Is this really possible?: SANDING Bowls at my Driil Press-Learn to turn with Sam learn2turnwithsam 2024-06-09 | In this video, Sam sands some bowls he had previously completed. These bowls were completed for a local charity event that will be held later in the year. He takes bowls in various stages of completion and finishes them.There is a sister video showing how he completed these bowls ready for sanding. The link is below thank you for watching and please subscribe to my channel.youtu.be/5fCSzfLO-aY (turning the bowls video) Sam AngeloChapter time code: simply click on the time and jump to the desired topic during the video.00:00 Introduction to this video00:44 A little about dust collection00:55 My drill press set up for sanding01:18 Sanding bowls that have been previously turned02:11 Explaining the procedure for finishing these bowls 03:14 Close-up of my dust collection set up04:42 Sanding continues05:38 Conclusion and thank you for watching
How I Color a Hollow Form (Burial Urn) Wood Turning with Sam Angelo learn2turnwithsam 2024-10-13 | In this video, Sam shows "coloring options" for a Wood Turning hollow form. This piece could also be used as a burial urn. He first starts by adding dye from the inside and then finishes up with an airbrush. As a bonus, he adds dragonflies and butterflies to his peace. Please subscribe and leave a comment thank you Sam Thanks for watching my videos- also see chapter time codes below, just click on the time and jump to the desired topic in the video Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwood... Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Look • The Robust American Beauty Lathe: A C... For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo • Robust Scout lathe Tour ~ Sam AngeloChapter time codes have been added to this video-just click on the time and jump to the desired topic. Chapter time codes 00:00 Introduction00:36 The project explained01:22 Coloring begins02:26 This is the dye I use for coloring03:31 Coloring from the inside05:53 Coloring continues07:25 Adding green 08:23 Coloring is almost complete08:33 Using an airbrush on the hollow form11:11 Adding dragonflies and butterflies12:40 Adding another butterfly14:07 So really big dragonfly added14:32 Conclusion, and thanks for watching
How I turned this Off Center Winged Bowl (Without getting Hurt) learn2turnwithsam Sam Angelo learn2turnwithsam 2024-10-10 | Watch as Sam turns this off-center winged bowl from honey Locust. He encounters some challenges along the way-watch as he completes this project that is both scary and exciting, but it turns out very well. Please subscribe to this channel and enjoy my weekly videos on YouTube. Please open the link below to my new YouTube channel for beginning wood turners (or anyone) SUBSCRIBE-SHARE-AND LEAVE A COMMENT. / @samangeloturns I am an Authorized ROBUST lathe dealer: contact me with any questions samandcheryle@gmail.com If you are interested in an American Beauty Lathe, I have two in the stock Lathe program and they are ready to ship- avoid the delays and order one now.Let me know if you have any questions you can contact me at; samandcheryle@gmail.com Thanks, SamBuy Me a Coffee...link buymeacoffee.com/SamAngelo
Turning a Bud Vase From a Paper Birch Log Woodturning with Sam learn2turnwithsam 2024-10-06 | Sam turns a bud vase, sometimes called a weed pot, from a small log of Paper Birch. This is a really fun project for anyone who enjoys turning on a wood Lathe. Watch as he takes you through this simple project from beginning to end-resulting in a very rustic container for weeds..... Or a beautiful flower. Thanks for watching my videos and please subscribe thank you Sam Tune in to my new channel learn2turnwithsam for more weekly videos from sam angelo. / @samangeloturns Please contact me with any questions at Samandcheryle@gmail.comThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwood... Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Look • The Robust American Beauty Lathe: A C... For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo • Robust Scout lathe Tour ~ Sam Angelo
