This M2 Mac Pro killer runs a GPU—and Windows on Arm! Jeff Geerling 2023-04-21 | Special thanks to the team at Ampere for making this happen!Disclaimer: The kind folks at Ampere and ADLINK sent me the Ampere Altra Developer Platform, but offered no other form of compensation for this video, and had no input into the contents, nor did they see it before it was published on YouTube. See my sponsorship policies here: github.com/geerlingguy/youtube#sponsorshipsSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineeringMentioned in this video: - Ampere Altra Dev Kit: https://www.ipi.wiki/products/com-hpc-ampere-altra - Ampere Altra Developer Platform: https://www.ipi.wiki/pages/ampere-altra-developer-platform - Top500 Benchmark (open source): github.com/geerlingguy/top500-benchmark - I tested EVERY GRAPHICS CARD on a Raspberry Pi: youtube.com/watch?v=l9dItRUjQ0k - Cloudbase article on Windows support: https://cloudbase.it/ampere-altra-industry-leading-arm64-server/ - DB Tech (thanks for the help!): youtube.com/dbtechyt#ArmContents:00:00 - What the Mac Pro COULD be01:17 - What if...?02:54 - A peek at the hardware04:17 - This System is Ready (for any Linux)04:47 - Benchmarks and Arm efficiency07:58 - Windows on Arm (on Ampere)?10:39 - What about graphics cards?
Raspberry Pi 5: EVERYTHING you need to know Jeff Geerling 2023-09-28 | Surprise! Raspberry Pi 5 is coming in 2023. This video highlights everything new in Pi 5.Find out more about Raspberry Pi 5: raspberrypi.com/products/raspberry-pi-5Some of the videos I referenced in this video: - How Raspberry Pis are Made (Factory Tour): youtube.com/watch?v=k2C4lbbIH0c - Pi Global Shutter Camera: youtube.com/watch?v=3HhdO11lD04 - WiFi 6E on the CM4: youtube.com/watch?v=TdUxWEyafUg - Rock 5 model B review: youtube.com/watch?v=CxD_0q8tAdc - Time Card - GPS and OCXO for the Pi CM4: youtube.com/watch?v=dxtVyDXvIBESupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#RaspberryPi #Pi5Contents:00:00 - Pi 5's uphill battle00:45 - What's new?03:51 - What's different?05:43 - Power07:34 - Performance10:17 - Thermals, new Case, Active Cooler11:59 - Efficiency12:51 - GPU and Pi OS performance13:57 - PCIe: Go big or go home16:43 - IO: USB, microSD, GPIO, and RP119:27 - Camera and comparisons
The Raspberry Pi 5 in 60 seconds #shorts Jeff Geerling 2023-09-28 | The Raspberry Pi 5 is more than twice as fast as the Pi 4 at... everything! Check it out in this quick overview.Check out the Pi 5: raspberrypi.com/products/raspberry-pi-5Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering
Pulling network cable: 200 Gbps or bust! (moving 06) Jeff Geerling 2023-09-22 | Get an exclusive Surfshark deal! Enter promo code REDSHIRTJEFF for an extra 3 months free at https://surfshark.deals/REDSHIRTJEFFStructured cabling doesn't have to be hard! Just make sure you have a good plan, and hopefully someone to help with the cable pulls.Here are all the tools and cables I used (some links are affiliate links): - Monoprice Cat6A CMP UTP Plenum cable: amzn.to/45Z8jlk - FiberCablesDirect LC OM4 OFNP Fiber patch cable: amzn.to/3PN9lvp - Beam Clamps (25 pack): amzn.to/48qCzHM - Bridle Rings (25 pack): amzn.to/3RtXQKz - Plastic grommets for metal studs: amzn.to/3PqZBpd - Pulling Pal low-voltage wire pulleys: amzn.to/46gCLas - Ideal Powr-Fish Pull line: amzn.to/3LxDhZU - Colorado Jim Cable Supports: amzn.to/3PHEeRH - Greenlee GSB12 Step Drill Bit: amzn.to/3rqJVKo - DeWalt 20V Max Atomic Brushless drill: amzn.to/3RLIrp9Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#Sponsored #Studio #NetworkingContents:00:00 - Framing's done!00:26 - Why wire?01:56 - Noisy neighbors, spying ISPs02:51 - Construction updates05:17 - Structured cabling08:13 - Pulling cable11:05 - Terminations
How I almost broke MrBeasts 1-100 video Jeff Geerling 2023-09-15 | New Customer Exclusive - $25 off Your Purchase of $100 or More: https://micro.center/75bk Check Out Micro Center's Next New Store in Charlotte, Opening by 2025: https://micro.center/vuz9 Build Your PC with Micro Center's Custom PC Builder: https://micro.center/dtm3I used to be sane last Thursday.Blog post on architecture: jeffgeerling.com/mr-beast-architectureVideo with my Dad at MrBeast HQ: youtube.com/watch?v=BzjFK9UGS5sPatreon exclusive architecture overview: patreon.com/geerlingguy/postsOther videos and things mentioned in the video: - Ages 1 - 100 Fight For $500,000: youtube.com/watch?v=FM7Z-Xq8Drc - Chronos 2.1 High Speed camera: krontech.ca/product/chronos-2-1-hd-high-speed-camera - Balena Etcher Pro: balena.io/etcher-pro - Can static KILL your PC? (ft. Electroboom): youtube.com/watch?v=nXkgbmr3dRA - The 2nd Empire Strikes Back (thanks for the antique button!): youtube.com/channel/UCuteYo4Kgm1t1DqkUV33BcQSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#MrBeast #SponsoredContents:00:00 - Intro00:04 - Prototyping02:55 - Building05:00 - Buttons07:15 - Gotta get to NC08:36 - Challenges on-set10:02 - The hotel's out to get me10:45 - More challenges11:56 - Wiring woes15:43 - Signs of hope16:47 - Corruption, duponts, and serendipity18:26 - Fixing while filming22:06 - It was down to the wire18:01 - Five Jimmies, but no MrBeast!
Cinebench 2024 arm64 record attempt! #shorts Jeff Geerling 2023-09-08 | Going to try to get the record for the fastest Arm64 run on Cinebench 2024, now that they have proper aarch64 support for Windows on Arm!Testing on an Adlink Ampere Altra workstation with 96 CPU cores and 96 GB of RAM.Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering
Pigeon beats Internet #shorts Jeff Geerling 2023-08-30 | Birds rule.Watch the full video: youtube.com/watch?v=4pz2kMxCu8ISupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering
Testing one of the oldest Internet myths Jeff Geerling 2023-08-28 | Bird beats Internet. Or does it? It hasn't been tested since 2009!Thanks to 45Drives for paying for my flight to Canada. You can check them out here: 45drives.comSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineeringSome of the items used in this video (affiliate links): - Sandisk 1TB Extreme PRO USB Flash Drive: amzn.to/3qG8X8h - OWC 5 port Thunderbolt 3 Hub: amzn.to/3qNW4sI - Sabrent Rocket Q 8TB NVMe SSD: amzn.to/3OWkOqL - RIITOP NVMe USB 3.1 Gen 2 Dock: amzn.to/44nrfJ6Thanks especially to the following for helping film this video: - @TechnoTim - @Level1Techs - @CraftComputing - @45Drives Contents:00:00 - Never underestimate bandwidth01:22 - South Africa, 200901:45 - Homing Pigeon 10103:09 - Time To Transfer03:59 - Flight!04:58 - Pigeon transfer speed05:34 - I am become pigeon, transferer of data07:17 - Flight to Canada08:14 - Results08:46 - Pigeon Data Transfer Equation09:29 - Risks and problems - IPoAC
Inside 45Drives Storage Lab! #shorts Jeff Geerling 2023-08-26 | At the 45Drives Creators Summit, we got to take a peek inside the storage lab, where they build, test, and repair Storinators, Stornados, Destroyinators, and even prototype things like the cute little Storinator Jr!Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering45Drives paid for my flight to Sydney, NS, CA, but did not offer any other form of compensation or sponsorship for this video. I just really like their philosophy on storage, and wanted to talk to them about ideas like the Storinator Jr and the Homelab-focused servers of the future!
