Limitless ResearchThis Grebennikov video replication series is meant to invoke critical thinking when viewing similar videos claiming to use the cavernous structure effect.
This video is not evaluating Grebenikov's theory or the validity of the cavernous structure effect (CSE). It is evaluating the videos on YouTube that claim to be use the CSE.
While I feel the original video was faked, I believe it helped inspire many people to look into Grebennikov's research. These people, myself included, may not have done any research into the CSE had they not seen these videos. To that I say, well done sir.
Explanation Attracting Elytra - Grebennikov Video Replication SeriesLimitless Research2014-01-31 | This Grebennikov video replication series is meant to invoke critical thinking when viewing similar videos claiming to use the cavernous structure effect.
This video is not evaluating Grebenikov's theory or the validity of the cavernous structure effect (CSE). It is evaluating the videos on YouTube that claim to be use the CSE.
While I feel the original video was faked, I believe it helped inspire many people to look into Grebennikov's research. These people, myself included, may not have done any research into the CSE had they not seen these videos. To that I say, well done sir.
Please leave your thoughts and comments below,
Thanks for watching, RussellOur Version of the Chicken TractorLimitless Research2021-04-26 | Here’s our new chicken tractor. I hope it helps you with yours.MagneGas Flame Tests (Metal Ions in the Gas?)Limitless Research2017-05-20 | Please consider contributing to my research. Patreon: patreon.com/Limitless_Research
Inspired by Stanley Meyer, Dr. Ruggero Sanyilli, James Robey, Frank Sullivan, & many other YouTube members.
This video is testing the possibility of getting metal into gas/ion form by passing it through an underwater high amp electric arc.
In this experiment two carbon graphite rods arc in a copper sulfate solution. The gas collected is ignited and the color of the flame is observed.
Thanks for watching, RussellA Look Inside the Multi-Gas Processor Using Halogen Bulbs as the Photon SourceLimitless Research2016-09-28 | If you enjoy my videos, please consider contributing to my research. Patreon: patreon.com/Limitless_Research
Inspired by Stanley Meyer, RWG Research, David Bixler & many other YouTube members.
This video takes a look inside of the new gas processor before I assemble it. I go over the materials used and why they were chosen.
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellEPG Tests 003 - Hydrogen (H2) & Oxygen (O2) Through a Magnetic FieldLimitless Research2016-03-26 | If you enjoy my videos, please consider contributing to my research. Patreon: patreon.com/Limitless_Research
Inspired by Stanley Meyer, Russ Gries, Max Miller, Frank Sullivan, David Bixler, & many other YouTube members.
This video is testing (H2 & O2, in a 2:1 ratio respectively, passing through a magnetic field of 500+ Gauss) for magnetic properties. The gas mixture passes through a 1/4" copper tube surrounded coils in series and parallel arrangements. For the test we are looking for a change on the oscilloscope voltage readings when compared to ambient conditions and to a control test of ambient air.
Test Conclusion: This gas mixture does not induce a voltage in the pick-up coils.
Thanks for watching, RussellEPG Tests 002 - Hydrogen (H2) & Oxygen (O2) 2:1 RatioLimitless Research2016-03-20 | If you enjoy my videos, Please consider contributing to my research. Patreon: patreon.com/Limitless_Research
Inspired by Stanley Meyer, Russ Gries, Max Miller, Frank Sullivan, David Bixler, & many other YouTube members.
This video is testing H2 & O2, in a 2:1 ratio respectively, for magnetic properties. The gas mixture passes through a 1/4" copper tube surrounded coils in series and parallel arrangements. For the test we are looking for a change on the oscilloscope voltage readings when compared to ambient conditions and to a control test of ambient air.
Test Conclusion: This gas mixture does not induce a voltage in the pick-up coils.
In 2013, I made this mistake. Please use caution. This is an explosion while creating Magnegas.
30-50v DC with carbon graphite electrodes under water.EPG Tests 001 - Series IntroLimitless Research2016-03-12 | If you enjoy my videos, Please consider contributing to my research. Patreon: patreon.com/Limitless_Research
Inspired by Stanley Meyer, Russ Gries, Max Miller, Frank Sullivan, David Bixler, & many other YouTube members.
This video is an introduction to a new video series that focuses on testing the different theories of how the pump version EPG device works. I will post a new video showing the results of each test. The goal is to find out which theories show promise and which do not. I hope the results will guide other EPG researchers in the right direction.