Trent Boschs Laser!!!! A closer look turning with Sam learn2turnwithsam 2024-10-05 | Sam looks at the Laser Bar by TRENT BOSCH Tools. This tool works perfectly with his stabilizer, also shown in the video. Links for both below. This video is not a full scale review but simply a close up look at a really fine laser-it is high-quality and well-made and works perfectly. I have also included below links to my two videos on Trent's stabilizer. Please enjoy my videos and don't forget to subscribe thank youStabilizer Laser Barstrentboschtools.com/product-category/laserbarsHollowing Tool Stabilizerstrentboschtools.com/product-category/stabilizersMy videos on the stabilizer:Demonstrating the Hollowing Tool STABILIZER: wyomingwoodturneryoutube.com/watch?v=dkVkQscIXtk&t=179sReviewing the stabilizer by Sam Angelo youtube.com/watch?v=Ea7WzvWXaww
I NEED This Drive Block For Bowls Woodturning with Sam Angelo learn2turnwithsam 2024-10-03 | Sam makes a drive block for finishing the foot of Bowls-this may be a must have item for your shop. Follow step-by-step as he makes this and then works on the bottom of a Australian willow bowl. Please subscribe and watch more videos on my channel, wyomingwoodturner Please contact me with any questions at Samandcheryle@gmail.comThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwood... Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Look • The Robust American Beauty Lathe: A C... For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo • Robust Scout lathe Tour ~ Sam Angelo
How To Mill a Bowl Blank from a HALF Log Woodturning with Sam Angelo learn2turnwithsam 2024-09-28 | In this video, Sam shows the proper way to mill a cross-grain bowl from a small log. He starts by splitting the Log lengthways with the chainsaw and continues to cut the bowl blank round on his bandsaw. Keep in mind this is not an end grain Turning, but a cross grain bowl. Thanks for watching my videos please subscribe and share my channel-at the end of this description or chapter time codes that will take you to a specific topic in the video.Thanks, Sam AngeloAre you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwood... Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Look • The Robust American Beauty Lathe: A C... For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo • Robust Scout lathe Tour ~ Sam Angelo
Selecting the Best Chainsaw!!! Electric? Gas? Battery? with Sam Angelo learn2turnwithsam 2024-09-11 | In this video, Sam takes a look at three types of Chainsaws: electric, gas, and battery powered? He covers the basic features of each saw and leaves it to the viewer which one might be a good fit for his or her work shop. It all depends on how a particular saw is used and what your needs are as you prepare wood to turn on the Lathe. Thanks for watching my videos- please subscribe and share my videos thank you, SamAre you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwood... Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Look • The Robust American Beauty Lathe: A C... For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo • Robust Scout lathe Tour ~ Sam Angelo
MILLING A LOG for Bowl Blanks.... using a CHAINSAW with Sam Angelo learn2turnwithsam 2024-09-06 | In this video, Sam shows some basic chainsaw operations for preparing bowl blanks from a log. He explains his approach for making the first cut through the pith- to showing areas from which to cut future bowl blanks. Please like and subscribe to my channel and remember to leave a comment. Thank you Sam Thanks for watching.Robust Lathes!!!!Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwood... Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Look • The Robust American Beauty Lathe: A C... For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo • Robust Scout lathe Tour ~ Sam Angelo
Embellished Hollow Form:Colored From the INSIDE!!!! with Sam Angelo learn2turnwithsam 2024-08-29 | In this video, Sam embellishes a small hollow form by coloring it from the inside......What??? Yes, watch the video to see how he does this. First he must thue up the hollow form-inside and out, and then proceed to color and finish the piece. Also watch for the follow up video on this in which Sam turns a lid and a finial with hand chase threads, also on this channel learn2turnwithsam Thanks for watching my videos- Sam Also visit my other YouTube channel wyomingwoodturner and please subscribeAre you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwood... Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Look • The Robust American Beauty Lathe: A C... For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo • Robust Scout lathe Tour ~ Sam Angelo
