this machine is identical to the Ridgid R86044B.I like the tool but there are one or two small things I am not crazy about.I was given this machine a few months ago by my channel power tool partner but I was not asked/payed to do this review. This is my honest opinion about this tool.To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieGet is in SA:https://aegtools.co.za/products/routers/74-bof-18-bl-18v-brushless-routertakealot.com/seller/toolshed?sellers=29823315Check Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Must Have - Super Garage Workshop Organizer Woodshop Junkies 2022-06-26 | "A place for everything". Words to live by if you want to make the most of a small workshop. In this video, I organize my organizers!A BIG thank you to UPAT SA for sponsoring this video! - http://www.upat.co.zaCheck out SA pricing and availability on all UPAT products.takealot.com/seller/toolshed?sellers=29823315Find out more about AEG power:Cordless Router - https://aegtools.co.za/products/routers/74-bof-18-bl-18v-brushless-routerPercussion Drill - https://aegtools.co.za/products/percussion-drills/63-bsb-18-cbl-percussion-drillCordless Jigsaw - https://aegtools.co.za/products/saws/70-bst-18-blx-18v-brushless-jigsaw.SHOUTOUT TO MY SUPER SUPPORTERS!!!Jan SivokChris SPatrick MaherRyan LongCraig BennisonMoondagTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might enjoy:DIY French Cleat Wall:youtu.be/lA3--s1aQp4Gravity Clamp:youtu.be/2mlq9ZPnvigFold Away Miter Saw:youtu.be/3wQZ74Agc0kSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Where Have I Been? - Jun 2022 - Channel Update Woodshop Junkies 2022-06-16 | Finding the time to share my ideas is getting harder and harder. Soon something will have to give but I have a plan. I hope it works. To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieOther videos you might like:Diamond in the rough table saw:youtu.be/kl0D19L3zYwUltimate Space Saver For Small Workshops:youtu.be/kIeuntHqOFoSmall Shop Drill Press Stand:youtube.com/playlist?list=PLLL4TPJc4T3h9jeImkeejK_AoFM1DZ7jKSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Workshop Extension Cord Storage and Organizer - DIY Reel Woodshop Junkies 2022-05-15 | Getting my workshop organized is a never-ending project.In this video, I jump on getting my extension cords stored and organized with easy on-the-go access.To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might enjoy:DIY French Cleat Wall:youtu.be/lA3--s1aQp4Gravity Clamp:youtu.be/2mlq9ZPnvigFold Away Miter Saw:youtu.be/3wQZ74Agc0kSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Cordless Power Tools? - Perfect Charging Station For Small Workshops - DIY Organizers Woodshop Junkies 2022-04-14 | The downside to going cordless is having batteries and chargers all over the place.In this video, I build a simple DIY wall-mount power tool battery charging station for my cordless tool batteries and chargers. When I need to use my tools on the go I can pop the charger and batteries out to take with me. A BIG thank you to UPAT SA for sponsoring this video! - http://www.upat.co.zaCheck out SA pricing and availability on all UPAT products.takealot.com/seller/toolshed?sellers=29823315To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might enjoy:DIY French Cleat Wall:youtu.be/lA3--s1aQp4Gravity Clamp:youtu.be/2mlq9ZPnvigFold Away Miter Saw:youtu.be/3wQZ74Agc0kSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Garage Find Wood Plane - Can It Be Restored? Woodshop Junkies 2022-03-17 | A beat-up Stanley hand plane has been laying around my shop for some time. It was pretty much useless. In this video, I want to see if I am able to restore an old and damaged hand plane to full functionality. Considering how much these planes cost, if restoring them isn't too much work, I will likely build my collection by restoring old planes. I always see beat-up planes laying around pawn shops and garage sales. To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might enjoy:DIY French Cleat Wall:youtu.be/lA3--s1aQp4Gravity Clamp:youtu.be/2mlq9ZPnvigFold Away Miter Saw:youtu.be/3wQZ74Agc0kSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Good As New! - Vintage Woodworking Machine Restored Woodshop Junkies 2022-02-27 | The latest vintage woodworking machine to find its way into my shop is a Delta jointer planer. The machine has been standing unused for some time but I was confident that it would take much to restore it to its former glory. Restoring a vintage Delta-Milwaukee Wood Jointer. I am really enjoying