Soundproofing: a little rubber goes a long way (moving 05) Jeff Geerling 2023-08-18 | Soundproofing is an art. Here's how we're doing it—starting with the walls.Mentioned in this video: - Gamers Nexus Hemi-Anechoic Chamber: youtube.com/watch?v=eUqYTenB2A0 - LTT Server Room Soundproofing: youtube.com/watch?v=u0PkoYN45tYSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineeringContents:00:00 - Soundproofing is an art01:04 - Framing a normal wall02:02 - Framing a studio wall03:31 - Ceiling treatments04:30 - Holes, electrical, and HVAC05:23 - Creating... an echo chamber?06:00 - Sound treatment (on the inside)
LTX 2023 was an absolute blast! (Add something catchy here) Jeff Geerling 2023-08-01 | LTX 2023 blew away my expectations. Definitely a great comeback after the pandemic break. Despite sometimes long lines, the enthusiasm and kindness shown by all those I met were amazing.I didn't expect to meet so many people and have so many great conversations on the floor. I had to duck out a couple times just because the sheer energy was so high, lol.Mentioned in this video: - 2023 Homelab Creator Livestream: youtube.com/watch?v=wHlJR6vpRkc - Time Card mini Livestream timer build: youtube.com/watch?v=dxtVyDXvIBE - LTT's video on the Ulitmatte: youtube.com/watch?v=_CxkmtBqGn8Creators I met in the video, in the order of their appearance: - @LinusTechTips - @Level1Techs - @CrosstalkSolutions - @ServeTheHomeVideo - @TechHut - @Jayztwocents - @TechTechPotato - @3DPrintingNerd - @snazzy - @CraftComputing - @EposVox - @ThePhawx - @saradietschy - @ChrisTitusTech - @ThioJoe - @Glarses - @HardwareHaven - @45Drives Contents:00:00 - Live from the Expo!00:51 - Day 0: Travel time01:42 - Day 1: LTT screwdriver, redout edition05:12 - A bug with the GPS clock!06:12 - Back to the show floor07:05 - Day 2: Meeting and greeting08:50 - Apparently I'm retro10:20 - Creator LMG Studio Tour (and a bonus bell ding!)
2023 Homelab Creator Charity Livestream (LTX 2023) Jeff Geerling 2023-07-29 | Join in the fun at LTX23, as Jeff (@JeffGeerling) and Chris (@CrosstalkSolutions) interview 10 homelab content creators LIVE from the expo floor!HUGE thanks to Rack Studs for sponsoring this stream: Go buy Rack Studs using this link, your fingers will thank you! amazon.com/rackstuds?maas=maas_adg_C74EE78C2E32443567B3C092F08FB76F_afap_abs&ref_=aa_maas&tag=maasCreators who will be present:@ServeTheHomeVideo @Level1Techs @LinusTechTips @CraftComputing @ChrisTitusTech @snazzy @TechHut @HardwareHaven (And Jake, Dan, and Tim from @LinusTechTips!) Learn more about the ITDRC: itdrc.org#LTX2023 #Homelab #SponsoredContents:00:00 - We'll do it LIVE00:10 - Intro00:38 - ITDRC04:33 - Sponsor - Rack Studs05:18 - Jake (LTT)08:15 - Patrick (ServeTheHome)09:17 - The blood sacrifice09:21 - Back to Patrick lol13:18 - Wendell (Level1Techs)18:34 - Jeff (Craft Computing)23:41 - Chris Titus Tech28:45 - Quinn (Snazzy Labs)34:28 - Brandon (TechHut)38:28 - Colton (Hardware Haven)44:17 - Tim (LTT)48:09 - Dan (LTT)53:40 - Wrap!
This card puts GPS and a tiny OVEN inside your PC! Jeff Geerling 2023-07-27 | Special thanks to Timebeat for sending the Time Card, the GPS modules, and the tiny little time oven chip!If you want to buy one of these things, Timebeat sent me a discount code for you to use, for 20% off: https://store.timebeat.app/discount/IKNOWREDJEFFSome of the things mentioned in this video (some links are affiliate links): - ITDRC Homelab Creator Livestream: youtube.com/watch?v=wHlJR6vpRkc - Timebeat Time Card mini: https://store.timebeat.app/collections/timecard-mini - Open source project on GitHub: github.com/geerlingguy/ltx2023 - Adafruit miniPiTFT 1.3": adafruit.com/product/4484 - Blinkstick Nano: blinkstick.com/products/blinkstick-nano - GPIO header extender: amzn.to/44IbTzE - 12v 3000 mAh battery: amzn.to/3QgcrbU - GPS antenna: amzn.to/3O4NL3gSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#TimeCard #RaspberryPi #LTX2023Contents:00:00 - It's a Pi Sandwich!00:51 - GPS and a tiny time oven02:14 - Holdover is important03:17 - LTX 2023 time04:15 - A closer look at the Time Card mini05:22 - How I built it, how it works06:37 - Good, bad, at least it'll be ACCURATE!07:07 - ITDRC Homelab Creator Livestream
FLASH FIGHT! Two NASes, all Flashes #shorts Jeff Geerling 2023-07-25 | Check out a longer video with more detail on these two NASes: youtube.com/watch?v=5QH8Dj6g_NkLinks to the products mentioned (some are affiliate links): - ASUSTOR AS-T10G3 Dual M.2 + 10 GbE card: amzn.to/3D1DUpV - TeamGroup M.2 SATA 1TB SSD (for Pocket NAS): amzn.to/3D3FJTl - TeamGroup M.2 NVMe 1TB SSD (for Flashstor): amzn.to/3PPySV0 - ASUSTOR Flashstor 12 Pro: amzn.to/3NIfQxh - SilverTip Labs' PocketNAS questionnaire: https://rpgtavern.live/index.php?page=mininas - Setting up OMV on the Rock 5 model B: jeffgeerling.com/blog/2023/building-tiny-6-drive-m2-nas-rock-5-model-b - Installing TrueNAS on the ASUSTOR: jeffgeerling.com/blog/2023/how-i-installed-truenas-on-my-new-asustor-nasSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering
Time for DEMOLITION! And a little percussive maintenance (moving 04) Jeff Geerling 2023-07-18 | Construction begins soon! That means destruction starts NOW.Check out the videos from @The2ndEmpireStrikesBack restoring the front of his house: - youtube.com/watch?v=9wt9R-P_xRM - youtube.com/watch?v=CUGGhD8WCHI - youtube.com/watch?v=AT-23_TtMQcSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineeringContents:00:00 - New wall, much like the old wall01:01 - Tear down that wall!02:14 - Today's tasklist02:33 - Did you turn it off and on again? An IT tale04:59 - Construction start (soon!)05:21 - Tackling the spackling