Please feel free to add any tests you would like to see preformed and your reasons why in the comments below. Constructive criticism is welcomed.
Thanks for watching, RussellPMBO 2014 Final EntryLimitless Research2014-12-14 | Here it is. Final entry for PMBO 2014.
I will continue working on the ion antenna to see if how much energy I can gather. As of right now, I am not able to gather enough to run this pulse motor. This entry is running on a super cap charged by a battery. I do have a 50 foot antenna erected, but have had a lot of bad weather that is effecting my tests. I hope to have better results this next week.
Thanks for watching, Russell MartinPMBO 2014 Update 5 (The Pulse Motor)Limitless Research2014-12-07 | Just an update on the build. Currently I'm attempting to maximize the small power I have to run a magnetically suspended axle and a light motor. For this version I'm using a 12 point starship coil, cap, and reed switch. That may change, but this is my focus at the time.
Thanks for watching, Russell MartinPMBO 2014 Update 4 (Atmospheric ions & ground rod)Limitless Research2014-11-30 | 18v!!! 3 times the collectors (12) and running it during peak sunlight hours (11am-3pm) made a huge difference.
This ion collection system can be improved on in many ways, moistening the ground rod soil, better insulation, using nano-spikes (graphite powder) on the collectors, etc... but I don't have time right now as I am in the middle of moving. I will stick to 18v for the PMBO this year.PMBO 2014 Update 3 (Atmospheric ions & ground rod)Limitless Research2014-11-29 | 6.42v charged over an 18 hr period!PMBO 2014 Update 2 (Atmospheric ions & ground rod)Limitless Research2014-11-29 | Here's a look at the new stationary setup. So far the best results I have seen have been with this setup. 4.34v in 1hr. I'm going to leave it charging over night to see how high it can charge. Update soon to followPMBO 2014 update 1 (atmospheric ions & ground rod)Limitless Research2014-11-28 | I gave up on the kite due to lack of wind in my area this week. The balloon is also giving me problems. As the wind changes directions frequently, the string and wire tangle on bushes and needs to be untangled every 2-5 mins. I plan on attempting some sort of stationary poll method next. A stationary setup will allow me to charge for longer periods of time without the need for me to be there constantly making adjustments.
Thanks for watching, RussPMBO 2014 - Plan for the build (Atmospheric ions & ground rod)Limitless Research2014-11-15 | Pulse Motor Build Off (PMBO) 2014 - Planning
My goal is to use a box kite with conductive material on each panel to gather an atmospheric ionic charge on one side of a capacitor and a ground rod to gather the opposite charge on the other side of the capacitor. Testing will begin once the kite is built.
I'm looking forward to seeing everyone's builds and ideas this year!
Thanks for watching, Russell MartinExplanation Bouncing Elytra - Grebennikov Video Replication SeriesLimitless Research2014-02-01 | This Grebennikov video replication series is meant to invoke critical thinking when viewing similar videos claiming to use the cavernous structure effect.
This video is not evaluating Grebenikov's theory or the validity of the cavernous structure effect (CSE). It is evaluating the videos on YouTube that claim to be use the CSE.
While I feel the original video was faked, I believe it helped inspire many people to look into Grebennikov's research. These people, myself included, may not have done any research into the CSE had they not seen these videos. To that I say, well done sir.
Please leave your thoughts and comments below,
Thanks for watching, RussellExplanation Repelling Elytra - Grebennikov Video Replication SeriesLimitless Research2014-01-30 | This Grebennikov video replication series is meant to invoke critical thinking when viewing similar videos claiming to use the cavernous structure effect.
This video is not evaluating Grebenikov's theory or the validity of the cavernous structure effect (CSE). It is evaluating the videos on YouTube that claim to be use the CSE.
While I feel the original video was faked, I believe it helped inspire many people to look into Grebennikov's research. These people, myself included, may not have done any research into the CSE had they not seen these videos. To that I say, well done sir.
Please leave your thoughts and comments below,
Thanks for watching, RussellExplanation Hovering Elytra - Grebennikov Video Replication SeriesLimitless Research2014-01-29 | If you enjoy my videos, Please consider contributing to my research. Patreon: patreon.com/Limitless_Research
This Grebennikov video replication series is meant to invoke critical thinking when viewing similar videos claiming to use the cavernous structure effect.