these restorations so let me know if you want to see more of them and I will try and fit in the odd restoration video. To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might enjoy:DIY French Cleat Wall:youtu.be/lA3--s1aQp4Gravity Clamp:youtu.be/2mlq9ZPnvigFold Away Miter Saw:youtu.be/3wQZ74Agc0kSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Making Use Of Wasted Space - Maximizing Garage Workshop Storage Woodshop Junkies 2022-02-03 | Some power tools are put together in a way that causes them to create zones of wasted space. The wall clearance required to accommodate a drill press motor creates an empty space behind the drill. That space can be better utilized. A vertical drill bit storage seemed to work quite nicely in the space. To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might enjoy:DIY French Cleat Wall:youtu.be/lA3--s1aQp4Gravity Clamp:youtu.be/2mlq9ZPnvigFold Away Miter Saw:youtu.be/3wQZ74Agc0kSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
All About Small Shop Woodworking - Woodshop Junkies 2022 Channel Trailer Woodshop Junkies 2022-01-13 | A channel for beginners and hobbyists with small workshops.In 2022 I'll be gearing up to take my channel to the next level with more and better content. Soon you will also be able to get your hands on most of my original plans via my up-and-coming plans website.To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might enjoy:DIY French Cleat Wall:youtu.be/lA3--s1aQp4Gravity Clamp:youtu.be/2mlq9ZPnvigFold Away Miter Saw:youtu.be/3wQZ74Agc0kSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Screw Feeder - Simplified Design For Easy Assembly Woodshop Junkies 2021-12-22 | Organization needs to be matched with functionality. That is the key to making the most of a small home workshop.This was the inspiration behind my simplified screw feeder. An organization and storage unit that offers immediate and easy access to the screws stored inside.I designed the unit for my most used screw sizes. The ones I use on almost every project I make. Now I can just reach over and grab a handful. A BIG thank you to UPAT for sponsoring this video! - http://www.upat.co.zaFind out more about the Fischer Duo wall plugs:https://www.upat.co.za/products/anchoring-systems/general-fixings/item/577-fischer-duopower-nylon-plugFind out more about Stabila products:https://www.upat.co.za/our-brands/stabilaTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might enjoy:DIY French Cleat Wall:youtu.be/lA3--s1aQp4Gravity Clamp:youtu.be/2mlq9ZPnvigFold Away Miter Saw:youtu.be/3wQZ74Agc0kSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
DIY Drawer Wine Rack - Simplified Assembly For Beginners Woodshop Junkies 2021-11-28 | One of the first additions to my up-and-coming woodworking plans website.I want to simplify project assembly to give hobbyists and beginner woodworkers with limited tools the ability to make more complex projects.I am kicking off with this awesome and super easy-to-make drawered wine rack.Wine organization and storage rack. A must-have for any wine connoisseur and the best part is it is easy to make.GET PLANS:thewoodworkersplans.com/product/diy-drawer-style-wine-rack-easy-woodworking-plansTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might like:Building the ultimate small workshop All-In-One bench (Playlist):youtube.com/playlist?list=PLLL4TPJc4T3ho65tw7orLbkM3hmCpABgROne-Of-A-Kind Tapering Jigyoutu.be/d6vGwG-7W_gMaximizing A Handheld Sanderyoutu.be/gJXSV3ZOU04Rust To Riches - Table Saw Restoreyoutu.be/kl0D19L3zYwSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Automatic Vertical Edge Clamp - How To Woodshop Junkies 2021-11-01 | I came up with the idea for my version of an Auto Actuated Edge Clamp while applying edging to chipboard panels. The Edge Clamp works beautifully with a variety of different sizes, widths, and weight boards. It will be particularly handy when fixing hinges to doors or drilling pocket holes on the edges of large planks and boards.Time will tell but it already seems to be a good addition to my workshop. To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieOther videos you might like:Diamond in the rough table saw:youtu.be/kl0D19L3zYwUltimate Space Saver For Small Workshops:youtu.be/kIeuntHqOFoSmall Shop Drill Press Stand:youtube.com/playlist?list=PLLL4TPJc4T3h9jeImkeejK_AoFM1DZ7jKSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Channel Update - Oct 2021 - Whats Next For Woodshop Junkies? Woodshop Junkies 2021-10-18 | Time to take this channel