All-flash NAS fight: DIY or Buy – Round III! Jeff Geerling 2023-07-10 | Special thanks to both ASUSTOR and Silvertip Labs for sending these NAS storage servers to test!I purchased the drives used in the video, though the two Seagate IronWolf NVMe drives I put into my older NAS were provided by Seagate.Part I: youtube.com/watch?v=vBccak8f-VYPart II: youtube.com/watch?v=V3jwQzb46ZcHere are things I mentioned in this video (some links are Amazon affiliate links): - ASUSTOR AS-T10G3 Dual M.2 + 10 GbE card: amzn.to/3D1DUpV - TeamGroup M.2 SATA 1TB SSD (for Pocket NAS): amzn.to/3D3FJTl - TeamGroup M.2 NVMe 1TB SSD (for Flashstor): amzn.to/3PPySV0 - ASUSTOR Flashstor 12 Pro: amzn.to/3NIfQxh - SilverTip Labs' PocketNAS questionnaire: https://rpgtavern.live/index.php?page=mininas - Setting up OMV on the Rock 5 model B: jeffgeerling.com/blog/2023/building-tiny-6-drive-m2-nas-rock-5-model-b - Installing TrueNAS on the ASUSTOR: jeffgeerling.com/blog/2023/how-i-installed-truenas-on-my-new-asustor-nasSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#ASUSTOR #NAS #homelab Contents:00:00 - Flash-off and new plans00:39 - The contenders: Flashstor and Pocket NAS01:28 - Pocket NAS: Rock 5 model B and OMV04:51 - Flashstor 12 Pro: Intel and ADM07:11 - PCIe is the bottleneck08:11 - Read speeds good enough for video editing09:28 - The best feature: TrueNAS?11:11 - The victor11:59 - A glimpse of the future
Jeff Geerling Kickboxing Computer #shorts Jeff Geerling 2023-07-06 | You searched it. I did it.Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering
96 ARM cores—its massive! (Gaming + Windows on Arm!) Jeff Geerling 2023-07-03 | Can the world's fastest Arm desktop handle gaming? And before that, can it even install Windows?See my first video on this desktop here: youtube.com/watch?v=wl5H5rT87JEAdlink/Ampere did not pay for this video or sponsor it in any way, and had no input into the content of the video. They did, however, supply the hardware under test, so I have added the 'Sponsored' disclaimer to this video and am disclosing the extent of the relationship here.Mentioned in this video: - Adlink Ampere Altra Dev Platform: https://www.ipi.wiki/pages/ampere-altra-developer-platform - Ampere's guide to installing Windows: github.com/AmpereComputing/Windows-11-On-Ampere - Ampere's guide to running HPL: github.com/AmpereComputing/HPL-on-Ampere-Altra - Ampere's guide to running GPU-accelerated Doom 3 on Linux: github.com/AmpereComputing/NVIDIA-GPU-Accelerated-Linux-Desktop-on-AmpereSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#Ampere #ArmContents:00:00 - Fastest Arm desktop (no more)00:54 - Can it run Crysis? Windows?03:37 - Windows on Arm is a chicken-and-egg problem05:02 - Too many cores, can't compute06:26 - Steam, Games, and Compatibility on Windows08:38 - Back to Linux (and a RAM upgrade)10:06 - Going for a teraflop10:37 - GPUs - 3080 Ti or 4090?12:58 - Gotta go fast(er)!
Keeping my promises #shorts Jeff Geerling 2023-06-29 | Red Hat angered most of the Linux community last week. That's sad. I'm giving away my book. That's more like it!Get your free copy: leanpub.com/ansible-for-devops/c/CTVMPCbEeXd3Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering
Huge Open Source Drama Jeff Geerling 2023-06-26 | Red Hat just erected a paywall in front of the source code to their Linux distribution.Are they burning bridges to the wider open source ecosystem?Referenced in this video: - Red Hat's blog post announcing the change: redhat.com/en/blog/furthering-evolution-centos-stream - Deprecation of RHEL support: jeffgeerling.com/blog/2023/removing-official-support-red-hat-enterprise-linux - Software Freedom Conservancy blog post: sfconservancy.org/blog/2023/jun/23/rhel-gpl-analysis - Red Hat Linux (2010): youtube.com/watch?v=FztGWaP8v2Q - The Red Hat Story (2021): youtube.com/watch?v=kFyxe_tCxtoSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#opensource #redhat
What hath the Time Owl brought today? #shorts Jeff Geerling 2023-06-21 | Timebeat just launched the TimeCard mini, and you can find out more here: https://store.timebeat.app/collections/timecard-miniIt's expensive, but that's because it includes a *full* PTP time server with GPS and PPS output, including a Raspberry Pi and high-accuracy TXCO timing circuit!Note: Timebeat did NOT offer any form of compensation for this video, but since they provided the hardware for review, I am checking the 'Paid Promotion' box on the video.More to come, make sure to follow me and see what I'm bringing to LTX 2023...Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering
I made my Internet FASTER with this one simple trick! (moving 03) Jeff Geerling 2023-06-19 | Get an exclusive Surfshark deal! Enter promo code REDSHIRTJEFF for an extra 3 months free at https://surfshark.deals/REDSHIRTJEFFAlso thanks SO MUCH to Patrick from @ServeTheHomeVideo for sending the little mini PC and advice setting it up!Mentioned in this video: - STH video on Fanless Intel N5105 Mini PCs: youtube.com/watch?v=rUuaAPG0PxU - OPNsense: opnsense.org - @homenetworkguy Wireguard setup guide: homenetworkguy.com/how-to/configure-wireguard-opnsense - Netgear WAX620 Setup and Review video: youtube.com/watch?v=LDflrf85h9Y - Netgear WAX630E Testing with the Raspberry Pi: youtube.com/watch?v=TdUxWEyafUgGear I'm using for the Internet Crash Cart: - QNAP 10G/2.5G Switch: amzn.to/43KdwfN - Linksys EA7500-4B WiFi 5 Router: amzn.to/3JijFb8 - Netgear WAX620 WiFi 6 AP: amzn.to/3NAeHsO - 4-port fanless mini PC: aliexpress.us/item/3256804258285386.html - Simplisafe Security System: amzn.to/43Ke8lB - Shark Costume: amzn.to/441cZGb - Small wheeled cart (from Lowes): lowes.com/pd/Style-Selections-Chrome-Steel-Base-with-Bamboo-Wood-Top-Kitchen-Cart-24-in-x-19-7-in-x-38-in/1000053619Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#Homelab #SponsoredContents:00:00 - Networking plans00:46 - A different kind of VPN01:50 - OPNsense and Wireguard04:59 - WiFi 6 AP upgrade07:05 - Internet IS faster now!08:56 - Kick
