How to Make a Mini Awl using Power Tools- Woodworking and Craft Tool Project The Wood Yogi 2020-04-15 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Here is a really handy mini tool for woodworking or for many other crafts. It is an easy project that requires basic skill using hand tools only. These small sized awl's are fantastic for delicate work, but also very useful for marking or piercing in general. A great little project for the power tool woodworker and they make superb gifts.Any scrap piece of hardwood works as a good handle and this can be shaped to whatever design you like. I use a small hardened masonry nail for the spike / pin and fix it in using 2 part epoxy, but I'm sure other glues would work well with a bit of experimentation. Make sure to drill the hole for the spike before you shape the handle. I finish the wooden handle using linseed oil.For those that like to use hand tools, I have another video making the same sized awl using hand tools only - youtu.be/6o_--3oD9TwI like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.NamasteChris ॐ
Minimalist Wooden Clock - 2021 Clock Challenge The Wood Yogi 2021-01-14 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓NamasteHere is my entry to the #JanuaryClockChallenge2021 that was started by Huw at Wooden it be Nice youtube.com/channel/UCEhdXLwwzK979Zdwuj3x6gAI made this simple clock from a piece of Spalted Horse Chestnut and mounted a basic silent electronic movement in it.This project also gave me the first chance to test my homemade jointer and to re-saw a beautiful book matched set to be used later as a bottom or top for a musical instrument. To watch other videos in the challenge, please check this playlist: youtu.be/xFaYxDfjZXII like the idea of DIY and making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It helps to support My Channel so that I can create new content on a regular basis.If you are looking to buy clock movements for your future projects, then please consider using my affiliate links below. I receive a small percentage of any sale and it helps my channel.Quartz Clock Silent Movement Kitbanggood.com/custlink/Gv3YSyu3qeAtomic Radio Controlled Silent Clock Movementbanggood.com/custlink/D3Kh8RfK22Music in this video by The Wood YogiFirst Track: A Positive DirectionSecond Track: Into the BlissChris ॐ
Simple Drill Bit Guide - DIY Woodworking Tool Hack - 3D Printer The Wood Yogi 2020-12-17 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓NamasteThis is simple method for guiding a drill bit while drilling 90 degrees or a right angle to a surface. I have been using inexpensive metal fixing brackets as a guide for some time and thought it might be useful to share. I also recently designed a simple drill bit guide for making using a 3D printer. The 3D printed component works really well and seems to be holding up to the job, but I decided to fix the metal brackets to the 3D printed component to create a more stable and durable drill bit guide. I used 2 part epoxy to fix the parts together. The 3D printed part could easily be replaced with wood or a similar material to form a handle for the brackets.If you are interested in the 3D printed guide, it can be found on Thingiverse Here: tinyurl.com/yaav2jtjI like the idea of DIY and making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It helps to support My Channel so that I can create new content on a regular basis.Chris ॐ
Random Orbital Sander DIY Replacement Pad Hack The Wood Yogi 2020-12-07 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓NamasteI needed to replace the sticking pad on my Random Orbit Sander as the old one would no longer hold sanding disks. It is difficult for me to find these parts locally and they are expensive when I do. I did manage to find one, but I saw the opportunity to experiment with a cheap pad that is designed for using with an angle grinder and only cost 2 Euros. I figured I could salvage parts from the old component and come up with a DIY option. I am happy with the end result and it was not too difficult to make.If you have any questions, leave a comment below and I will try to answer them.I like the idea of DIY and making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It helps to support My Channel so that I can create new content on a regular basis.Chris ॐ
Awesome New Tools for Woodworking or DIY - Banggood Review The Wood Yogi 2020-11-10 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Banggood sent me these Marking Tools to test out and to show to my Subscribers.If you like any of the Tools in this review and are interested in buying some for yourself then please use my Banggood affiliate links below. As an affiliate, I will enjoy a small return for any purchases made via this link and it also helps me to provide future reviews of products.Drillpro Multifunction Inch and MM Woodworking Scriber Gauge Aluminum Steel Measuring Marking Framing Ruler Tool for Carpentrybanggood.com/custlink/vGKRVW9VmzCode: BGYouw02Coupon price: $21.99Drillpro 300/400mm Adjustable Angle Woodworking T Ruler Hole Positioning Crossed Marking Gauge Scriber Measuring Tool - 400mm banggood.com/custlink/Dm3YFJZHvCCode: BGYouw03Coupon price: 18%offBlue Aluminum Alloy 90 Degrees Height Ruler Metric Inch Woodworking Triangular Rulerbanggood.com/custlink/DDvE5CZPD0Code: BGYouw04Coupon price: $19.99IP65 Waterproof 0.1° 360 Degree Large LCD Digital Protractor Inclinometer Magnetic Electronic Angle Level Boxbanggood.com/custlink/vG3RtJIF3nCode: BGYouw05Coupon price: $19.99My impression of these Tools are that they are of excellent build quality and precise. I like all the Tools in this review and in particular the Multifunction Tool for its versatility. The contrast of Black and White Markings make it really clear for me to view and work with and I think it is a great tool for DIY jobs due to its size.These Tools are advertised mostly for Woodworking, but they could be very useful in many DIY and craft applications. I would not limit any of these tools to Woodworking, but they are well suited for that purpose.If you are a maker, Banggood have a lot more awesome products that might interest you!banggood.com/custlink/G3KvsptGM1Please note: I get a lot of requests to make product reviews and I always state that I will only create a video of a product that I think is of a good quality and value. Products that I do not find to fit this requirement do not get reviewed. I value my subscribers and only want to provide the best information I can. I try to be conscious of what could be useful to others during my reviews and if you need further information then please comment below or contact me. I understand how the purchase of products are important, especially for anyone on a limited budget.If you like what I do, then please Subscribe, Like and Share my Videos.It really helps to support My Channel and to help create new content on a regular basis.NamasteChris ॐ
DIY Duel Action Double Bar Scissor Panel Clamps for Woodworking - Handmade Tool The Wood Yogi 2020-10-27 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓NamasteI really like this style of clamp and wanted to share the method I use to make them. It requires a bit of welding to make the clamping mechanism.The clamping mechanism is made by welding 12mm nuts to opposite sides of a 14mm coupling. The 12mm nuts hold short lengths of 12mm threaded rod to hold metal bars and act as a hinge. A longer 14mm threaded rod is used to apply force to the workpiece by tightening it using a socket in a drill. The stop end of the clamp is similar only it has a stop block instead of a clamping mechanism. The stop block is as high as the clamping mechanism nuts and as wide as the top wooden bar of the clamp. It is 2.5 times longer than the width. There is a 12mm hole drilled near the beck to receive a 12mm threaded rod. The clamp wooden bars are made of reclaimed pine and have holes drilled at 10cm intervals.Link to the Dowel Jig Videoyoutu.be/-9w-qanDaaEAffiliate link to purchase Dowel Jig Setbanggood.com/custlink/DK3Kb8AL64I like the idea of DIY and making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It helps to support My Channel so that I can create new content on a regular basis.Chris ॐ