to the next level.I have been thinking of a few ways of expanding my brand to a point where I could possibly turn Woodshop Junkies into a full-time gig. Turning my hobby into a job. To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieOther videos you might like:Diamond in the rough table saw:youtu.be/kl0D19L3zYwUltimate Space Saver For Small Workshops:youtu.be/kIeuntHqOFoSmall Shop Drill Press Stand:youtube.com/playlist?list=PLLL4TPJc4T3h9jeImkeejK_AoFM1DZ7jKSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Super Strong DIY Alternative - Space Saver On-The-Move Woodshop Junkies 2021-09-30 | I attempt to make a more compact, strong, and stable work surface by taking a swing at a simple re-design to a conventional portable table. In my opinion, most conventional designs are flawed because the mechanism that allows the table to be collapsable is also responsible for carrying a fair amount of load when used as a table. For my first prototype, I attempt to remove the load from the folding mechanisms to allow me to make a much stronger portable table that could even be used as a portable workbench.To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might enjoy:Taper Cutting Jigyoutu.be/d6vGwG-7W_gUltimate Space Saveryoutu.be/kIeuntHqOFoSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Its Alive! Wadkin Bursgreen AGS 10 Restoration Completion And First Cut Woodshop Junkies 2021-09-05 | Restoring A Legend!After months of work, it was time to make the final additions to my Wadkin Bursgreen AGS 10 restoration project before finally getting to use it for the first time.A very big thank you to MAKE SAFE for sponsoring this video.Check out their website to find out more about the MAKE SAFE Power Tool Brake.makesafetools.comOr find them on their socials:instagram.com/makesafetoolsfacebook.com/MAKESafeToolsyoutube.com/channel/UCQCNp0oWrwBDz3yNVIX9UwgTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might like:Part 1 - Diamond in the rough table saw:youtu.be/kl0D19L3zYwPart 2 - Three Phase To Single Phase Conversion:youtu.be/HcWLdUl54pEPart 3 - Cast Iron Top Restoration:youtu.be/OyliENNmxb8Part 4 - Stripping A Wadkin Bursgreen AGS10youtu.be/lvF1uYmKzxIPart 5 - Old Paint Stripped And Primedyoutu.be/7Dx_wbPgm3IPart 6 - Small Parts Primedyoutu.be/M1aqg8P5jqMPart 7 - Paintyoutu.be/DRkaWioBJosBuilding the ultimate small workshop All-In-One bench (Playlist):youtube.com/playlist?list=PLLL4TPJc4T3ho65tw7orLbkM3hmCpABgRSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
5 More! Super Simple Garage Workshop Organizers - HOW TO Woodshop Junkies 2021-08-15 | Making The Most Of A Small Woodworking Workshop. Organization is the key to really get the most out of my small single garage workshop.In this video, I jump on the shop organizers that I couldn't get to in my previous video. 5 More super simple storage and organizer units made from scrap and off-cuts lying around my workshop. Storage organizers:1. Spring Clamp Storage2. Tool Wrench Storage3. Clamp Storage4. General Use Shelf5. Chisel Storage9 Super Simple Shop Organizers - Check out the original video here:youtu.be/PM94Z4eqHJwA BIG thank you to UPAT for sponsoring this video! - http://www.upat.co.zaFind out more about the Fischer Duo wall plugs:https://www.upat.co.za/products/anchoring-systems/general-fixings/item/577-fischer-duopower-nylon-plugFind out more about Stabila products:https://www.upat.co.za/our-brands/stabilaTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might enjoy:Taper Cutting Jigyoutu.be/d6vGwG-7W_gSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Bringing A Vintage Table Saw Back To Life Woodshop Junkies 2021-06-20 | Restoring a legend! - Wadkin Bursgreen AGS 10It is finally time, after months of work, to get some paint on this old cast iron table saw and start assembling.After assembly, I did a quick test and it runs beautifully.To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might like:Part 1 - Diamond in the rough table saw:youtu.be/kl0D19L3zYwPart 2 - Three Phase To Single Phase Conversion:youtu.be/HcWLdUl54pEPart 3 - Cast Iron Top Restoration:youtu.be/OyliENNmxb8Part 4 - Stripping A Wadkin Bursgreen AGS10youtu.be/lvF1uYmKzxIPart 5 - Old Paint Stripped And Primedyoutu.be/7Dx_wbPgm3IPart 6 - Small Parts Primedyoutu.be/M1aqg8P5jqMBuilding the ultimate small workshop All-In-One bench (Playlist):youtube.com/playlist?list=PLLL4TPJc4T3ho65tw7orLbkM3hmCpABgRSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