Beepberry! Tiny Pi-based Blackberry cyberdeck #shorts Jeff Geerling 2023-06-14 | The Beepberry is a tiny portable Blackberry-esque cyberdeck powered by a Raspberry Pi Zero W (I'm using a Zero 2 W in mine).I bought this back when it was announced, but right now it's sold out; sign up to be notified when it's back at shop.sqfmi.com/products/beepberryFind out more in my blog post: jeffgeerling.com/blog/2023/messing-beepberry
How a Raspberry Pi is made (in 60 seconds) #shorts Jeff Geerling 2023-06-09 | Here's a tour of the Pi 4 production line at the Sony Technology Centre in Pencoed, Wales, UK.Watch a longer video with all the details here: youtube.com/watch?v=k2C4lbbIH0cSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering
How Raspberry Pis are made (Factory Tour) Jeff Geerling 2023-06-08 | Huge thanks to Sony for the tour, and to Seeed Studio for sponsoring! Get $25 off reTerminal DM with: Jeff*reTerminalDMMore about the reTerminal DM: seeedstudio.com/reTerminal-DM-p-5616.html?utm_source=JeffGeerling&utm_medium=youtube&utm_campaign=JeffGeerlingAnd read about Seeed Studio's ODM services: seeedstudio.com/odm?utm_source=JeffGeerling&utm_medium=youtube&utm_campaign=JeffGeerlingSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#RaspberryPi #Factory #SponsoredThanks especially to the whole team at Raspberry Pi and the UK Sony Technology Centre, especially: - Alan, our excellent driver (who made sure we got to and from Wales safely) - Toby and Natalie from Raspberry Pi for assisting, helping with a few camera angles - Kalina, Zac, Andrew, Eliot, and all the other gracious folks from Sony who made this video possible - Brian for sending some shots of the pick and place machines in action - My wife, for holding down the fort while I was full nerd mode in the UKContents:00:00 - Baking Pis02:35 - Inspection and royal invitations03:37 - Robots!04:46 - Humans!06:32 - Selective Soldering07:24 - Pis building Pis08:26 - Final QA and beds of nails09:04 - Building Pis: it takes two10:19 - Pack it up13:08 - Lots of Pis
Burglars Beware! Jeffs security is here (moving 02) Jeff Geerling 2023-06-01 | I set up a security system, got the NVR running, saved energy with new lights, and cleaned up a bit.How long will that $50 Walmart vacuum last?A few links to things I mentioned in the video (some links are affilate links): - SimpliSafe 5-piece Security System: amzn.to/45FzUby - @lockpickinglawyer SimpliSafe bypass: youtube.com/watch?v=UlNkQJzw4oA - DeWalt Atomic 20V Max Drill: amzn.to/3qgcREf - Klein Tools 32314 Electronic Screwdriver: amzn.to/3ILihgN - Klein Tools 5144BHB14OS Hard-Body Tool Bucket: amzn.to/43gOKnm - Hikvision Password Reset Tool: ipcamtalk.com/pages/hikvision-password-reset-tool - STC Ratings: acousticalsurfaces.com/blog/acoustics-education/sound-transmission-class-stc-ratingSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineeringContents:00:00 - NVR works!00:51 - Out with ADT, in with... SimpliSafe?01:34 - Sound Transmission Class03:22 - Internet crash cart03:56 - Saving power with T8 replacements06:57 - Cleaning, and "Why?"09:36 - Architectural plans and sound reduction
Building Mr. Beasts 1-100 game with 100 SBCs! #shorts Jeff Geerling 2023-05-27 | It. Was. Insane!Full video coming... soon. When I have time to edit the whole thing. Also subscribe to @GeerlingEngineering — I took my Dad with me the first couple days!Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering
I visited the only Raspberry Pi store in the world Jeff Geerling 2023-05-25 | I wanted to see this mythical place where Raspberry Pis are actually in stock!And if you look _very_ closely, you'll see they even had one Compute Module 4 in stock at the end of the day lol.Thank you SO much to everyone who supports this channel: the viewers, subscribers, patrons, sponsors, members... you all made it possible for me to take this trip to the UK and visit the Pi Store, the factory, and interview Eben Upton, so—thank you!Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineeringContents:00:00 - Dad can't find a Pi00:16 - Hello Pi Store02:11 - Filling the hole Maplin left03:15 - Scalpers ruin EVERYTHING04:01 - Exploring the Pi gear05:02 - Maker wall06:29 - A little Pi History (in the checkout counter)07:14 - Buy and Fly a Pi08:08 - Delivery - and good news!
I need more SPACE! Studio moving vlog part 1 #shorts Jeff Geerling 2023-05-19 | My little 100 sq ft basement office/studio is finally full. Plus I can't record during the day while my kids are awake and running around upstairs. So I'm working with an architect to plan out a new office and studio space nearby.Today I'm just cleaning, replacing lights, and setting up security and monitoring. I'll keep you posted on the rest of the process!Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#Shorts
He started a computing REVOLUTION—then the shortage hit Jeff Geerling 2023-05-18 | Thank you so much to PiShop.us for sponsoring this video! Find them here: pishop.usI interviewed Eben Upton, co-founder of Raspberry Pi, in early May. We talked about Pi shortages, RP2040, RISC-V, Sony investment, and how the name 'Raspberry Pi' was born!Blog post with more on RISC-V and Pi: jeffgeerling.com/blog/2023/what-eben-upton-said-about-risc-vSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#RaspberryPi #SponsoredContents:00:00 - Setting the stage00:38 - What caused the shortages?01:47 - PiShop.us - where I bought my first Pi 402:43 - Getting swallowed up by backlog07:18 - Dec 2022 predictions - do they hold up?09:24 - Anger in the community11:40 - How to prevent scalping14:23 - What Eben is NOT sorry about16:00 - RP2040 and Raspberry Pi Pico18:41 - RISC-V in the future? Ian Cutress chimes in19:32 - Eben Upton's thoughts on RISC-V22:23 - Arm's value proposition and beating Apple23:55 - Sony's investment in Raspberry Pi27:56 - Business vs consumer30:43 - Why 'Raspberry'?32:16 - 4090 on a Pi when? (Better Pi PCIe)33:58 - Legacy35:26 - Pi 5? New silicon? What's next?