Turned Crotch wood Walnut Bowl with Sam Angelo learn2turnwithsam 2024-08-23 | In this video, Sam turns a beautiful walnut bowl from crotch wood. The wood begins as a log that is very green (wet). This is a Once-Turned bowl: it is not rough turned but turned in one sitting. This requires the bowl to be turned thin. Sam starts by splitting this log into two.....In a sister video he turns a winged bowl from the other side of the log. Here is a link to that video.: youtube.com/watch?v=Q2zWu7Sc9dk&t=2sPlease subscribe to my channel and share my videos. Thanks for watching.Robust Lathes!!!!Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwood... Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Look • The Robust American Beauty Lathe: A C... For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo • Robust Scout lathe Tour ~ Sam Angelo
Coring Bowls.... The lost step-Wood Turning with Sam Angelo learn2turnwithsam 2024-08-17 | Sam continues to core bowls from a larger blank of wood. He demonstrates one additional step that is helpful for the drying process. After the bowls are cored initially, he turns the bowl blank so the wall thickness is even and adds a tenon that can be used later for chucking up the bowl blankThanks for watching my videos- please subscribe to my channel and share my videos.Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwood... Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Look • The Robust American Beauty Lathe: A C... For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo • Robust Scout lathe Tour ~ Sam Angelo
Why Practicing is Important for Woodturners? WoodTurning with Sam Angelo learn2turnwithsam 2024-08-14 | In this video, Sam shows his approach for practicing on the Lathe.With a blank of walnut, he demonstrates two or three tools he uses when practicing and at the end turns a little finial suitable for the top of a box or hollow form. Please subscribe to my channel and share my videos. Thank you Sam Thanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwood... Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Look • The Robust American Beauty Lathe: A C... For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo • Robust Scout lathe Tour ~ Sam Angelo
My Favorite Spindle Tools with Sam Angelo learn2turnwithsam 2024-08-12 | Sam shows a variety of his favorite Spindle tools that he uses on the Lathe. He puts each tool to use on a nice walnut spindle. Each woodturner will have his or her own Selection of tools. Sam shows how he uses each which include parting tools, spindle gauge, skew chisel, and even his point tool. I am an Authorized ROBUST lathe dealer: contact me with any questions. I have an American Beauty lathe in my stock program ready to ship. Let me know if you're interested. samandcheryle@gmail.com Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwood... Send me a comment or question via e-mail: @---- samandcheryle@gmail.comHere is a list of chapter time codes-just click on the topic and jump to the desired topic:00:00 Introduction00:43 Marking Centers01:57 Chucking up between Centers03:14 Spindle roughing gouge04:43 Skew chisel06:46 A warning about using tools incorrectly 08:26 Using a Scroll check10:24 Beading and parting tool14:51 Spindle gouge17:37 Detail gouge18:34 Narrow parting tool21:44 Diamond parting tool22:56 Point tool23:44 ConclusionThanks For watching Sam Angelo
Finish Turning a Green Walnut Bowl learn2turnwithsam 2024-08-04 | In this video, Sam turns a wet log into a bowl in one day. He mills the wood at the bandsaw and then proceeds to turn this walnut log to completion. It is necessary to turn this bowl 3 mm thick (thin) so the wood does not split. See this step-by-step process as Sam turns this beautiful piece of walnut into a 9 inch bowl. For more of my videos subscribe to my channel learn2turnwithsam.For Ron Brown's Tools visit the link below: longworthchuck.com
Why Rough Turning is IMPORTANT in Woodturning with Sam Angelo learn2turnwithsam 2024-07-28 | Turning "Green" or wet wood is an important process in woodturning. In this video Sam Angelo shows how to start with a wet log and prepare a bowl blank for drying. Please subscribe to my channel-share-and comment....Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.