9 Cheap And Easy Shop Organizers - Super Simple HOW TO Woodshop Junkies 2021-05-23 | The organization of a workshop is the key to making the most of the available space.In this video, I focus on 9 extremely simple and cheap-to-make shop organization projects to improve life in my small woodworking workshop. Most of the projects were made using off-cuts and scrap wood laying around the shop. Storage organizers:1. Tapes2. Gloves3. Magnet Station For Small Metal Tools4. General Hook For Hanging Storage5. Hammers And Mallets6. Pencils And Markers7. Safety Glasses8. Rag DispenserA BIG thank you to UPAT for sponsoring this video! - http://www.upat.co.zaFind out more about the Fischer Duo wall plugs:https://www.upat.co.za/products/anchoring-systems/general-fixings/item/577-fischer-duopower-nylon-plugFind out more about Stabila products:https://www.upat.co.za/our-brands/stabilaTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might enjoy:DIY French Cleat Wall:youtu.be/lA3--s1aQp4Some product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Ultimate Space Saver For Small Workspaces - Mini Workshop P2 Woodshop Junkies 2021-04-27 | I have been working on a design for a compact workspace with multifunctional storage and organization.A Mini-Workshop that won't take up too much space where space is limited. In this video, I work on completing 1 of the 3 major segments that will form my version of the Ultimate Space Saver For Small Workspaces. To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesCheck out Part 1 - The Mechanism:youtu.be/kIeuntHqOFoOr Part 3 - Soft Open And Lockingyoutu.be/zvubf3KSdMESome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Wadkin Bursgreen Restoration - Small Cast Iron Parts Cleaned And Primed Woodshop Junkies 2021-04-10 | Restoring a legend! With all the large cast-iron parts on the Wadkin table saw already cleaned, repaired, and primed, it was time to jump in with the small. In this video, I clean up and restore the small cast iron parts.Time to start prepping for assembly. Next up, the final paint job!To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might like:Part 1 - Diamond in the rough table saw:youtu.be/kl0D19L3zYwPart 2 - Three Phase To Single Phase Conversion:youtu.be/HcWLdUl54pEPart 3 - Cast Iron Top Restoration:youtu.be/OyliENNmxb8Part 4 - Stripping A Wadkin Bursgreen AGS10youtu.be/lvF1uYmKzxIPart 5 - Old Paint Stripped And Primedyoutu.be/7Dx_wbPgm3IBuilding the ultimate small workshop All-In-One bench (Playlist):youtube.com/playlist?list=PLLL4TPJc4T3ho65tw7orLbkM3hmCpABgRSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Shop Update - Mar 2021 - I Have Thought About Quitting Woodshop Junkies 2021-03-25 | I have been struggling to balance work, my private life, and still giving my channel the attention it deserves.In a perfect world, this could have been my job but for now, I need to pay the bills first.Though I have thought about giving up making videos I am not ready to quit Youtube just yet. Especially not while I have the support of my subscribers so I wanted to make a quick video just to thank you all for your continued support. To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieOther videos you might like:Diamond in the rough table saw:youtu.be/kl0D19L3zYwUltimate Space Saver For Small Workshops:youtu.be/kIeuntHqOFoSmall Shop Drill Press Stand:youtube.com/playlist?list=PLLL4TPJc4T3h9jeImkeejK_AoFM1DZ7jKSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Ultimate Space Saver For Small Workspaces - P1 - Mechanism Woodshop Junkies 2021-02-28 | I have been working on a design for a compact workspace with multifunctional storage and organization. I am hoping the design can be adapted to suit a wide range of applications. A compact arts and crafts storage and work unit or a puzzle and toy storage and play unit is just two of the adaptions I would like to explore.In the first part of my Ultimate Space Saving Work Table And Storage Unit, I get rolling on a storage unit that can convert to a table/workbench. I wanted the conversion process to be effortless so I had to get a bit creative with the mechanism.CHECK OUT PART 2 AND 3 NOW:youtu.be/C1Tg1CRxr4Myoutu.be/zvubf3KSdMETo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might like:Diamond in the rough table saw:youtu.be/kl0D19L3zYwOne-Of-A-Kind Taper Cutting Jig:youtu.be/d6vGwG-7W_gMaximizing a Handheld Belt Sander:youtu.be/gJXSV3ZOU04Adjustable Lumber Rack:youtu.be/6_r93KRQTQwUltimate Small Shop Storage:youtu.be/IhZMOnsVRdsBuilding the ultimate small workshop All-In-One bench (Playlist):youtube.com/playlist?list=PLLL4TPJc4T3ho65tw7orLbkM3hmCpABgRSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Cast Iron Table Saw Restoration UPDATE 5 - PRIMER Woodshop Junkies 2021-02-01 | Restoring a legend! I had the old paint stripped off by sandblasting and the crack in the cast iron repaired by professionals.Welding cast iron is specialized work and I didn't want to risk messing it up. Time to start prepping for assembly. First things first, getting a coat of primer on the large saw components. To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might like:Diamond in the rough table saw:youtu.be/kl0D19L3zYwThree Phase To Single Phase Conversion:youtu.be/HcWLdUl54pECast Iron Top Restoration:youtu.be/OyliENNmxb8Stripping A Wadkin Bursgreen AGS10youtu.be/lvF1uYmKzxIBuilding the ultimate small workshop All-In-One bench (Playlist):youtube.com/playlist?list=PLLL4TPJc4T3ho65tw7orLbkM3hmCpABgRSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Scrap/Off-cut Wood Projects You Can Sell Woodshop Junkies 2021-01-10 | I've been looking at projects I can build with Off-cut/Scrap Wood. As woodworkers we generate a fair amount of scrap wood and throwing it out is heartbreaking. In this video, I consider bentwood lamination as an option for scrap wood projects. MAKING A BENTWOOD LAMINATION LAMP.To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might like:Building the ultimate small workshop All-In-One bench (Playlist):youtube.com/playlist?list=PLLL4TPJc4T3ho65tw7orLbkM3hmCpABgROne-Of-A-Kind Tapering Jigyoutu.be/d6vGwG-7W_gMaximizing A Handheld Sanderyoutu.be/gJXSV3ZOU04Rust To Riches - Table Saw Restoreyoutu.be/kl0D19L3zYwSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Maximizing Drill Press Storage - With Removeable Bit Storage Woodshop Junkies 2020-12-19 | PART 2 Organization and storage is key to making the most of my small shop.That is why I wanted my new drill press stand to have as much as possible functional storage and organization drawers.Purpose-built drawers to maximize my drill press storage. Maximizing Drill Press Storage - Part 1:youtu.be/wY63ZIhssU0To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might like:Building the ultimate small workshop All-In-One bench (Playlist):youtube.com/playlist?list=PLLL4TPJc4T3ho65tw7orLbkM3hmCpABgROne-Of-A-Kind Tapering Jigyoutu.be/d6vGwG-7W_gSander And Sand Paper Storage And Organizeryoutu.be/FQnB_1rL1eARust To Riches - Table Saw Restoreyoutu.be/kl0D19L3zYwSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Maximizing Drill Press Storage - Building A Better Drill Press Stand Woodshop Junkies 2020-12-13 | Organization and storage is key to making the most of my small shop.That is why I wanted my new drill press stand to have as much as possible functional storage and organization drawers.Purpose-built drawers to maximize my drill press storage. Check out PART 2:youtu.be/tr4uhuloIGUTo support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might like:Building the ultimate small workshop All-In-One bench (Playlist):youtube.com/playlist?list=PLLL4TPJc4T3ho65tw7orLbkM3hmCpABgROne-Of-A-Kind Tapering Jigyoutu.be/d6vGwG-7W_gMaximizing A Handheld Sanderyoutu.be/gJXSV3ZOU04Rust To Riches - Table Saw Restoreyoutu.be/kl0D19L3zYwSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Is It Worth The Money? FESTOOL TS55 REVIEWED Woodshop Junkies 2020-11-17 | Is the Festool TS55 track saw worth the money? Is it an option for hobbyist woodworkers? In this video, I do a performance test and take a look at some of the saw features in an attempt to answer these questions.Festool TS 55 REBQ Track Saw Review.A big thank you to Top Dog Tool Shop for their continued support of my channel and sponsoring this video by giving me the opportunity to take a look at the saw.https://topdogtoolshop.co.za/SA locals can check out the BIG ORANGE THING to see live demonstrations by Festool and 19 other of the top brands available in SA.facebook.com/events/713042852633970To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might like:Building the ultimate small workshop All-In-One bench (Playlist):youtube.com/playlist?list=PLLL4TPJc4T3ho65tw7orLbkM3hmCpABgROne-Of-A-Kind Tapering Jigyoutu.be/d6vGwG-7W_gMaximizing A Handheld Sanderyoutu.be/gJXSV3ZOU04Rust To Riches - Table Saw Restoreyoutu.be/kl0D19L3zYwSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Awesome Amateur DIY Wood Project - WITH PLANS Woodshop Junkies 2020-11-06 | I wanted to start sharing some of my project builds not related to my shop and I figured I would