First day in a new space! (moving 01) Jeff Geerling 2023-05-11 | Thank you SO much to everyone who supports this channel. I'm excited for all the adventures we'll have in this new space! (And no, I haven't told Red Shirt Jeff about it yet.)Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#vlog #studioContents:00:00 - Space01:05 - Day 103:05 - Fuel for the day04:15 - Janitor Jeff05:34 - Cable installed, NVR not06:52 - Exciting times ahead
One YouTube comment made me smarter (no more asphyxiation)! #shorts Jeff Geerling 2023-05-09 | Thanks to one YouTube commenter, I finally found a solution to my ventilation problem, and I will (hopefully) no longer operate on reduced brain capacity due to high CO2 levels in my studio!This video is not sponsored; here's the vent I bought (4x10"): ariavent.com/collections/all/products/framed-wall-vent-lite?variant=43398965919904And here's how I monitor my CO2 levels in my studio: jeffgeerling.com/blog/2021/airgradient-diy-air-quality-monitor-co2-pm25Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#Shorts
Build your OWN WireGuard VPN! Heres how Jeff Geerling 2023-05-05 | Get an exclusive Surfshark deal! Enter promo code REDSHIRTJEFF for an extra 3 months free at https://surfshark.deals/REDSHIRTJEFFSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#Sponsored #RaspberryPi #VPNLinks to everything mentioned in this video: - PiVPN: pivpn.io - Surfshark (extra 3 months free): https://surfshark.deals/REDSHIRTJEFF - First five minutes Linux security with Ansible: youtube.com/watch?v=gV_16dU7XjM - RedShirtJeff.com 'It was DNS' shirt: redshirtjeff.com/listing/it-was-dns-shirt?product=211Contents:00:00 - I need my OWN VPN00:32 - What you need01:57 - Sometimes you need a different KIND of VPN02:59 - PiVPN on a Pi03:47 - PiVPN Setup05:34 - Security - you've been warned06:17 - Setting up our first VPN connection07:41 - Speeeeed08:17 - Home Assistant from anywhere on my iPhone09:06 - Debugging VPN problems09:49 - No Static IP? No problem!11:02 - CG-NAT? Yeah, that's a problem11:55 - Do you really need your own VPN?
The fastest Arm desktop PC in the world #shorts Jeff Geerling 2023-04-28 | ...and I got Windows running on it!Special thanks to the teams at ADLINK and Ampere for their assistance squashing a bug with their open source firmware for the Ampere Altra Max that was preventing Windows 11 from booting.I just posted a FULL video on this machine here: youtube.com/watch?v=wl5H5rT87JEI'm currently testing anything and everything on this machine, from graphics card support, to Cinebench running emulated in Windows, to the age-old question:Will it run Crysis?(Spoilers: *yes*!)Subscribe — more to come soon :)
I made a computer you plug into a graphics card #shorts Jeff Geerling 2023-04-14 | The 4090 is OBSCENELY large! It didn't fit in my PC case, so I built a computer that plugs into IT!Check out the full video here: youtube.com/watch?v=l9dItRUjQ0k
I tested EVERY graphics card on a Raspberry Pi! Jeff Geerling 2023-04-13 | Thanks to JLCPCB for sponsoring this video! jlcpcb.com/?from=Jeff1-8 Layer PCBs for only $2, free assembly for 1-20 Layer PCBs, and new users can get $54 coupons!Also mentioned: - The open source Pi4GPU project: github.com/geerlingguy/pi4gpu - See ALL the gory details for every graphics card: pipci.jeffgeerling.com/#gpus-graphics-cards - Video from Captains Workspace (4090 size joke): youtube.com/watch?v=0frNP0qzxQc - Video from LTT (ASRock Rack M2_VGA): youtube.com/watch?v=DXo2m_XlH4s - Video about getting GPUs working from last year: youtube.com/watch?v=crnEygp4C6g - Video about the Petabyte Pi Project: youtube.com/watch?v=BBnomwpF_uY - Thanks to Lambda Labs for sending the RTX 8000: lambdalabs.com - Contact Mirek from Mirkotronics for PCB Design: pcb@mirkotronics.plSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#RaspberryPi #SponsoredContents:00:00 - Plug the computer into the GPU00:42 - The Widow Maker01:28 - How we made the PCB02:07 - First boot!02:59 - Not-so-cool - AMD flops04:00 - Nobody asked, Intel04:53 - Thank the makers!05:49 - The RTX 8000 - perfect for the Pi?06:53 - So. Many. Cards.07:20 - Wait... it worked???07:43 - Why is it so hard? Featuring my Only Fans08:26 - How about a little M2_VGA?09:09 - I'm not insane! (maybe)
This computer cant be hacked! (2023 Best of CM4) Jeff Geerling 2023-04-06 | The Secure Edge Node is certainly the most secure Raspberry Pi! This video features the most interesting CM4 boards of 2023.Disclaimer: All the products featured in this video were sent by the manufacturers. I did not receive any other form of compensation for this video, nor did they have any input into the content of this video. See my sponsorship guidelines here: github.com/geerlingguy/youtubeCheck out everything mentioned in this video: - Axzez Interceptor 1U 5-drive: axzez.com/product-page/interceptor-1u-case - Axzez Interceptor 1U 3-drive: axzez.com/product-page/interceptor-3hdd-1u-case - Video - Raspberry Pi Gaming PC: youtube.com/watch?v=NsfVI8s2gaI - Wisgate Connect: rakwireless.com/en-us/products/wisgate-connect - EDATEC CM4 Media: https://edatec.cn/en/elpc/cm4-media.html - EDATEC CM4 Nano: https://edatec.cn/en/elpc/cm4-nano.html - EDATEC CM4 Sensing: https://edatec.cn/en/elpc/cm4-sen.html - EDATEC CM4 Industrial: https://edatec.cn/en/elpc/cm4-ind.html - EDATEC CM4 IO Computer: https://edatec.cn/en/elpc/cm4-io-comp.html - Zymbit Secure Edge Node D35: store.zymbit.com/products/secure-compute-node-d35 - Chipsee 10.1" Industrial Panel PC: chipsee.com/product/ppc-cm4-101 - PiKVM v4 Kickstarter: kickstarter.com/projects/mdevaev/pikvm-v4 - Subscribe to Geerling Engineering: youtube.com/c/GeerlingEngineering - Cytron CM4 Maker Board: cytron.io/c-raspberry-pi/c-raspberry-pi-main-board/c-raspberry-pi-cm/p-cm4-maker-board-and-kitsSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#RaspberryPiContents:00:00 - Ethernet and HDMI on a Hard Drive?00:18 - Axzez Interceptor 1U NVR01:47 - WisGate Connect03:12 - EDATEC's industrial computers05:50 - Zymbit's Secure Edge Node D3509:17 - Chipsee Industrial Panel PC10:53 - PiKVM v411:11 - Cytron CM4 Maker Board