How I make Simple Shelves for the Kitchen - Woodworking - Reclaimed Wood Project The Wood Yogi 2020-09-19 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓This is one method that I have been making shelves with for many years. It is simple and the shelf is really strong. Most of the pressure is in a downward force onto the brackets, so holding the the shelves by using screws from the back is easily enough.I hope the video shows the process clearly as it can be easily adapted to different dimensions of both the shelf and materials.I often get asked about my favourite small wooden hand plane that I use in my videos, so here is a link. Also, if you purchase using this link I received a small commission that is really helpful to me.Small wooden hand plane: banggood.com/custlink/vmDRJcFH5UIt is the smallest of the 3 hand planes displayed. I have not tried the larger ones, but I plan to in the future and I'm sure they would work well after setting up.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.NamasteChris ॐ
How I Make Simple Sauna Duckboards from Reclaimed Wood - Woodworking Project The Wood Yogi 2020-09-11 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓ NamasteHere is a great woodworking beginner project. I used reclaimed scraps of Pine to make these Sauna mats / duckboards. There are no set dimensions as the method works for seats or mats of all sizes. They are made by cutting similar size strips of wood and fixing them together by threading paracord through matching drilled holes for each piece.Sauna Duckboards are used as a personal sitting surface in steam rooms or cabinets or most types of Sauna and can be stored away after use. The style I make in this video makes them easy to roll up for transport.We use steam baths and saunas regularly as a form of therapy and especially for cleansing and to assist in detoxification.I don't use any finish on the mats and simply wipe them down after each session before hanging to dry.If you like what I do, then please Subscribe, Like and Share my Videos. It helps to support My Channel so that I can create new content on a regular basis.Chris ॐ
Fanttik NEX L1 PRO - New Electric Screwdriver Review The Wood Yogi 2020-09-07 | --- Details in the description below --- Subscribe --- Like --- Share ---This is my review of Fanttik's newest screwdriver the Fanttik Nex L1 ProOne of the worlds first smart-control electric cordless screwdrivers.The screwdriver has a list of features and I wanted to test if it can perform as described. It easily past all the tasks I set for it and I am very impressed by this tool.I forgot to mention in the video that this screwdriver is really comfortable to hold and work with for me.The screwdriver is on offer as part of a promotion on Indigogo and if you are interested in purchasing one, here is the link: tinyurl.com/y47thth9The case is well designed and very neat to store.The screwdriver has a digital display to show the direction, power and battery level.It has a 3rd generation magneto rare earth motor with variable speed from 0-220rmp with electronic break .The smart torque control has 6 settings between 0.5N.m and 6N.m and is set by pressing a button to select the desired level from 6 settingsForward and reverse is easily selected by pressing a button at the rear and I really like this feature.It has a 18650 2000mAh battery and is charged by connecting a USB C cable. This makes it easy to charge from various adapters and while on the move.The manual says that the screwdriver can drive up to 260 3.5 screws on a single charge on White Pine. I managed to drive 311 screws. I began with 32mm screws and including many 45mm long as I ran out of 32mm. I stopped as I had other things to do, but the screwdriver still had power left to carry on.I next tried the torque settings by using 75mm size 5 screws and as can be seen in the video, it works very well.The screwdriver has a 360 degree ring light and includes 13 bits and an extension. A USB C type cable is included also. I managed to charge the screwdriver in around 1 hour 10 minutes, but it still had power left when I started the charging.The Shark Chuck is described as 'shark drill lock design' This mechanism prevents the bit from coming loose or falling out. I like this feature even more than magnetic types.I've been asked not to compare it with other brands, as to cause a misunderstanding for viewers.I like the idea of reviewing Tools and other products, especially if it is a Tool that is not easily found or readily available in some countries. If you have a product that you would like me to review then please contact me to arrange it.0:00 Video description0:37 Unboxing and Intro1:58 Test one7:44 Test two10:30 General use and specificationIf you like what I do, then please Subscribe, Like and Share my Videos.Music: A Positive Direction by The Wood YogiNamasteChris ॐ
Making a Simple Caulk Tube Holder / Storage Rack - Woodworking Project The Wood Yogi 2020-09-07 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓How to make a Simple Caulk Tube Holder / RackI like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.NamasteChris ॐ
Making Simple Garden Ornaments - Woodworking and Craft Project The Wood Yogi 2020-08-19 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓I found this idea in a book that I borrowed from a Library and wanted to use it. This is one of the easiest woodworking projects to try. I cut out profiles of birds and drew some silhouettes from prints onto scraps of Pine wood.My Wife and Son painted designs on them and they are simply nailed to fences and raised beds around the garden to add some decoration.I think they are a cheerful touch to the garden. The only problem is that some of the birds have gone missing and other have been damaged. I wonder who it could have been 😁I like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.NamasteChris ॐ
How to Make a Mug Tree - Cup Holder - Woodturning / Woodworking Project The Wood Yogi 2020-08-12 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Here I make a simple Mug Tree / Cup Holder. I often don't begin with a design because I like to see how the wood will dictate the finished project. I do usually have an idea of the what I want to create in my mind to start with.This project was made from reclaimed or scrap wood and could be an easy thing to make for beginners to woodturning and woodwork.I like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.NamasteChris ॐ
A Small Pot - My Attempt at - SPSWC2020 @Sumos Projects Scrap Wood Challenge 2020 The Wood Yogi 2020-08-07 | ↓↓↓ Details below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓#spswc2020 #scrapwoodchallenge2020 #woodturningThis small Pot made from a Scrap block of Pine is what I came up with for Sumo's Scrap Wood Challenge 2020. It was simple, fun and quick to make and gave me a chance to start doing some more woodturning. Sumo's Projects Scrap Wood Challenge 2020 // spswc2020I like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.NamasteChris ॐ