Answer: Thread used to create the illusion of hovering
This video is not evaluating Grebenikov's theory or the validity of the cavernous structure effect (CSE). It is evaluating the video on YouTube that claims to be use the CSE.
While I feel the original video was faked, I believe it helped inspire many people to look into Grebennikov's research. These people, myself included, may not have done any research into the CSE had they not seen these videos. To that I say, well done sir.
Please leave your thoughts and comments below,
Thanks for watching, RussellExplanation Spinning Elytra - Grebennikov Video Replication SeriesLimitless Research2014-01-28 | This Grebennikov video replication series is meant to invoke critical thinking when viewing similar videos claiming to use the cavernous structure effect.
This video is not evaluating Grebenikov's theory or the validity of the cavernous structure effect (CSE). It is evaluating the videos on YouTube that claim to be use the CSE.
While I feel the original video was faked, I believe it helped inspire many people to look into Grebennikov's research. These people, myself included, may not have done any research into the CSE had they not seen these videos. To that I say, well done sir.
Please leave your thoughts and comments below,
Thanks for watching, RussellExplanation Spinning Compass - Grebennikov Video Replication SeriesLimitless Research2014-01-27 | This Grebennikov video replication series is meant to invoke critical thinking when viewing similar videos claiming to use the cavernous structure effect.
While I feel the original video was faked, I believe it helped inspire many people to look into Grebennikov's research. These people, myself included, may not have done any research into the CSE had they not seen these videos. To that I say, well done sir.
Please leave your thoughts and comments below,
Thanks for watching, RussellBouncing Elytra - Grebennikov Video Replication SeriesLimitless Research2014-01-26 | This Grebennikov video replication is meant to invoke critical thinking. Please tell me how you think the effect is happening in the comment section below. Double helix vortex? Gravitational interference?
This video is not evaluating Grebenikov's theory or the validity of the cavernous structure effect (CSE). It is evaluating the videos on YouTube that claim to be using this effect.
Thanks for watching, RussellAttracting Elytra - Grebennikov Video Replication SeriesLimitless Research2014-01-25 | This Grebennikov video replication is meant to invoke critical thinking. Please tell me how you think the effect is happening in the comment section below. Vortex in the aether? Gravitational interference? Nano-structure amplification?
This video is not evaluating Grebenikov's theory or the validity of the cavernous structure effect (CSE). It is evaluating the videos on YouTube that claim to be using this effect.
Thanks for watching, RussellRepelling Elytra - Grebennikov Video Replication SeriesLimitless Research2014-01-24 | This Grebennikov video replication is meant to invoke critical thinking. Please tell me how you think the effect is happening in the comment section below. Double helix vortex? Gravitational interference?
This video is not evaluating Grebenikov's theory or the validity of the cavernous structure effect (CSE). It is evaluating the videos on YouTube that claim to be using this effect.
Thanks for watching, RussellHovering Elytra - Grebennikov Video Replication SeriesLimitless Research2014-01-23 | If you enjoy my videos, Please consider contributing to my research. Patreon: patreon.com/Limitless_Research
This Grebennikov video replication is meant to invoke critical thinking. Please tell me how you think this effect is happening in the comment section below. Static-electricity? Double helix vortex? Gravitational interference?
This video is not evaluating Grebenikov's theory or the validity of the cavernous structure effect (CSE). It is evaluating the videos on YouTube that claim to be using this effect.
Thanks for watching, RussellSpinning Elytra - Grebennikov Video Replication SeriesLimitless Research2014-01-22 | This Grebennikov video replication is meant to invoke critical thinking. Please tell me how you think this effect is happening in the comment section below. Static-electricity? Double helix vortex? Gravitational interference?
This video is not evaluating Grebenikov's theory or the validity of the cavernous structure effect (CSE). It is evaluating the videos on YouTube that claim to be using this effect.
Thanks for watching, RussellSpinning Compass - Grebennikov Video Replication SeriesLimitless Research2014-01-21 | If you enjoy my videos, Please consider contributing to my research. Patreon: patreon.com/Limitless_Research
This Grebennikov CSE video replication is meant to invoke critical thinking. Please tell me how you think this effect is happening in the comment section below. Static-electricity? Double helix vortex? Gravitational interference?