YouTube Studio / Office Tour! (early 2023) Jeff Geerling 2023-03-28 | I love watching *other* people's studio and office tours, so here's mine.Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineeringMentioned in the video (in order of appearance):Ceiling camera mount: youtube.com/watch?v=x-NmktQ9nBESony a6600 amzn.to/3JOvZPMSony 24mm 1.8 amzn.to/40mpBpMSony 16-55G 2.8 amzn.to/3nlVZu1Glide Gear TMP75 Teleprompter amzn.to/3MfAnKzManfrotto Magic Arm 196B-2 amzn.to/3LXA4n9Sennheiser MKE600 Shotgun Microphone amzn.to/3TRMSxwLogitech Brio Webcam amzn.to/3ZfhbiMXBox Controller amzn.to/3ntSkusATH-M20X Headphones amzn.to/3JSeNJ33D Printed Controller Holder: thingiverse.com/thing:30194803D Printed Headphone Hook: thingiverse.com/thing:31540132U Gaming PC Build: youtube.com/watch?v=lJDmKYEfVekMac rackmount video: youtube.com/watch?v=FG--PtrDmw4LG 4K Monitor amzn.to/3lOvIEoElgato Stream Deck amzn.to/3KecIbEAquara Zigbee switch amzn.to/42OlHI4Libre Computer Le Potato amzn.to/3JVeRaWAirGradient CO2 Sensor: airgradient.com/open-airgradient/kitsSonoff S31 Plug amzn.to/3TTNiTZShelly Plug US amzn.to/3zdWEk33D print SD Holder thingiverse.com/thing:3910829Apple Magic Keyboard amzn.to/3nq7aCeApple Magic Trackpad amzn.to/3TXO5TZGoPro Hero 7 Black amzn.to/3lLqsS3Monster 4090 Gaming PC Build: youtube.com/watch?v=hsp-CimwNK4LTT Screwdriver: lttstore.com/products/screwdriverKlein mini torx screwdriver amzn.to/3nioGYQKlein precision screwdriver amzn.to/42Er5xcPilot V5 amzn.to/40sGPBZPetabyte Pi Project Video with Storinator 60XL: youtube.com/watch?v=BBnomwpF_uYManfrotto 200PL plate amzn.to/3nqfJNeUnder desk keyboard tray amzn.to/3ZpeviHRazer Huntsman TKL Keyboard amzn.to/3zejzvKTrendnet 2.5 Gbps Switch amzn.to/40K6QwaMikroTik 10 GbE switch amzn.to/3JTT7fKUplift Standing Desk legs: amzn.to/3FWSlgGTissue Box wall mount amzn.to/3TOqOUq2017 Eclipse: jeffgeerling.com/blog/2017/photographing-2017-total-solar-eclipse2024 Eclipse: solarsystem.nasa.gov/eclipses/2024/apr-8-total/overviewElgato Key Light amzn.to/3JR9JEWElgato Key Light Air amzn.to/42OH8Zi4K Blackmagic monitor amzn.to/42GvyQ9Explaining Computers BTS: youtube.com/watch?v=176aHXO1PwcPresonus Eris E3.5 Monitors amzn.to/3Zt4jp7Velcro cable straps amzn.to/3ngEDibUlanzi magnetic RGB lights amzn.to/3Zt59lLGorillaPod Mini amzn.to/40p6StIPliersrack II amzn.to/3U5t4qJWestcott 6" ruler amzn.to/3zeAbDuHakko FX-901/P portable soldering iron amzn.to/3JONSOlHakko CHP PN-2007 Precision pliers amzn.to/42Kt4QLiCrimp SN-28B crimper amzn.to/3Zi7vnLHakko CHP PN-20-M Micro pliers amzn.to/3KgriPSDOWELL Micro flush cutters amzn.to/3ZphVlwViltrox VL-200T video light amzn.to/3G0quwiPelican Air 1535 amzn.to/3Kf1oftPioneer Blu-Ray Drive amzn.to/3LYcMh33D Printing my Grandpa: youtube.com/watch?v=7-om1dxKbN4Fiber Optic Light amzn.to/3Kcb5LMNeewer blue/green screen amzn.to/3Kb9tBTFlipper Zero https://flipperzero.oneiFootage Slider amzn.to/40eEvOVAputure MT Pro Light amzn.to/3KfAFzCDJI RSC 2 Gimbal amzn.to/40FkWiDGlide Gear TMP100 Teleprompter amzn.to/40otE4XParrot Teleprompter 2 amzn.to/40qBxqOAll-SSD NAS Build Video: youtube.com/watch?v=xvE4HNJZeIgElrond Storage Backplane Video: youtube.com/watch?v=jOU-NDDyyuYAtomos Ninja V amzn.to/40IonFbHoney-Can-Do Shelving amzn.to/3FW95VeWindows Arm Dev Kit: youtube.com/watch?v=I3wmp9mstFMFastenerLine.com screw and nut thread checker amzn.to/3nua2hqManfrotto MT190XPRO3 Tripod amzn.to/3M1YiNcManfrotto 128RC Fluid Head amzn.to/3TOzavgManfrotto 3001BN Tripod amzn.to/3FXTV1OJoby Gorillapod 3K amzn.to/3FTOkK33D printed battery holders: printables.com/model/246843-pegboard-battery-dispensersZoom F2 recorder amzn.to/3zeLtYsRode Wireless Go II Lav mics amzn.to/3z9OQjnLumeCube amzn.to/3njsGZ4Zoom H6 amzn.to/3U5A8DLNeewer dual-camera adapter amzn.to/3lM7b2HManfrotto vertical bracket Q2 amzn.to/40lv4NvSmallRig mini magic arm amzn.to/42LSNIsManfrotto PIXI Mini amzn.to/3nqmqiuDehlongi 1500W space heater amzn.to/3TOKLuc#Studio #Tour
Raspberry Pi fixed the rolling shutter problem Jeff Geerling 2023-03-09 | Raspberry Pi's new Global Shutter Camera is extremely useful for machine vision, but it comes with a tradeoff...Raspberry Pi sent me the camera tested in this video but did not offer any form of sponsorship (monetary or otherwise), nor did they have any input into the contents of this video. See my sponsorship policies here: github.com/geerlingguy/youtube#sponsorshipsMentioned in this video: - Raspberry Pi Global Shutter Camera: raspberrypi.com/products/raspberry-pi-global-shutter-camera - How a TV Works in Slow Motion - The Slow Mo Guys: youtube.com/watch?v=3BJU2drrtCM - How the Germans Measured Milliseconds MECHANICALLY: youtube.com/watch?v=Q07CTj4fUeYSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#RaspberryPiContents:00:00 - What is Rolling Shutter?01:12 - The Global Shutter Camera02:05 - Why does it matter?02:34 - One big difference
The RISC-V Revolution has begun! Jeff Geerling 2023-03-03 | This single board computer could start a revolution in the industry! Or so some people think.What makes it tick? And will this board bring RISC-V to the mainstream—at least for hobby computing?Mentioned in this video: - StarFive VisionFive 2: starfivetech.com/en - More test results on GitHub: github.com/geerlingguy/sbc-reviews/issues/10 - AMD RX 6700 XT working on HiFive Unmatched: riscv.org/news/2021/07/rene-rebe-patches-the-linux-kernel-for-worlds-first-look-at-a-radeon-rx-6700xt-on-a-risc-v-pc-gareth-halfacree-hackster-ioSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#RISCV #LinuxContents:00:00 - RISC-V Business01:36 - Initial experience03:13 - How fast is it?05:08 - Bumps in the road05:57 - NVMe and storage oddities06:36 - GPU and hardware acceleration07:27 - Using and abusing PCIe09:10 - Efficiency09:42 - A prime opportunity