Making a Knife for a Marking Tool - Woodworking The Wood Yogi 2020-08-03 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓I made a video to review this new woodworking marking tool recently and I wondered if it could hold a blade or knife for scribing. Some of my subscribers commented about similar ideas, so I decided to make a simple one to test if it would work.This is what I came up with. I woodturned a 7mm spindle from Hard Maple and shaped a small Marking Knife from a piece of old Bandsaw Blade.The Tube that holds a Pencil has a good tight grip on the knife spindle, but when mounted in the Marking Tool holder it is Spring Loaded and has the possibility to move, although this didn't seem to be a problem and the idea worked well.I will experiment at a later time with different shape and length of Knives to try and fine tune the idea. At the least I managed to make a nice and small Marking Knife to add to my Tools. The original review video of the Marking Tool is here:youtu.be/hhrhwYQqj2IIf you like the tool and are interested in buying one for yourself then please use my Banggood affiliate link below. As an affiliate, I will enjoy a small return for any purchases made via this link.Woodworking Straight Line Linear Arc Scriber Toolbanggood.com/custlink/3GDEpdoCbMFor a discount, use this Code: BGwood05SIf you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.NamasteChris ॐ
Bring New Life to Old Countersink Bits - Tool Sharpening Hack - Tip The Wood Yogi 2020-08-02 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓From time to time I sharpen Countersink Bits using this technique. My tools are used on a daily basis and suffer a fair amount of wear due to heavy work. and need to be ready for future projects. If I notice that they are not cutting well it's usually because of damage or the edge becoming dull after a period of work.This method works really well for me and I am still using the same set of Countersink Bits on almost a daily basis after many years.I hope this Tip / Hack is useful to people involved in woodworking and metalworking and if you have further suggestions or ideas for this tip then pleas comment below.I like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.NamasteChris ॐ
Linear Arc Scriber - New Woodworking Tool - Banggood Review The Wood Yogi 2020-07-27 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓This Marking Tool is a new product at Banggood and they asked me to test it out and show it to my Subscribers.If you like the tool and are interested in buying one for yourself then please use my Banggood affiliate link below. As an affiliate, I will enjoy a small return for any purchases made via this link.Woodworking Straight Line Linear Arc Scriber Toolbanggood.com/custlink/3GDEpdoCbMFor a discount, use this Code: BGwood05SMy impression of the tool is that it is of excellent quality and precise. It works as described for marking as I have demonstrated in the video and I can recommend it if you are looking for a tool that is similar.If you are a maker, Banggood have a lot of awesome products that might interest you and are currently having a sale on tools!Use the code BGwood01S for 18% off on all woodworking tools at this link.banggood.com/custlink/3KDyCRE0sIThis tool will make a great addition to my marking gauges and I will find many uses for it in the future. I f you have any ideas for using this tool other than I have demonstrated in the video, then please leave a comment below.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.NamasteChris ॐ
How to Make a Rustic Coat Hanger Shelf - Woodworking and Woodturning Project The Wood Yogi 2020-07-24 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓We needed a quick, cheap and simple coat hanger with a shelf for the entrance to our house and this is what I came up with.I use two pieces of reclaimed softwood for the back and top and a couple of branches from a Linden Tree to make the pegs / hooks.The dimensions are not critical and can be adapted to suit your needs and space.I hope it inspired some of you to create something similar as it is a really nice and easy project for those beginneing and experienced in woodworking.I like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.I have many videos of great projects and ideas similar to this and they can be found by looking back through my previous videos.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.NamasteChris ॐ
Wobble / Balance Board for Sport or Rehabilitation - Woodworking and Woodturning Project The Wood Yogi 2020-07-23 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓In this video I make a Wobble or Balance Board by woodturning a half sphere then fitting it to a 12mm Plywood Disc. The dimension are not critical and can be experimented with to create a suitable size and height for your needs.A Wobble / Balance Board is used to improve proprioception following injury and to help create a sense of awareness and education to a body part in reducing the risk of future injury. It can also help to develop functional strength and stability in movement.They are good for Rehabilitation exercise and also great to simply have fun using (for me anyway)I like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.NamasteChris ॐ
Flex Shaft - Rotary Tool - Banggood Review - Woodworking - Jewellery Making The Wood Yogi 2020-07-22 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Banggood sent me this tool to test out and to show to my Subscribers.If you are interested in buying any of the equipment reviewed in this video then please use my Banggood affiliate links below. As an affiliate, I will enjoy a small return for any purchases made via these links.Flex Shaft Motorbanggood.com/custlink/KKmhB86GIoI found this Flex Shaft Motor to be very well made and on a different level compared to any of my smaller Rotary Tools and I really like the extra power and the convenience of quick change handpieces and foot speed controller. This Tool is useful for many different applications, including woodwork, metalwork, carving in various material and Jewellery Making.Drillpro Woodworking Carving Chisel with 5 Bladesbanggood.com/custlink/mKGEpDSE2jFor a discount, use this Code: BGwood02S1000mm Electric Grinder Flexible Shaft (Not compatible with the Flex Shaft Motor in this Video although it is good quality)banggood.com/custlink/G3DRJD9YkgFor a discount, use this Code: BGwood02S2.35mm Shank Rotary Quick Change Handpiece Suit FOREDOM Flexible Shaftbanggood.com/custlink/GD3hpviRkQFor a discount, use this Code: BGwood02SDrillpro RB29 5pcs 1/4 Inch Shank 10mm Tungsten Carbide Burr Setbanggood.com/custlink/mGDEpGidUMFor a discount, use this Code: BGwood02SIf you are a maker, Banggood have a lot of awesome products that might interest you and are currently having a sale on tools!Use the code BGwood01S for 18% off on all woodworking tools at this link.banggood.com/custlink/3KDyCRE0sIIf you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐChris ॐ
Sumos Projects - Scrap Wood Challenge 2020 The Wood Yogi 2020-07-20 | ↓↓↓ Details Here ↓↓↓#spswc2020 #scrapwoodchallenge2020 #makersyoutu.be/qcyxUMNEYfcThis is a challenge & Invitation I'm sending out to all YouTube content creators. Its going to be a fun challenge and I hope to see as many cool Makers out to make something excellent.Prizes for Australian and International Makers.Please put the name of your build into the thumbnail and Sumo's Projects Scrap Wood Challenge 2020 // spswc2020 in the description on your video.Spread the news of this #spswc2020 with your fellow Makers and communities.If you don't have a YouTube Channel, Why not start one. This could be your first video and there are prizes to be won.The rules for the challenge are,A/ Make anything you want be it furniture, jig/B/ Explain clearly to the audience what you are makingC/ Video no longer than 3 minutesD/ End result of build should be funtionalE/ Have FunF Have more FunFacebookfacebook.com/SumosprojectsInstagraminstagram.com/?hl=enI like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.NamasteChris ॐ