This video is not evaluating Grebenikov's theory or the validity of the cavernous structure effect (CSE). It is evaluating the videos on YouTube that claim to be using this effect.
Thanks for watching, RussellPMBO 2013 - WinnersLimitless Research2013-11-17 | Winners from the PMBO 2013 contest.
Contest put on by RWGresearch.com Winners compilation video by Gery Hendershot aka SmartScarecrow
Thanks for watching, RussellPMBO 2013 - Participant EntriesLimitless Research2013-11-17 | Participant entries for the Pulse Motor Build Off 2013 contest.
PMBO contest put on by RWGresearch.com Compilation video by Gery Hendershot (SmartScarecrow)
Thanks for watching, RussellAnodizing AluminumLimitless Research2013-10-22 | Anodizing Aluminum
Steps: Put on gloves and goggles Clean and degrease part Desmut in lye water (Draino, Liquid Plumr) 2-3 mins Rinse in distilled water Wipe off the smut (black stuff) with wet paper towel or toothbrush Prepare acid 19% and let cool Anodize 1-2 hours Rinse in distilled water Die 2-20mins 90°F Seal in boiling water 30-60 mins
If you don't like the finish you can remove the anodized layer by putting it back in the lye water (Draino, Liquid Plumr) for 5-10 mins.
Thanks for watching, RussLimitless Research Channel Intro VideoLimitless Research2013-10-12 | We are currently focused on Stanley Meyer's EPG gas. It's chemical make-up, it's function, & devices used to create it.
Please join the research and help give this technology to the world by commenting on the videos, emailing me for further discussions, or posting your own research results.
Thanks for watching, Limitless ResearchViktor Grebennikov #2 - Static Electricity EffectLimitless Research2013-10-02 | If you enjoy my videos, Please consider contributing to my research. Patreon: patreon.com/Limitless_Research
Inspired by Viktor Grebennikov and TheRealVerbs.
If you liked this video, check out my new series. youtube.com/playlist?list=PLw5nod7UMEzbpSFiJ5jb8eLCF5ffCTguy This video demonstrates the static electric effect of nylon and other plastics on dry leaves. After seeing many videos on this phenomenon using beetle wing covers, I decided to attempt to replicate the results for myself. So far I have been able to replicate them repelling each other up to 4-5", stick to & repel from stainless steel, & stick to aluminum. All of these are mimicked with dry leaves to show that there is nothing special about the wing covers when placed in a static electric field. I will continue the research into the areas Viktor Grebennikov began in, CSE of larger structures (honeycomb, bee & wasp hives) and their effect on carbon graphite. I will upload any interesting results.
CONCLUSION: Videos that show this effect on beetle wing covers while using any of the following are hoaxes and misleading (nylon, plastic, plexiglas, ect...). Wing covers will not show this effect on grounded materials and other objects (dry leaves shown here) will mimic the same results if placed in an electric field. My research will continue with this in mind.
As crazy as this sounds, the point of this research is to be able to replicate the flying platform made by Viktor Grebennikov. This would involve identifying the nonostructures that cause the hover effect and possibly have them replicated onto sheets. Viktor claimed he used beetle wing covers to create a flying platform that could reach speeds up to 1500+ mph without feeling the effects of inertia, wind, or air friction. For those viewers who do not know anything about this research, please visit this website for more information. http://www.keelynet.com/greb/greb.htm
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellViktor Grebennikov #1 - Testing Scarab (June Bug) Wing CoversLimitless Research2013-09-26 | If you enjoy my videos, Please consider contributing to my research. Patreon: patreon.com/Limitless_Research
This video demonstrates effects of Scarab (June Bug) wing covers reacting to metal and each other while on top of nylon. After seeing many videos on this phenomenon, I decided to attempt to replicate the results for myself. So far I have been able to replicate them repelling each other up to 4-5", stick to & repel from stainless steel, & stick to aluminum. I would like to see them hover one above the other, but have not been able to accomplish this yet. To me this looks like a STATIC ELECTRICITY effect from the nylon because it only works while they are on the nylon. I will try these and other wing covers on other materials as the research continues.
CONCLUSION: Videos that show this effect while using any of the following are hoaxes and misleading (nylon, plastic, plexiglas, ect...) These shells will not show this effect on grounded materials. My research will continue with this in mind.