Tru Arc by Robust: looking Close-Up, at a very fine Tool with Sam Angelo learn2turnwithsam 2024-07-21 | Sam looks at the Tru Arc tool produced by Robust Tools LLC. He unboxes this very interesting tool and shows the components available. The Tru Arc produces a perfect curve on the inside of a bowl. This is definitely not a roughing tool, but one designed with the result of a perfectly curved surface and one that is very difficult to produce by using hand tools. "Tru-Arc is a captive turning system that lets you cut clean and consistent lines on the insides of shallow bowls and platters." Brent EnglishBelow are links to the video published by Brent English of Robust tools,As well as a longer version I published on my YouTube channel wyomingwoodturner. Video Produced by Brent English:youtube.com/watch?v=O0TL44tJvO4Longer version of my Tru Arc video: youtu.be/AaetVfj8ek4Thanks for watching my videos- Please share, subscribe, and leave a comment.Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.com
Why I use a Bottom Feeder Bowl Gouge LEARN 2 TURN WITH SAM learn2turnwithsam 2024-07-16 | In this video, Sam describes in simple terms why a bowl gouge grind is an important tool to have in your shop. He compares a 60º nose angle with a 40° nose angle on two bowl gouges. He continues by showing these tools in action on a small bowl. He concludes that it might be important to have both tools in your kit. Please subscribe to my channel, leave a comment, and share my videos thank you, Sam
Rough Turned Wooden Bowl-Turned by Cheryle Angelo (Woodturning with Sam Angelo) learn2turnwithsam 2024-07-14 | In this video, I show my wife Cheryle the steps required to rough turn a bowl from Green wood. We had a lot of fun making this video and Cheryl did a great job. This is a very important video for new Turners or anyone teaching someone how to rough turn a bowlPlease subscribe to my channel learn2turnwithsam, leave a comment and share my videos.See the chapter time codes below to find the topic you would like to reach-just click on the time listed. Visit My Channel, wyomingwoodturner and subscribe.... youtube.com/@WYOMINGWOODTURNERChapter time codes-just click on the time and jump to the desired topic.00:00 Introduction00:39 The project explained01:10 Milling at the bandsaw02:37 Preparing the bowl blank04:27 Attaching the bowl blank to a screw chuck06:04 Turning the bottom of the bowl blank07:40 Creating a tenon09:07 More work on the bottom of the bowl10:00 Reversing the bowl into a scroll chuck 10:26 Truing up the top of the bowl11:26 Begin Hollowing the bowl blank12:38 Establishing the wall thickness13:46 More hollowing14:17 Checking the depth of the bowl16:06 Finishing with a scraper16:44 Placing the bowl blank into a box with Shavings17:08 Conclusion
Spin Top with a NEW Design (String and Launcher) with Sam Angelo learn2turnwithsam 2024-07-07 | Sam turns a beautiful top from spalted tamarind. He encounters a few hurdles along the way, but ends up with a very nice spin top that he was very happy with. Please subscribe to my new channel learn2turnwithsam (You are watching it now). Share my video and hit that like button.Also watch more videos on my channel Wyomingwoodturner on YouTube.youtube.com/channel/UCRZxyT3UUS8spkIZDAsaFnAIf you have any interest in an Robust-American Beauty, please contact me for details. I have one that can ship within a week---if you're tired of waiting for that brand new American made wood lathe. Contact me @ samandcheryle@gmail.com
Why is Sealing Green Wood Important Wood Turning with Sam Angelo learn2turnwithsam 2024-07-04 | In this video, Sam talks about why turning green wood is an important way to approach Turning projects. The first step is sealing the wood to preserve it from splitting and cracking. Sealing wood is a simple process that anyone can do. Please subscribe and share this video Watch this video and find out how......For more of my YouTube videos watch my other channel wyomingwoodturner youtube.com/channel/UCRZxyT3UUS8spkIZDAsaFnAFor more information on drying wood and sealing wood click on the links below.From a log to a completed bowl playlist: youtube.com/watch?v=wCDR_vsdOyA&list=PLL5-IWEcq6B-hymSlYZxdWTeVPTFRNe9Z&pp=gAQBiAQBDrying Wood playlist: youtube.com/watch?v=Cv-EljgMqTE&list=PLL5-IWEcq6B9-Byv8MSYia087mV8pK-SB&pp=gAQBiAQBNatural edge, Bowls playlist youtube.com/watch?v=xwti9yqa5m0&list=PLL5-IWEcq6B_mARE07x40zXEOXkPYK7uI&pp=gAQBiAQBRobust Lathes for sale: I am an authorized Robust Lathe dealer. If you are interested in the finest American made Lathe, please contact me.- samandcheryle@gmail.com If you are tired of waiting for a Lathe delivery, I have two American Beauty leaves ready to ship.