Moxibustion Stick Extinguisher - Moxa Snuffer - Woodturning Project The Wood Yogi 2020-07-16 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓In this video I show how I make a Moxa Stick Snuffer / ExtinguisherThe information in the video is for educational and entertainment purposes only.Moxibustion is a complex and fascinating subject with a long history of use in TCM Tradition Chinese Medicine.If you are interested in the subject of Moxibustion then I suggest further self study.I have been using methods of Moxibustion for over 40 years and as a therapist I find its use for various problems very helpful. A common method is to use a Mugwort Stick also called a Moxa Pole or Cigar. There are many types that can be purchased but I prefer to make my own, as I show during the video.The extinguisher is simply made from Hard Maple on the lathe with a 20mm wide hole 5cm deep.I like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.NamasteChris ॐ
Making Simple Concrete Weights for Makers The Wood Yogi 2020-07-14 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓I decided to make simple weights from left over mixed concrete instead of wasting or dumping it. These are simply cast in a pot using a plastic bag so they are easy to remove. The handles are made from scrap rebar or insulated cable. They come in very handy for many types of work and a great tool to include for other hobbies or crafts.The music in this video is composed by myself and is free to download and use in creating you videos.Music by The Wood YogiDisco Go FriscoCheck my playlist of free music here youtube.com/playlist?list=PL_V_eUGW5WCnM6XUydf97CJicO2sA6YoO I like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.NamasteChris ॐ
Making Wooden Knobs for a Blanket Chest - Woodturning and Woodworking Furniture Restoration Project The Wood Yogi 2020-07-13 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓I saw this Blanket Chest for 8 Euros and had to buy it. It is full of character, but had no Drawer knobs. Of course I didn't mind this as it gave me the opportunity to add something of my own to it. I don't know how old it is, but as you can see from the joinery and especially the dovetails, it was built to be a functional piece of furniture with a beautiful exterior. I have an idea that the Drawers are veneered with book matched figured Birch because the Chest is Sweden originally and Birch would have been a common choice for this style of work. I selected Hard Maple to make the Knobs as it will darken to a close match over time and is very durable for regular use.Music by The Wood YogiInto the BlissA Positive DirectionFor more free music check my playlist here: youtube.com/playlist?list=PL_V_eUGW5WCnM6XUydf97CJicO2sA6YoOI like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It helps to support My ChannelNamasteChris ॐ
How to Make a Mini Awl - Woodworking and Craft Hand Made Tool The Wood Yogi 2020-04-15 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓ Here is a really handy mini tool for woodworking or for many other crafts. It is an easy project that requires basic skill using hand tools only. These small sized awl's are fantastic for delicate work, but also very useful for marking or piercing in general. A great little project for the beginner to woodworking and they make superb gifts.Any scrap piece of hardwood works as a good handle and this can be shaped to whatever design you like. I use a small hardened masonry nail for the spike / pin and fix it in using 2 part epoxy, but I'm sure other glues would work well with a bit of experimentation. Make sure to drill the hole for the spike before you shape the handle. I finish the wooden handle using linseed oil. For those that like to use power tools, I have another video making the same sized awl using power tools - youtu.be/xH4oOWnJzBkI like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience. If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis. NamasteChris ॐ
Making a Simple Lathe Tool Holder - Woodworking Project - Chisel Rack The Wood Yogi 2020-04-05 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓ I needed a Simple Tool Holder for my most commonly used Chisels. This was my solution. A Chisel Rack in close reach of the Lathe.This project could be easily adapted to suit other purposes and great for a beginner to woodworking. Music:Anahata by The Wood YogiI like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience. If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis. NamasteChris ॐ
Toy Train Wheel Repair - Essential Woodworking Project - Woodturning a replacement part The Wood Yogi 2020-03-31 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓ I can't think of a better reason for learning woodwork other than being able to fix up old toys in hurry :)I hope the video speaks for itself :)This was an essential project, as it brought instant relief to a disastrous situation. A Broken Wooden Toy.My son inherited this old wooden train and puts it through it's paces. It maybe collectable, but he uses it for what it was made for. I intentionally left the new wheel an odd colour from the rest to remember the repair process in the future. It has a story that can be past on, or maybe leave the future owner guessing about it.I like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience. If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis. Namaste ॐ
Harvesting Instrument Parts from Old Wood - Luthiery - Woodworking The Wood Yogi 2020-03-30 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓ ** Firstly ** Visit Mark McCluneys channel here: youtube.com/channel/UColhYw40OaGj5gNYBc496OAMark is the reason I am focusing on luthiery once again and I thank him so much for inspiring and communicating with me regularly. I have built a lot of musical instruments over the years, but took a break from it for a long while. I inherited a few of my Dad's old tools and began to work with wood once again and of course planned to pick up instrument making from the point I left it. I'm interested in all forms of sound making objects, but mostly acoustic and folk instruments. I believe Mark is a great instrument builder and creates fantastic pieces with whatever material he has available. He also has a brilliant sense of humour that always brings a smile to all that follow his projects. Make sure to subscribe to his channel :)--------In the first part of this video, I was splitting wood during the winter. It was around -20C and I needed to process firewood at the same time. The wood I am saving is more than 200 years old. Mostly Spruce beams and Floorboards. This is my way of recycling and re-purposing such good material in order to harvest parts for musical instrument building. At that time I was looking for pieces to make soundboards and tops from. I had already split many large pieces and what you see is a small selection for smaller instruments.The next section of the video was filmed a few days ago as I prepared brace material for future acoustic instruments. The wood has hundreds of growth rings per inch. Something that is rare to find today. It is well seasoned (more than 200 years) You may be able to detect from the sound in the video that the wood has a great tonal quality and is very light and strong still. Modern methods of torrefaction are used to replicate aged wood to a similar state of the material I am salvaging and I hope to use the wood to build many nice instruments in the future.I created a lot of stock material form this reclaimed timber and I will show how I store and use it in future videos.I plan to create many future videos on this subject along with instrument builds that may be followed for those interested. I need to build a Mountain Dulcimer for myself and will try to film the entire process as one of the first instruments I make.If you would like to see something specific to this subject then please comment below. I think this is going to be a fun journey :)I like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience. If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis. NamasteChris ॐ