start with a nice and simple one. This is my version of a convertible 2 in1 garden bench/picnic table. I simplified the design to minimize power tool requirements by using standard lumber sizes.This is a great project for beginner woodworkers who want to build something different.To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might like:Building the ultimate small workshop All-In-One bench (Playlist):youtube.com/playlist?list=PLLL4TPJc4T3ho65tw7orLbkM3hmCpABgROne-Of-A-Kind Tapering Jigyoutu.be/d6vGwG-7W_gMaximizing A Handheld Sanderyoutu.be/gJXSV3ZOU04Rust To Riches - Table Saw Restoreyoutu.be/kl0D19L3zYwSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Taking Apart A Wadkin Bursgreen AGS10 Table Saw Woodshop Junkies 2020-10-14 | Time to take apart my vintage Wadkin Bursgreen saw and take stock of the damage. I needed to go through all the components individually to work on a service and repair game plan.Taking the saw apart was simple enough and I was happy to find that there is less damage than I originally anticipated. To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might like:Diamond in the rough table saw:youtu.be/kl0D19L3zYwThree Phase To Single Phase Conversion:youtu.be/HcWLdUl54pECast Iron Top Restoration:youtu.be/OyliENNmxb8Building the ultimate small workshop All-In-One bench (Playlist):youtube.com/playlist?list=PLLL4TPJc4T3ho65tw7orLbkM3hmCpABgRSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
Retractable Bench Wheels - Why Buy If You Can DIY? Woodshop Junkies 2020-10-07 | To make the most of my small woodworking workshop I need the ability to move things around. Because I hope to add this mechanism to all my shop benches and stand I designed and built my own version of retractable caster wheels. To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might like:Building the ultimate small workshop All-In-One bench (Playlist):youtube.com/playlist?list=PLLL4TPJc4T3ho65tw7orLbkM3hmCpABgROne-Of-A-Kind Tapering Jigyoutu.be/d6vGwG-7W_gMaximizing A Handheld Sanderyoutu.be/gJXSV3ZOU04Rust To Riches - Table Saw Restoreyoutu.be/kl0D19L3zYwSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
One-Of-A-Kind Tapering Jig Woodshop Junkies 2020-09-22 | Needed to cut a few last-minute tapers for my next build so I designed this jig. The result was this very simple and low hardware taper cutting table saw sled.To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might like:Diamond in the rough table saw:youtu.be/kl0D19L3zYwBuilding the ultimate small workshop All-In-One bench (Playlist):youtube.com/playlist?list=PLLL4TPJc4T3ho65tw7orLbkM3hmCpABgRFolding Miter Saw Station:youtu.be/3wQZ74Agc0kBench Top Power Socket:youtu.be/h0Ky8jjGWckFrench Cleat Wall:youtu.be/lA3--s1aQp4Belt Sander Jig:youtu.be/gJXSV3ZOU04Some product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
From Rust To Riches - Restoring 40 Year Old Cast Iron Woodshop Junkies 2020-09-13 | Restoring the cast iron top of my 40+-year-old Wadkin Bursgreen table saw.I try to get it back to its factory shine which proves to be harder than it seemed.To support my channel visit one of our merch stores:USA - teespring.com/stores/woodshop-junkies-usaEU - teespring.com/stores/woodshop-junkies-euOr follow my projects on social media:Facebook: facebook.com/woodworkjunkiesiteInstagram: instagram.com/woodworkjunkieCheck Out My Gear (Affiliate):USA - amazon.com/shop/woodshopjunkiesUK - amazon.co.uk/shop/woodshopjunkiesOther videos you might like:Diamond in the rough table saw:youtu.be/kl0D19L3zYwThree Phase To Single Phase Conversion:youtu.be/HcWLdUl54pEBuilding the ultimate small workshop All-In-One bench (Playlist):youtube.com/playlist?list=PLLL4TPJc4T3ho65tw7orLbkM3hmCpABgRBench Top Power Socket:youtu.be/h0Ky8jjGWckAdjustable Lumber Rack:youtu.be/6_r93KRQTQwFrench Cleat Wall:youtu.be/lA3--s1aQp4Small Parts Organizer And Storageyoutu.be/zMgQcKt7wPUSome product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support. Disclaimer.All of the videos on this channel are intended for entertainment purposes only. Should you choose to make or do anything as depicted on this channel you would do so at your own risk.Woodworking and the use of power tools can be extremely dangerous.The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct. Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer. Always use protective gear where applicable and never attempt something you are not comfortable doing. Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do. Please, stay safe and work smart.