As crazy as this sounds, the point of this research is to be able to replicate the flying platform made by Viktor Grebennikov. This would involve identifying the nonostructures that cause the hover effect and possibly have them replicated onto sheets. Viktor claimed he used beetle shells to create a flying platform that could reach speeds up to 1500 mph without feeling the effects of inertia, wind, or air friction. For those viewers who do not know anything about this research, please visit this website for more information. http://www.keelynet.com/greb/greb.htm
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellPMBO 2013 #6- (Final Video) Stimulated Gas EMF Driving a Pulse MotorLimitless Research2013-09-22 | Pulse Motor Build-Off 2013 (Update & Final Video 09/21/13 7pm) Inspired by Stanley Meyer, RWG Research, many other YouTube members.
Hello, you may know me as Limitless on the forums. This is my first time entering the PMBO & my first time attempting to make a pulse motor. I had a great time, can't wait till next year! Next time I will give myself more than 5 days to build a pulse motor.
I found out that the electromagnetic field (EMF) produced by a stimulated gas (fluorescent bulb) can stimulate a pickup coil enough to charge a capacitor to the point of running a pulse motor. My previous video shows that after 8 hours this setup will charge the cap to 7 volts. With a little math, this tells me it will take 43 hours and 8 coils to fully charge this capacitor. When the cap is discharged it stimulates all 4 coils at the same time to produce about 10 revolutions from the rotor.
This is not an efficient way to collect power or to run a motor, but I did accomplish my goal by proving that power can be collected from a stimulated gas. I would love to see someone who is better at electronics improve on this concept and show their results. I hope this inspires someone.
Thanks to Russ and the judges for hosting this contest. This is a great way to share ideas and create new contacts.
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellPMBO 2013 #5- (Update) EMF Charges Capacitor to 7 Volts!!!Limitless Research2013-09-19 | Pulse Motor Build-Off 2013 (Update 09/19/13 10am)
Inspired by Stanley Meyer, RWG Research, many other YouTube members.
Hello, you may know me as Limitless on the forums. This video shows the EMF from fluorescent tubes charging a capacitor to 7 volts. The voltage stored in the cap should be able to run the pulse motor. Now I just need to connect the circuits together. Potentially you could have multiple coils leading to a bus-bar to have a higher starting voltage to charge the cap with. This would decrease charging speed and increase the stored voltage in the cap. Now its time to finish the Ossie motor.
Updates will follow.
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellPMBO 2013 #4 - (Update) Results From Testing Different CoilsLimitless Research2013-09-19 | Pulse Motor Build-Off 2013 (Update 09/19/13 2am)
Inspired by Stanley Meyer, RWG Research, many other YouTube members.
Hello, you may know me as Limitless on the forums. This video shows the EMF from fluorescent tubes charging a capacitor. The voltage stored in the cap should be able to run the pulse motor. Now I just need to connect the circuits together. I'm going to let it charge overnight (5hrs more hrs) and see what the voltage climbs to. Very exciting!
Updates will follow.
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellPMBO 2013 #3 - (Update) Progress on the Pulse MotorLimitless Research2013-09-19 | Pulse Motor Build-Off 2013 (Update 09/18/13)
Inspired by Stanley Meyer, RWG Research, Skycollections & many other YouTube members.
Hello, you may know me as Limitless on the forums. This video shows my progress at this point building the Ossie pulse motor that will be running on the EMF from a fluorescent tube. I am using a schematic by YouTube user Skycollections and parts I have on hand. It is mostly finished. I just need to put it all together and get the capacitor to charge to somewhere between 1-2v. I'll save that for tomorrow.
Updates will follow.
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellPMBO 2013 #2 - (Update) Initial DC Results & Plan for the Pulse MotorLimitless Research2013-09-18 | Pulse Motor Build-Off 2013 (Update 09/17/13)
Inspired by Stanley Meyer, RWG Research, & many other YouTube members.
Hello, you may know me as Limitless on the forums. This video demonstrates that power can be collected from the fluctuating EMF emitting off a stimulated gas tube (fluorescent bulb seen here). I still need to work out the power harnessing efficiency with coil wire gauge, number of coils, capacitor size, resistor size, ect.. I also still need to build a motor that will spin on this low power.
Updates will follow.
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellPMBO 2013 #1 - (Entry Video) Stimulated Gas Driven Electric MotorLimitless Research2013-09-16 | Pulse Motor Build-Off 2013 (Entered 09/15/13)
Inspired by Stanley Meyer, RWG Research, & many other YouTube members.