Live: AMD PC upgrade, with 10 GbE in an M.2 slot! Jeff Geerling 2023-02-23 | Time for an upgrade! This one will have a strange M.2 NIC that supposedly gives 10 GbE in one of the NVMe slots!Here are the parts I used in my build: - Open Benchtable: openbenchtable.com - ASUS TUF GT501 Case: amzn.to/3y58Sep - ASUS ROG Strix B650E-F Gaming WiFi AM5 Motherboard: amzn.to/3XTQKOW - AMD Ryzen 9 7900x 12-core, 24-thread CPU: amzn.to/3xJaYQT - Noctua NH-U12A chromax.Black 120mm CPU Cooler: amzn.to/3xOdghq - G.Skill Flare X5 DDR5-6000 CL36 RAM: amzn.to/3m3GTIX - KIOXIA XG8 2TB SSD: amzn.to/3xLGXjj (XG7 listed on Amazon) - Gigabyte GeForce RTX 4090 Gaming OC 24G GPU: amzn.to/3xKH1Qj - CableMod 12VHPWR Angled Adapters: store.cablemod.com/12vhpwr-angled-adapter - Thermaltake Toughpower GF3 1200W Modular PSU: amzn.to/3ExmMJB - HD Audio Extension Cable: amzn.to/3Sm3sF4 - Innodisk EGPL-T101 10 GbE M.2 NIC: innodisk.com/en/products/embedded-peripheral/communication/egpl-t101 - I bought it for $185 from WDL Systems early last year, and it took months to ship!I also referenced the following in the course of my build: - Flashing the ASUS Motherboard BIOS: jeffgeerling.com/blog/2023/trying-every-combination-flash-my-asus-motherboards-bios - Moving my PC into my rack in a 2U case: jeffgeerling.com/blog/2023/moving-my-pc-my-rack-2u-case - I had to return my AMD RX 7900 XTX Cooler: jeffgeerling.com/blog/2023/how-many-amd-rx-7900-xtxs-are-defectiveSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineeringContents:00:00:00 - It's not really NVMe00:05:02 - It's a 10G M.2 NIC!00:05:36 - Stripping down the old PC00:17:55 - New Parts - 42% for Ubuntu00:25:42 - Huge GPU, new motherboard too00:36:49 - Kinky motherboard cabling00:48:15 - PSU cabling00:52:46 - Innodisk EGPL-T101 10G M.2 NIC install01:00:49 - GPU Support Bracket? Nah.01:04:17 - 2.5 Twizzlers (unit of measurement)01:10:36 - Release the Magic Smoke!01:13:06 - Debugging01:17:02 - POST! (And yes, it's Ubuntu)01:22:22 - 10G NIC Testing (Windows)01:27:05 - Not 10 Gbps! (More Debugging)01:38:55 - 4090 goes back in! (bonus AMD Eco mode rant)01:49:50 - 4090 Debugging (BIOS settings)01:57:09 - Fast boot was the problem? (Thanks live chat!)01:57:30 - Summary and next debugging steps
Hacking the Williams! Making a good screwdriver better #shorts Jeff Geerling 2023-02-17 | Thanks to John Zanussi, you can hack your Williams WRS-1 Ratcheting Screwdriver to have a bonafide bitholder!Here's the 3D file: printables.com/model/400661-williams-screwdriver-bit-holderAnd my 3D Printer: amzn.to/3S7ZoIdAnd how I set up my 3D printer: github.com/geerlingguy/3d-printingSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering
Slimming down to 2U! SFF Rackmount Gaming PC Jeff Geerling 2023-02-16 | HUGE thanks to Micro Center for sponsoring this build! Here are links for their offer:New Customer Exclusive - $25 Off ALL CPU's: https://micro.center/ywwShop Micro Center's February BYO Deals: https://micro.center/fbiCheck out Micro Center's Custom PC Builder: https://micro.center/b9oSubmit your build to Micro Center's Build Showcase: https://micro.center/0jnParts used in this build (some links are affiliate links): - MyElectronics' 2U Mini ITX case: https://www.myelectronics.nl/us/19-inch-2u-mini-itx-case-short-depth.html - Intel i5-13400 CPU: amzn.to/3K5bgJ1 - ASRock Z790M-ITX WiFi Motherboard: amzn.to/3YOnLwF - CORSAIR Vengeance DDR5-5200 RAM with XMP: amzn.to/3lDqzi3 - LIAN LI SP 750 SFX PSU: amzn.to/3lGtUg4 - PNY Nvidia RTX A2000 12GB graphics card: amzn.to/3YobvmV - be quiet! Pure Wings 80mm BL044 Case fans: amzn.to/3S23mCd - Noctua NH-L9i-17xx Low-Profile CPU cooler: amzn.to/3EaWKMi - 3.5mm Keystone Audio Jack: amzn.to/3YRPIUA - Nanxudyj 3.5mm 1ft Audio Cable: amzn.to/3Ea26HD - KIOXIA XG8 NVMe SSD: americas.kioxia.com/en-us/business/ssd/client-ssd/xg8.htmlAnd here's a link to the build from Micro Center (excluding the things I bought separate): microcenter.com/site/content/custom-pc-builder-intel.aspx?load=fe3f5ada-d5a2-4773-a2f3-28a25a21f8c5Also mentioned in this video: - LTT Personal Rig Update (Late 2021): youtube.com/watch?v=TgRXE9mUHJc - LTT Heating my pool with computers: youtube.com/watch?v=4ozYlgOuYis - It BROKE! LTT Screwdriver 6-month review: youtube.com/watch?v=uwoc6c4PMfUSupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#Sponsored #MicroCenter #HomelabContents:00:00 - Too much power?00:48 - Short-depth 2U rackmount case01:19 - Micro Center!01:58 - SFF ask the expert04:07 - Case closed... and opened!05:08 - Assembling the motherboard08:37 - I actually showed the thing!09:00 - It's coming together10:35 - Front panel USB and a GPU to see12:43 - It's a lot heavier for its first boot13:46 - No case is perfect14:52 - Quieter AND faster!15:34 - Gaming at 1080p16:20 - Other SFF options and another build
It BROKE! Linus Tech Tips Screwdriver (6 months later) Jeff Geerling 2023-02-09 | Has the @LinusTechTips Screwdriver lived up to it's hype? Is it worth the steep price? Let's find out.Mentioned in this video (some links are affiliate links): - My original LTT Screwdriver review: youtube.com/watch?v=l40dncKq38s - PB Swiss 8510R-100: amzn.to/3U0ae3R - Snap-On SSDMR4B: shop.snapon.com/product/Standard-Handle/8-3-4%22-Ratcheting-Standard-Screwdriver-(Black)/SSDMR4B - LTT Screwdriver: lttstore.com/products/screwdriver - Wera Kraftform Kompakt 27: amzn.to/3RnCPhH - Williams WRS-1: amzn.to/3cOtosH - Amazon Basics 12-in-1 ($15.38): amzn.to/3esqv18 - @TheWongReviewer's video (broken bit holder): youtube.com/watch?v=E5fVdtbTiNg - @PlasconPlastics's video (reaction to launch): youtube.com/watch?v=ZDPeSWzU9LE - @Jayztwocents LTT Screwdriver drop: youtube.com/watch?v=XyqGa4DZeKU - @GeerlingEngineering Exploring a 1 MILLION Watt FM Tower (with my Dad): youtube.com/watch?v=6_u8x8V4YYsCreator Edition LTT Screwdriver Sightings: - @ServeTheHomeVideo (Light