Woodturning - Finishing a Horse Chestnut Platter - Wood Lathe Project The Wood Yogi 2020-03-25 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Ring the Bell Icon↓↓↓ In this video, I finish a platter made from Horse Chestnut. It is a piece that I rough turned a year before. It is well dried and the I completed it using a 1/2" Bowl Gouge.I coated the platter with Linseed Oil and finished using a Spray VarnishMusic:Ajna by The Wood YogiI like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience. If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis. Namaste ॐ
How to Make a Toy Wooden Microphone - Woodworking / Woodturning Project The Wood Yogi 2020-03-03 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓ I made this little project over a year ago and finally found the time to edit and upload it. My son was 3 years old and wanted a microphone to sing along to.This is a simple build for a woodturner. A handsaw could be used to create the mess pattern on the top instead of a bandsaw. A woodworker could also create this toy with the use of a spokeshave and chisel after a little imagination.I drilled a hole in the base and inserted a length of string fixing it with hot glue.A pipe fitting on the top of a brush pole makes a fantastic microphone holder and a simple base completes the stand.I like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience. If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis. Namaste ॐ
How to Make an Articulated Sanding Block - Easier way to sand dry wall - Sanding Pad Tool The Wood Yogi 2020-02-29 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓ After a lot of wall and ceiling plastering, I needed to sand a lot of walls and looked to find a sanding block that would make the work easier, but I could not find anything locally, so decided to adapt a cheap sanding block to do the job.I also wanted to be able to use the tool while standing on the floor and made it to be used with an extending pole / handle.I used a cheap abrasive sand paper block / holder that I bought locally, but I think the technique or method demonstrated in the video could easily be used to adapt other styles of sanding blocks and possibly with a wooden shop made one.The result was excellent and it works extremely well. It made the job of finishing the dry wall plastering much easier.I hope the idea is useful to people living in regions that do not have easy access to such tools.I like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience. If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis. Namaste ॐ
Chippy Dance - Royalty Free Music for use in YouTube Videos - Makers Music The Wood Yogi 2020-01-13 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Free Music for Commercial UseNo copyright claims on my royalty free music! You may use my music in your YouTube videos if you provide credit.I am offering my music copyright free to YouTubers because I think it will benefit creators in making great content and provide new music to make their YouTube videos that much better.I like to make music to help create different atmospheres :)My music is mostly intended as non copyrighted music for YouTube content, but it can easily be used as inspirational music, relaxation music, motivational music, meditation music, workout music, gym music, gaming music, vlogging music (vlog music), or even party music.© If you use this track in a video (YouTube/Facebook/Instagram), please provide a link to this video and include the following in your description/comments/caption:Music provided by The Wood Yogi:The Wood Yogi - Chippy DanceCheck out my Royalty Free Music Playlist:tinyurl.com/ybav3jdsDownload on SoundCloud:tinyurl.com/wlgmsl2© If you use this track on stream (Twitch/YouTube/Mixer), please provide on-screen credit and/or link to my channel in the description panel.If you're a corporate entity looking to license my music for TV/film/advertising/or video game please contact me.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
Dowelling Jig - Aluminium / Alloy 08450 Woodworking Tool - Banggood Review The Wood Yogi 2020-01-09 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Banggood sent me the 08450 Dowelling Jig tool to test out and to show to my Subscribers.If you like the tool and are interested in buying one for yourself then please use my Banggood affiliate link below. As an affiliate, I will enjoy a small return for any purchases made via this link.08450 Aluminum Dowelling Jig Setbanggood.com/custlink/DK3Kb8AL64My impression of the tool is that it is of excellent build quality and precise. It is simple and quick to set up and use.I have had this Jig for a while and I love it. It makes work really easy for me.The Jig comes as a set to use with 6mm, 8mm and 10mm Dowels. It is heavy and solid and extremely accurate.The Jig enables the construction of edge to edge and end to end joinery and the ability to accurately join pieces of work in an L or T configuration.The Jig also has the capability to make Knock Down style Furniture using the Furniture Fitting Cabinet Connectors which is a Cam System Housing Connector.All components are made of high quality materials, mostly Aluminium / Alloy and the Dowel Bushings are made of hardened steel.The Jig is very easy to set up and has provided me with repeatable accurate joinery when I have used it.I will be using this Dowel Jig for many future projects, some of which I have already started and very happy with the results.For a beginner to woodworking, I would say the Jig is a great addition if complex joinery seems daunting.If you are a maker, Banggood have a lot of awesome products that might interest you!banggood.com/custlink/G3KvsptGM1banggood.com/custlink/vGmGQJtvUqIf you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
Custom Handmade Headphone Stand - Woodworking Project - How to Make The Wood Yogi 2020-01-08 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓ I recently watched Karl from karlpopewoodcraft make a Headphone stand for his Son and decided it was time for me to make one of my own. Long overdue.Karl's video:youtu.be/1U6mgtZv7P4Check out Karl's channel. He makes a lot of great projects :) This is a great project for anyone beginning woodwork. There are many ways and designs to make Stands for Headphones and they make a perfect gift for someone that loves to listen to music.I made mine from Alder Wood and finished it using Linseed Oil. My Wife added a design using Pyrography.Music by me, The Wood Yogi:The Way to BlissChippy DanceMost of my music is free to download and use in the production of your own media and can be found by checking the playlist here:youtube.com/playlist?list=PL_V_eUGW5WCnM6XUydf97CJicO2sA6YoOI like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience. If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis. Namaste ॐ