Hello, you may know me as Limitless on the forums. This is my entry video which describes the idea and plan for the build. The idea is to use a A/C powered fluorescent tube containing gas which is stimulated at a pulse rate of 60Hz/sec. This stimulation should produce an electromagnetic field (EMF) that builds and collapses at the same rate. I will be using pickup coils to collect this EMF and use that power to make something spin. I will be making a small motor to run off the power collected. The main reason for this build is to test the EMF output of a fluorescent tube.
Updates will follow.
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellLaser EPG 020 - Magnetic Gas Production PossibilitiesLimitless Research2013-08-08 | Inspired by Stanley Meyer, RWG Research, M3sca1 , electro1622 & many other YouTube members. This is the twentieth video of many to come. I will be focusing my efforts on building a Laser Electrical Particle Generator (L-EPG) similar to the one Stanley Meyer talks about in the New Zealand lecture video.
This video focuses on a summary of my past year of research on the Laser EPG and the conclusion it has lead me to. I mention 4 different processes I will be testing in my attempt to create a magnetic gas. I also mention the new design of the Laser EPG itself.
If you are able to help with parts, please send me an email. I still need the 2 U-cores for the VIC coil (1200 perm).
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellLaser EPG 019 - Creating Magnetic Gas, Toroidal Shapes (Magnegas, Magnehyrogen, MagneFuel)Limitless Research2013-06-01 | Inspired by Stanley Meyer, RWG Research, Dr. Ruggero Maria Sanyilli, & many other YouTube members. This is the nineteenth video of many to come. I am focusing my efforts on building a Laser Electrical Partial Generator (EPG) similar to the one Stanley Meyer talks about in the New Zealand lecture video.
This video focuses on MagneGas. I am only attempting to spread the word of how magnetic gas can be made. My hope is if we understand the process of how MagneGas is produced, it will help us understand how Stan Meyer made his magnetic gas. Stan said that there are many different atom combinations that will produce magnetic gas. This looks like one of them.
I am not saying this is the exact method Stan used. I merely want to introduce the technology in the hopes that it will further our research and collective knowledge on magnetic gas production.
Power Source: "The power source is, for example, an AC-DC welder; a high voltage DC current source; a pulsed DC current source, pulsating at a frequency which is a sub-multiple of a resonating frequency of the selected liquid [Ex: Water 60Hz]; an AC welder; an AC source with variable high voltage and high frequency; an AC source with variable frequency which is a sub-multiple of the resonating frequency of the selected liquid; or other commercially available sources of electricity suitable to create a submerged electric arc. "
Optimizing the energy of the gas: "The energy of the output, is increased significantly by several factors. A first factor is the use of a DC current with high voltage, such as 100,000 VDC current. Another factor is the use of a high voltage DC current pulsating at a resonating frequency [42KHz for water] or sub-multiple of the resonating frequency [60Hz for water] of the processed liquid (feedstock). Another factor is forcing the liquid (feedstock) through the arc to reduce collection of gas bubbles within the arc that lead to unwanted ignition of the gas bubbles and/or the arc passing through the higher impedance gas bubbles rather than the lower impedance liquid (feedstock)."
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellSonoluminescence 002 - Finally able to capture results on film (Multibubble)Limitless Research2013-04-28 | If you enjoy my videos, Please consider contributing to my research. Patreon: patreon.com/Limitless_Research
Inspired by TheRealVerbz, electro1622 & many other YouTube members. This is my second video on sonoluminescence. I just wanted to show you my results so far. I am excited that I finally learned how to do long exposure times on my camera and am now able to capture my results on film. I hope you enjoy the results. More to follow.
Error fix: I misquoted my findings. The article I read actually said 1/5th atmospheric pressure works best, not -5atm. Just thought I'd correct that.
List of items I used: Piezoelectric Transducer Ceramic Element x 2 = $13 100ml round bottom boiling flask x 1 = $10 Rubber stopper $5 10ml syringe with 20 gauge needle Pulse generator (1 microsecond/1 million Hz) sign-wave capable $35 Audio amplifier to boost signal $16:
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellSonoluminescence 001 - Cavitation using 2 transducers (Multibubble)Limitless Research2013-03-06 | If you enjoy my videos, Please consider contributing to my research. Patreon: patreon.com/Limitless_Research
Inspired by TheRealVerbs, UCLA Research & many other YouTube videos on sonoluminescence & cavitation.