Blue): youtu.be/h7U4fCj_Pos?t=334 - @CoalitionGaming (Light Blue): youtube.com/watch?v=ORn_Sdr-uHE - @snazzy (Light Blue): twitter.com/SnazzyQ/status/1568371889676120064 - @mkbhd (Red): youtu.be/ltD4TVN9wAY?t=104 - JayzTwoCents (Red): youtu.be/XyqGa4DZeKU?t=130 - Jordan Ash (Red): instagram.com/p/CktncAzNLmd/?igshid=YTgzYjQ4ZTY%3D - @paulshardware (White): youtu.be/68U6MD-VOfM?t=704 - Jeff Geerling (White): (my earlier video) - @austinevans (White): youtu.be/7pzoRkQh8Z0?t=579 - @ElectroBOOM (Yellow): youtu.be/_qB-JsmQBto?t=467 - @TastyPC (Violet): twitter.com/TastyPCTV/status/1595414821842948096 - @geraldundone (NOT Purple): youtu.be/0TAsPxymM8E?t=545 - @LGR (not Creator Edition, though): youtu.be/1xspMdiXFCY?t=1264Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineeringContents:00:00 - Fish-flavored rat poison00:52 - Marketing02:12 - A Little Bit annoying03:17 - Ratchet and Clank04:05 - Thanks, I hate it06:28 - Just a Megapro rebadge?10:01 - Durability11:08 - The most viewed part of this video12:16 - Linus should've watched that part, but he's in the comments12:53 - Hi Dad14:03 - A little noncommital
I BROKE IT! LTT Screwdriver update #shorts Jeff Geerling 2023-02-04 | Subscribe — I'll post a longer video with a lot more depth next week!Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering
WAY faster than a Raspberry Pi—but is it enough? Jeff Geerling 2023-02-01 | The Rock 5 model B is certainly a beast, as far as ARM SBCs go.Mentioned in this video (some links are affiliate links): - Rock 5 model B: wiki.radxa.com/Rock5/5b - Orange Pi 5: amzn.to/3kZAv5f - ExplainingComputers' review of the Rock 5: youtube.com/watch?v=w85QTDPp-4Q - Linux Recompile shirt: redshirtjeff.com/listing/linux-recompile-shirt?product=211 - M.2 to PCIe adapter (x1): amzn.to/3HOqOPW - Innodisk 10G M.2 NIC: innodisk.com/en/products/embedded-peripheral/communication/egpl-t101Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguy2nd Channel: youtube.com/c/GeerlingEngineeringContents:00:00 - 7th-gen speeds01:17 - Quick overview02:46 - USB-C PD is as confusing as ever04:46 - Finally booted05:39 - More efficient than Pi. WAY more.07:25 - Faster IO than Pi. WAY faster.08:21 - Trying out WiFi 609:06 - Now THIS is pod racing!11:07 - CPU Snot?13:04 - vs Raspberry Pi 413:49 - vs Orange Pi 514:36 - vs Khadas Edge 215:36 - vs Tiny PC16:05 - Value proposition
ARM yourselves! The Compute Blade is here. Jeff Geerling 2023-01-23 | It won't turn you into a ninja, but it will help you build a Pi cluster.Check out the Compute Blade on Kickstarter:kickstarter.com/projects/uptimelab/compute-blade?ref=bfyfmeMentioned in this video: - Compute Blade: computeblade.com - My open source Pi Cluster project: github.com/geerlingguy/pi-cluster - Radxa CM3 and Pine64 SOQuartz review: youtube.com/watch?v=aXlcNVKK-7Q - BigTreeTech CB1 Review in Livestream: youtube.com/watch?v=Krpac-MaD5s - Compute Blade alpha review: youtube.com/watch?v=zH9GwYZu_aESupport me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineeringContents:00:00 - This is the Compute Blade00:34 - A Slice of Pi03:35 - Why blade?06:15 - Pine64's Blade06:58 - Clone Wars10:17 - Kickstarter and price
These Compute Blades are INSANE! #shorts Jeff Geerling 2023-01-19 | The Compute Blade is here—the coolest way to build a Pi cluster on your desk or in your rack! But what if you can't find a Compute Module 4?Find out more at computeblade.com — and subscribe to seem my full video next week!Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering
Testing out the NEW Raspberry Pi Camera Module 3 Jeff Geerling 2023-01-09 | Raspberry Pi just announced the Camera Module 3. I built a camera based on @Kevin McAleer's PIKON design.Check out the Camera Module 3: raspberrypi.com/products/camera-module-3Mentioned in this video: - Kevin McAleer's PIKON: youtube.com/watch?v=4BEjKUK8DSQ - Pi Camera project on GitHub: github.com/geerlingguy/pi-camera - Ender 3 V2 (my 3D Printer): amzn.to/3ikDRPk - Twidec 12mm push button (for shutter): amzn.to/3ijIj0C - Waveshare 3.5" Touchscreen: amzn.to/3ZdFleyRaspberry Pi provided the three Camera Modules featured in this video but did not pay for or have any influence over the content of this video.Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com2nd Channel: youtube.com/c/GeerlingEngineering#RaspberryPi #CameraContents:00:00 - A huge upgrade00:44 - Camera Module 3, four ways01:53 - An open source camera design03:03 - Assembly04:22 - Rigging it up05:05 - Let's test it out!06:51 - Wide Angle and sharpness08:08 - Autofocus in video08:41 - You wouldn't SSH into a GoPro
WiFi 6E takes Pi to 1.5 GIGABITS—faster than my Mac! Jeff Geerling 2023-01-05 | A Raspberry Pi is faster than the latest M2 MacBook Air? You bet it is! And it's not clickbait—watch the video to learn about how WiFi 6E is a major upgrade over WiFi 6, and what might be in store for WiFi 7!Mentioned in this video (some links are affiliate links): - Netgear WAX630E WiFi 6E AP: amzn.to/3vBZmhg - Netgear WAX620 WiFi 6 AP: amzn.to/3VMEBtZ - Intel AX210 M.2 A+E WiFi 6E adapter: amzn.to/3CqRFi2 - MZHOU Wireless M.2 to PCIe adapter: amzn.to/3ZaXnyd - FM Supertower Tour: youtube.com/watch?v=6_u8x8V4YYs - Subscribe to Geerling Engineering: youtube.com/c/GeerlingEngineering - How to use Intel AX210 on Raspberry Pi: pipci.jeffgeerling.com/cards_network/intel-ax210-wifi-6e.html - Blog post: How to get 6 GHz WiFi on the Pi: jeffgeerling.com/blog/2022/getting-15-gbps-wifi-6e-on-raspberry-pi-cm4Support me on Patreon: patreon.com/geerlingguySponsor me on GitHub: github.com/sponsors/geerlingguyMerch: redshirtjeff.com#RaspberryPi #WiFi #HomelabContents:00:00 - No, it's not clickbait01:11 - WiFi 6 is pretty good02:16 - But 6E is even better02:48 - The WAX630E is flexing03:47 - Config isn't perfect04:54 - M2 vs Pi05:20 - 6E requires even more upgrades06:15 - 1.5 Gigabits!06:57 - QAM, MU-MIMO, and other RF magic07:43 - Hi Dad!09:42 - Is 6E for me?