A Serious Thing - Royalty Free Music for use in YouTube Videos - Makers Music The Wood Yogi 2020-01-06 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Free Music for Commercial UseNo copyright claims on my royalty free music! You may use my music in your YouTube videos if you provide credit.I am offering my music copyright free to YouTubers because I think it will benefit creators in making great content and provide new music to make their YouTube videos that much better.I like to make music to help create different atmospheres :)My music is mostly intended as non copyrighted music for YouTube content, but it can easily be used as inspirational music, relaxation music, motivational music, meditation music, workout music, gym music, gaming music, vlogging music (vlog music), or even party music.© If you use this track in a video (YouTube/Facebook/Instagram), please provide a link to this video and include the following in your description/comments/caption:Music provided by The Wood Yogi:The Wood Yogi - A Serious ThingCheck out my Royalty Free Music Playlist:tinyurl.com/ybav3jdsDownload on SoundCloud:tinyurl.com/yjkj8wxb© If you use this track on stream (Twitch/YouTube/Mixer), please provide on-screen credit and/or link to my channel in the description panel.If you're a corporate entity looking to license my music for TV/film/advertising/or video game please contact me.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
Dulcimer Lullaby - Royalty Free Music for use in YouTube Videos - Makers Music The Wood Yogi 2020-01-01 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Free Music for Commercial UseNo copyright claims on my royalty free music! You may use my music in your YouTube videos if you provide credit.I am offering my music copyright free to YouTubers because I think it will benefit creators in making great content and provide new music to make their YouTube videos that much better.I like to make music to help create different atmospheres :)My music is mostly intended as non copyrighted music for YouTube content, but it can easily be used as inspirational music, relaxation music, motivational music, meditation music, workout music, gym music, gaming music, vlogging music (vlog music), or even party music.© If you use this track in a video (YouTube/Facebook/Instagram), please provide a link to this video and include the following in your description/comments/caption:Music provided by The Wood Yogi:The Wood Yogi - Dulcimer LullabyCheck out my Royalty Free Music Playlist:tinyurl.com/ybav3jdsDownload on SoundCloud:tinyurl.com/tbvy5v2© If you use this track on stream (Twitch/YouTube/Mixer), please provide on-screen credit and/or link to my channel in the description panel.If you're a corporate entity looking to license my music for TV/film/advertising/or video game please contact me.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
How to Make aClown Coat Hanger for a Child / Hook or Rail - Woodturning - Woodworking Project The Wood Yogi 2019-12-29 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓As part of our ongoing house renovation, my Wife asked me to make a hanger for our son to put his coat, bags and other things. As usual, I didn't have a plan or sketch, but I did have an idea to create something with clowns.I think the process should be easily understood from watching the video, but if you have any questions then please comment below. I will be happy to answer :)I made the coat hanger project from reclaimed wood and designed it as I went along.My Wife painted the clowns to help with the build and our Son loves it.I thing the idea of creating a character based clothes hanger / hook or rail has a lot of potential and I will experiment with more designs in future videosI have a similar woodturning project of making hedgehogs and it can be watched here:youtu.be/7uBorBdENHoI like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
A Victorious Soul - Royalty Free Music for use in YouTube Videos - Makers Music The Wood Yogi 2019-12-28 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Free Music for Commercial UseNo copyright claims on my royalty free music! You may use my music in your YouTube videos if you provide credit.I am offering my music copyright free to YouTubers because I think it will benefit creators in making great content and provide new music to make their YouTube videos that much better.I like to make music to help create different atmospheres :)My music is mostly intended as non copyrighted music for YouTube content, but it can easily be used as inspirational music, relaxation music, motivational music, meditation music, workout music, gym music, gaming music, vlogging music (vlog music), or even party music.© If you use this track in a video (YouTube/Facebook/Instagram), please provide a link to this video and include the following in your description/comments/caption:Music provided by The Wood Yogi:The Wood Yogi - A Victorious SoulCheck out my Royalty Free Music Playlist:tinyurl.com/ybav3jdsDownload on SoundCloud:tinyurl.com/s8qfgnq© If you use this track on stream (Twitch/YouTube/Mixer), please provide on-screen credit and/or link to my channel in the description panel.If you're a corporate entity looking to license my music for TV/film/advertising/or video game please contact me.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
5V USB Heated Vest / Jacket - Banggood Review The Wood Yogi 2019-12-27 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓ Banggood sent me this Heated Vest to test out and to show to my Subscribers.If you like the product and are interested in buying one for yourself then please use my Banggood affiliate link below. As an affiliate, I will enjoy a small return for any purchases made via this link.5V USB Heated Vest / Winterbanggood.com/custlink/KKvDNt1Z4jCoupon price is $16.99Code: BGvest001I'm looking forward to testing the Vest more during the Winter.To keep the price of the product low, the Vest does not come supplied with any form of power. You will need to provide your own 5V Power Bank.Power Banks are becoming cheaper and a lot of options are now available. The capacity of the Power Bank will determine how long the Vest will heat for.I already own a few Power Banks that I bought locally and the one I use with this Vest is compact and has a rating of 10000mha. This is plenty of power to run the Vest for a good length of time. While testing the vest, I used different heat settings over a three hour period and the Power Bank still had plenty of charge left.The Vest has two pockets in the front, with the power source cable in the left pocket.When the power is initially connected, the Selector Button / Switch will flash. The Vest is switched on by holding the button for a few seconds.Heated Panels are located in the lower front as well as the lower and upper back areas of the Vest. The Vest heats up fast and is at full heat in less than one minute.The heat settings are changed by pressing the Power Button and indicated by a different colour for each setting.Red = Full level heatBlue = Medium level heatGreen = Low level heatThe Jacket is switched off by holding the button for a few seconds.The Vest is lightweight. I like this because I do not like to wear heavy or bulky clothing while I'm working.Here you can find a link to a Power Bank similar to the one I use with the Vestbanggood.com/custlink/GKKGbiG6dbI suggest purchasing a size larger than usual as Chinese sizing may be smaller. I would usually buy a size S and decided to go with size M. The size M fits me well and is comfortable enough for me to move at full range without restriction. This is an important aspect for me.If you are a maker, Banggood have a lot of awesome products that might interest you!banggood.com/custlink/G3KvsptGM1banggood.com/custlink/vGmGQJtvUqIf you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