This video shows my attempt to reproduce sonoluminescence cavitation, also known as "Star in a Jar". I am using two high frequency transducers (60W, 40KHz), which I found on eBay for around $10 each. You can also use small piezoelectric speakers, which are less expensive. The frequency required varies with the amount of fluid you use and the size/shape of the container. Most of the research I found online say this occurs between 25KHz and 30KHz. This video shows the cavitation, which becomes visible in many different octaves starting around 26KHz, but the light isn't visible in the cavitations until 100KHz-270Khz. I found it best to move my setup to a dark room, wait a few minutes for my eyes to adjust then go through frequencies looking for light.
I have read that it is best to use distilled water and to "degas" the water by boiling it and letting it cool twice. This helps remove a lot of the infused gases that are trapped within the water. Some people add 10ml of glycerin to aid the reaction process. I used filtered water and boiled it twice. As you can see by my results, there is still a lot of trapped gas in my water.
New Test Results (04/01/2013): Using a 100ml boiling flask sealed using a rubber stopper using the same transducers hot glued 180 degrees to each other and the water level located at the top of the sphere, these are my findings which produce the most light (Sonoluminescence). Liquid: Distilled water, no additives Temp: The colder the better (ideally 33F) Frequency: Pulse width 80KHz, Space width 100KHz Pressure: 10ml air removed from flask (estimated 1/3 to 1/5th atm)
At this point, I have only been able to produce multi-bubble sonoluminescence (MBSL). I hope to achieve single-bubble sonoluminescence (SBSL) and get it on film. Currently I do not have a camera capable of the necessary 1-2min exposures time needed to capture this on film. When/if I do, videos of my results will follow.
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellLaser EPG 018 - Testing the new gas processor design for corona dischargeLimitless Research2013-02-27 | Inspired by Stanley Meyer, RWG Research, & many other YouTube members. This is the eighteenth video of many to come. I will be focusing my efforts on building a Laser Electrical Partial Generator (EPG) similar to the one Stanley Meyer talks about in the New Zealand lecture video.
This video focuses on testing the latest gas processor design for corona discharge. It puts off more than I expected. I am very pleased with the results.
Please feel free to leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellAdjustable Tint Sunglasses (New & Vintage) Polarized Lenses & Electronic Liquid CrystalLimitless Research2013-02-15 | If you enjoy my videos, Please consider contributing to my research. Patreon: patreon.com/Limitless_Research
This video is just a quick overview of some manual and electronic adjustable tint sunglasses and the tech behind them.
Adjustable Tint LCD Sunglasses ($35 + shipping) Identical to the ones in my video. https://gadgetworld.shop/products/men-sunglasses-with-variable-electronic-tint-control-lens-smart-sunglasses-men-polarized-for-driving-fishing-travelling-2018-new
Please feel free to ask questions and leave your comments.
Thanks for watching, RussellEd Leedskalnins Perpetual Motion Holder PMH (Testing 1 coil 1 layer)Limitless Research2013-01-23 | If you enjoy my videos, Please consider contributing to my research. Patreon: patreon.com/Limitless_Research
Inspired by Ed Leedskalnin, David Lambright, RWG Research, & many other YouTube members.
This video shows my test results for a simple design of the Perpetual Motion Holder (PMH). I am using one coil one layer thick of 14awg magnet wire.
This is only to prove that the PMH can be made using one coil, one layer thick. Further experiments could use fewer wrappings, lower voltage, smaller gauge wire, or even single/multiple pancake coils.
Thanks for watching, RussellLaser EPG 017 - Specific-Gas Processor Design using Spectrum Tubes as the Photon SourceLimitless Research2013-01-02 | Inspired by Stanley Meyer, RWG Research, & many other YouTube members. This is the seventeenth video of many to come. I will be focusing my efforts on building a Laser Electrical Partial Generator (EPG) similar to the one Stanley Meyer talks about in the New Zealand lecture video.