XK-2 Pocket Hole Jig - Woodworking Tool - Banggood Review The Wood Yogi 2019-12-18 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Banggood sent me the XK-2 Pocket Hole Jig tool to test out and to show to my Subscribers.If you like the tool and are interested in buying one for yourself then please use my Banggood affiliate link below. As an affiliate, I will enjoy a small return for any purchases made via this link.Pocket Hole Jig with Toggle Clamp and Step Drill Bitbanggood.com/custlink/3vKK0HbdNdCoupon Price is $51.99Code: BGwood4My impression of the tool is that it is of excellent build quality and precise. It is simple and quick to set up and use.This is the first time I have tried Pocket Hole Joinery and I will definitely find a use for the technique in the future. Especially now that this Jig makes it so convenient to do so.Instead of simply reviewing this tool, I wanted to build something useful and as the Jig did not come in a case or box, I decided to make one from scrap material and the foam from the original packaging. It was fast to make and worked out well.If you are a maker, Banggood have a lot of awesome products that might interest you!banggood.com/custlink/G3KvsptGM1banggood.com/custlink/vGmGQJtvUqIf you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
How to Make an Arch Toy - Educational Woodworking Project The Wood Yogi 2019-12-17 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓This toy is an idea that my wife had for a simple building skill toy. It didn't take long to make and is easy for a child to use.I used reclaimed Pine and burned numbers onto the locks with my Homemade Pyrography Machine.I think that painting each section would also be a good idea to help a child recognise the form of the complete toy.The base was an afterthought, as the built arch would collapse without side supports and it also provides a reference for starting to build the arch. Wooden toys are great fun to make and an easy project for a beginner to woodworking.I like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
Shoutout Shake - Royalty Free Music for use in YouTube Videos - Makers Music - Short Jingle The Wood Yogi 2019-12-14 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Free Music for Commercial UseNo copyright claims on my royalty free music! You may use my music in your YouTube videos if you provide credit.I am offering my music copyright free to YouTubers because I think it will benefit creators in making great content and provide new music to make their YouTube videos that much better.I like to make music to help create different atmospheres :)My music is mostly intended as non copyrighted music for YouTube content, but it can easily be used as inspirational music, relaxation music, motivational music, meditation music, workout music, gym music, gaming music, vlogging music (vlog music), or even party music.© If you use this track in a video (YouTube/Facebook/Instagram), please provide a link to this video and include the following in your description/comments/caption:Music provided by The Wood Yogi:The Wood Yogi - Shoutout ShakeCheck out my Royalty Free Music Playlist:tinyurl.com/ybav3jdsDownload on SoundCloud:tinyurl.com/sgtxdam© If you use this track on stream (Twitch/YouTube/Mixer), please provide on-screen credit and/or link to my channel in the description panel.If you're a corporate entity looking to license my music for TV/film/advertising/or video game please contact me.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
One Foot Shuffle - Royalty Free Music for use in YouTube Videos - Makers Music The Wood Yogi 2019-12-13 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Free Music for Commercial UseNo copyright claims on my royalty free music! You may use my music in your YouTube videos if you provide credit.I am offering my music copyright free to YouTubers because I think it will benefit creators in making great content and provide new music to make their YouTube videos that much better.I like to make music to help create different atmospheres :)My music is mostly intended as non copyrighted music for YouTube content, but it can easily be used as inspirational music, relaxation music, motivational music, meditation music, workout music, gym music, gaming music, vlogging music (vlog music), or even party music.© If you use this track in a video (YouTube/Facebook/Instagram), please provide a link to this video and include the following in your description/comments/caption:Music provided by The Wood Yogi:The Wood Yogi - One Foot ShuffleCheck out my Royalty Free Music Playlist:tinyurl.com/ybav3jdsDownload on SoundCloud:tinyurl.com/vyema44© If you use this track on stream (Twitch/YouTube/Mixer), please provide on-screen credit and/or link to my channel in the description panel.If you're a corporate entity looking to license my music for TV/film/advertising/or video game please contact me.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
Autumn Fades - Piano Version - Royalty Free Music for use in YouTube Videos - Makers Music The Wood Yogi 2019-12-12 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Free Music for Commercial UseNo copyright claims on my royalty free music! You may use my music in your YouTube videos if you provide credit.I am offering my music copyright free to YouTubers because I think it will benefit creators in making great content and provide new music to make their YouTube videos that much better.I like to make music to help create different atmospheres :)My music is mostly intended as non copyrighted music for YouTube content, but it can easily be used as inspirational music, relaxation music, motivational music, meditation music, workout music, gym music, gaming music, vlogging music (vlog music), or even party music.© If you use this track in a video (YouTube/Facebook/Instagram), please provide a link to this video and include the following in your description/comments/caption:Music provided by The Wood Yogi:The Wood Yogi - Autumn FadesCheck out my Royalty Free Music Playlist:tinyurl.com/ybav3jdsDownload on SoundCloud:tinyurl.com/uc5cpmc© If you use this track on stream (Twitch/YouTube/Mixer), please provide on-screen credit and/or link to my channel in the description panel.If you're a corporate entity looking to license my music for TV/film/advertising/or video game please contact me.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
Autumn Fades - Royalty Free Music for use in YouTube Videos - Makers Music The Wood Yogi 2019-12-11 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Free Music for Commercial UseNo copyright claims on my royalty free music! You may use my music in your YouTube videos if you provide credit.I am offering my music copyright free to YouTubers because I think it will benefit creators in making great content and provide new music to make their YouTube videos that much better.I like to make music to help create different atmospheres :)My music is mostly intended as non copyrighted music for YouTube content, but it can easily be used as inspirational music, relaxation music, motivational music, meditation music, workout music, gym music, gaming music, vlogging music (vlog music), or even party music.© If you use this track in a video (YouTube/Facebook/Instagram), please provide a link to this video and include the following in your description/comments/caption:Music provided by The Wood Yogi:The Wood Yogi - Dulcimer StompCheck out my Royalty Free Music Playlist:tinyurl.com/ybav3jdsDownload on SoundCloud:tinyurl.com/rcl8upr© If you use this track on stream (Twitch/YouTube/Mixer), please provide on-screen credit and/or link to my channel in the description panel.If you're a corporate entity looking to license my music for TV/film/advertising/or video game please contact me.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
T-160 Aluminium / Aluminum Alloy T Square Ruler with Marking Holes - Geoboard Woodworking Project The Wood Yogi 2019-12-11 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Banggood sent me this tool to test out and to show to my Subscribers.If you like the tool and are interested in buying one for yourself then please use my Banggood affiliate link below. As an affiliate, I will enjoy a small return for any purchases made via this link.banggood.com/custlink/mGGKgtARoHFor a 22% discount, use this Code: BGwood3 Valid until January 31st 2020My impression of the tool is that it is of excellent quality and precise. It is useful in many situations for measuring and marking, as I have demonstrated in the video and I can recommend it if you are looking for a tool that is similar.The tool has a ruler with measurements in 5 mm increments up to 160mm.The marking holes begin at 5mm and up to 160mm in 1mm increments.I checked the tools accuracy against existing squares that I have and it is very accurate. It is solid to hold and there are two Allen screws for adjustment if the tool should need setting after knocking or dropping etc. Instead of simply reviewing this tool, I wanted to show how easy it is to use and especially in creating or building a woodworking project with. I decided on a quick educational toy known as a Geoboard. A Geoboard is a mathematical manipulative used to explore basic concepts in plane geometry and useful in education. It fits very well into systems such as the Montessori and Waldorf school and is ideal for all students including home study or home schooling.If you are a maker, #Banggood have a lot of awesome products that might interest you!banggood.com/custlink/G3KvsptGM1banggood.com/custlink/vGmGQJtvUqIf you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Check me on other internet placesinstagram.com/thewoodyogitwitter.com/thewoodyogiNamaste ॐ
Dulcimer Stomp - Royalty Free Music for use in YouTube Videos - Makers Music The Wood Yogi 2019-12-10 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓No copyright claims on my royalty free music! You may use my music in your YouTube videos if you provide credit.Free Music for Commercial UseI am offering my music copyright free to YouTubers because I think it will benefit creators in making great content and provide new music to make their YouTube videos that much better.I like to make music to help create different atmospheres :)My music is mostly intended as non copyrighted music for YouTube content, but it can easily be used as inspirational music, relaxation music, motivational music, meditation music, workout music, gym music, gaming music, vlogging music (vlog music), or even party music.© If you use this track in a video (YouTube/Facebook/Instagram), please provide a link to this video and include the following in your description/comments/caption:Music provided by The Wood Yogi:The Wood Yogi - Dulcimer StompCheck out my Royalty Free Music Playlist:tinyurl.com/ybav3jdsDownload on SoundCloud:tinyurl.com/rlu6h3e© If you use this track on stream (Twitch/YouTube/Mixer), please provide on-screen credit and/or link to my channel in the description panel.If you're a corporate entity looking to license my music for TV/film/advertising/or video game please contact me.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
Bandsaw Tip - Cutting Round Stock - Woodworking Tool The Wood Yogi 2019-10-22 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓I wanted to show the method I use for cutting round stock on the Bandsaw after I watched a recent video of an excellent Jig designed by Rob at Make ThingsHere is the link to Rob's video: youtu.be/8AVJkx9IMLICutting round stock on a Bandsaw can be very dangerous as the blade can grab the material and pull fingers in toward the blade. It can also damage the blade and the machine.I am not recommending the method I demonstrate in the video. I simply want to show the method I use and that it works for me.You will notice that the wood I cut is scorched after I cut it, as it is a really dry, hard piece of Ash and I am waiting for a new blade for the Bandsaw.Subscribe to my Channel: http://bit.ly/2odh382I like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
Figured Horse Chestnut Mallet - Woodturning Project Giveaway The Wood Yogi 2019-10-13 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓This Mallet was made as part of a giveaway that I volunteered to sponsor on Instagram.The Mallet is made from well seasoned Horse Chestnut Wood. This piece came from a crotch section that contained a burl / burr and is well figured.It feels really well balanced with a good weight to it.I finished the Mallet using Organic Boiled Linseed Oil and Wax.For a chance to win this Mallet and other fantastic prizes from a large selection of sponsors you will need to check out the giveaway on Instagram hosted by Adjilonggowoodworks.etc via this link: tinyurl.com/yyzqscskIf you decide to take part in the giveaway, then I wish you the best of luck.This is not a detailed how to make video. It shows the usual approach I personally take to create a piece of work. Enjoy :)Follow my own Instagram HERE: tinyurl.com/yyehy42zMaking a Mallet is a popular project for woodturning and I hope this video helps to inspires you to make your own.I like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and for me to create new content on a regular basis.Namaste ॐ
How to Make Bench Pyramids - Easy Woodworking Tool Project The Wood Yogi 2019-09-18 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓Description HEREHere is a simple way to create supports for your craft or hobby work. These help to support the work while applying a finish to the surface of a material such as wood.They make minimal contact with the surface that is resting on them and can be made quickly using scrap or reclaimed / recycled wood.These are an easy DIY tool project and great for a beginner to woodworkingI did not apply a finish to mine as I like the rustic wood look.I like to use bench cookies sometimes, but these small pointed triangle shaped supports are great for a small craft project and with them being very easy to make and inexpensive, you can make as many as you need from scrap or recycled wood. An ideal DIY reclaimed wood project.The dimensions of the ones I made in the video are:40mm Wide50mm High including a Base of 10mmMake as many as you need and have fun :)If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
Making a Toy Boat - Simple Woodworking Project to do with Children The Wood Yogi 2019-08-24 | ↓↓↓ Details in the description below↓↓↓ Subscribe ↓↓↓ Like ↓↓↓Share↓↓↓My 4 year old Son and I made a simple boat. It gave us both the opportunity to learn new skills. We drew a basic Boat shape on a piece of Reclaimed Wood and fixed a dowel into it. A piece of Paper was used to make a sail.The project gave my son the chance to experience how different tools work. We usually always begin with a talk about safety. I set the drill on a slow speed to make sure their was no chance of chips hitting us as we needed to buy new safety glasses due to breaking the last pair. I have many years experience and trust my judgment, but I advise always to make sure that children were eye protection. I always explain that sharp blades can cut wood easily and that wood is harder than the skin on our fingers. I therefor try to hold and cover his hands far from the blade to make sure their is no slipping or that he reaches out due to being distracted.Work safely and enjoy making things together :)Music by The Wood Yogi:Out of the BoxHappy DanceI like the idea of making my own Tools, especially if it is a Tool that is not easily found or readily available. Handmade Tools give great satisfaction and for me it is fun knowing that I created something to help me better improve my woodworking experience.If you like what I do, then please Subscribe, Like and Share my Videos. It really helps to support My Channel and to create new content on a regular basis.Namaste ॐ