Happy New Year everyone!!! This video is a sneak peek of my new design for specific gas processing. I will be creating 3 of these gas processors, one using Argon spectrum tubes, one using Helium spectrum tubes, and a combined version using Oxygen and Nitrogen spectrum tubes for processing ambient air. I may add some type of mirrors to reflect the photons toward the center of the device. The power source for the spectrum tubes will be AC and the source for stripping the electrons will be pulsed DC. The negative leads being the 4 steel bolts and the positive lead will be a 28g stainless steel wire suspended through the center.
Once I have completed assembly I will follow up with an assembly video. I just wanted to give you a quick look at what I'm doing and say Happy New Year.
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellLaser EPG 016 - Electron Spin of Nitrogen, Oxygen, Hydrogen, & CobaltLimitless Research2012-10-24 | Inspired by Stanley Meyer, RWG Research, & many other YouTube members. This is the sixteenth video of many to come. I will be focusing my efforts on building a Laser EPG similar to the one Stanley Meyer talks about in the New Zealand lecture video.
This video focuses on the electron spin of some very familiar elements (H, O, & N). We can easily obtain them from ambient air and run them through the gas processor to form ions with a charge, then run them through the EPG to see what happens. Hopefully we will pick something up in the pickup coils.
I am looking forward to seeing results from these gases, first as ions flowing from the gas processor through the EPG, then as a mixture with cobalt nanoparticals. Maybe the gas ions alone will be enough to cause a magnetic field we are able to pick up and use on a vehical where there is constant gas processing going on (gas ions being produced).
Since I have all the equipment for using helium and argon I will be testing those as well, but when using noble gases we will only be using the magnetism of the metal particals, not the gas ions. This should lead to some interesting results.
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellLaser EPG 014 - Finished Magnetizing Chamber & New Direction of the Magnetic Gas ProcessorLimitless Research2012-08-19 | Inspired by Stanley Meyer, RWG Research, & many other YouTube members. This is the fourteenth video of many to come. I will be focusing my efforts on building a Laser EPG similar to the one Stanley Meyer talks about in the New Zealand lecture video.
This video focuses on the finished magnetic chamber, results of magnetic field strength it produces, and the new direction my research is taking me. I will be redesigning the magnetic gas processor (all 3 chambers), which should improve the magnetic gas production. I also throw a few new ideas at you.
Supporting Research:
Photon absorption and emission spectra (Figure 4 & 5): http://m.everythingscience.co.za/grade-12/16-optical-phenomena-and-properties-of-matter/16-optical-phenomena-and-properties-of-matter-04.cnxmlplus
Wavelengths & Intensities specific to Helium: http://astro.u-strasbg.fr/~koppen/discharge/helium.txt
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching, RussellLaser EPG 013 - Other Thoughts & Ideas (Possible Redesigns)Limitless Research2012-08-15 | Inspired by Stanley Meyer, RWG Research, & many other YouTube members. This is the thirteenth video of many to come. I will be focusing my efforts on building a Laser Electrical Partial Generator (EPG) similar to the one Stanley Meyer talks about in the New Zealand lecture video.
This video focuses on a few different possibilities for redesigning the chambers I have already made. These are just some thoughts that came up during the development process of the chambers. Take these for what they are, just thoughts and ideas. They are simply meant to inspire people to look into different ways of doing things.
Please leave your comments & suggestions, they are welcomed.
Thanks for watching, RussellLaser EPG 012 - Magnetizing ChamberLimitless Research2012-08-15 | Inspired by Stanley Meyer, RWG Research, & many other YouTube members. This is the twelfth video of many to come. I will be focusing my efforts on building a Laser EPG similar to the one Stanley Meyer talks about in the New Zealand lecture video.
This video focuses on the progress of the Magnetizing Chamber build at this point. There are 3 electromagnets; one inside the other using 30AWG enamel coated copper wire. The smallest having approximately 1100 turns, medium 1500, and the largest having 3000 turns. They are all wrapped the same direction. When they are all connected together the electricity will flow in the same direction on all 3 coils. The outer 2 electromagnets will strengthen the field formed in the center tube to form one strong field that will help magnetize the metallic gas. The magnetic field will be pulsed to attract then release the metallic gas and to help keep the coils cool. Still some work to be done, but it's getting close to test time. Ideas taken from the magnets in this video. http://www.youtube.com/watch?v=QGytW_C6hR8&list=FL1ovyCoLfxAyfu_DCpKRTCg&index=9&feature=plpp_video
Please leave your comments and suggestions, they are welcomed.