How to Create a Captive Ring in a Spindle Turning with Sam Angelo learn2turnwithsam 2024-06-30 | In this video, Sam covers his method of developing a captive ring on a spindle turning. He admits there are many ways to do this by using different tools. Watch as Sam demonstrates his step-by-step process of creating a captive ring on a spindle turning.See the list of chapter time codes below. Click on the time and jump to the topic you wish to see. If you're interested in a Robust American Beauty wood Lathe contact me and I'll answer any of your questions. I have two Lathes ready to ship. These are American Beauty lathes that have every accessory available added. These lathes are in the stock Lathe program and are sitting on a shelf ready to be delivered to you- contact samandcheryle@gmail.com.And please subscribe to my new YouTube channel learn2turnwithsamyoutube.com/@samangeloturnsChapter time codes:00:00 Introduction00:23 The project explained00:40 Turning begins01:25 Taking Square corners to round 02:01 Marking the captive rings02:33 Turning begins with a parting tool03:43 Using a spindle gouge 04:15 Creating beads 04:41 Captive ring tool06:03 Sanding06:54 The first captive ring set free07:28 Using different tools08:26 The second captive ring, set free08:59 Conclusion
New spin top learn2turnwithsam 2024-06-25 | Please subscribe to my channel Learn2turnwithsam Thanks very much for watching
How I Complete a Rough Turned Box Elder bowl? With Sam Angelo learn2turnwithsam 2024-06-22 | In this video, Sam picks out an unfinished piece from his stock. He selects a very nice 10 inch wide Box Elder Burl bowl. He runs step-by-step through the process of completing it- an important video for any woodturner.If you're interested in a Robust Lathe, please let me know and I will answer any of your questions. I have two American Beauty lathes ready to ship. Let me know if you want the details on these loaded Robust Lathes.You can contact me at. samandcheryle@gmail.com Thanks-and please subscribe to my video channel learn2turnwithsam.Chapter time codes-just click on the time and jump to the desired area of the video00:00 Introduction01:12 The project explained01:52 Chucking up the bowl02:53 Turning the bottom of the bowl03:05 Work on the tenon05:17 Work on the rim 06:30 Shape the bowl07:23 Reverse the bowl into the Chuck08:53 Clean up the rim09:49 Turn the inside of the bowl11:11 Clean up with the scraper11:55 Using a bottom feeder12:51 Clean up the bottom with a scraper13:35 Applying a finish14:36 Reverse and complete the bottom16:22 Develop a foot on the bowl17:59 Final touches on the foot18:38 Remove the center nib19:42 Conclusion
Mastering The Art Of Turning A Natural Edge Bowl With Sam Angelo learn2turnwithsam 2024-06-12 | In this video, sam shows his process for Turning a natural edge bowl. He will take you step-by-step to the process of mounting the block of wood -turning the outside in the inside, including methods for reverse checking. A very good tutorial on making a natural Edge bowl.Please find the chapter time codes at the end of this description. important points in the video are listed along with a time that you can click on and jump to that topic. Also, please subscribe to my other YouTube channel: LEARN2TURNWITHSAM youtube.com/@UCog9HAb1dcxhdd-ZObBJlsw If you like my channel and wish to support what I do, please buy me a cup-link below:BUYMEACUP LINKbuymeacoffee.com/SamAngeloThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comChapter time codes; just click on the time and jump to the topic listed. 00:00 Introduction to this video 00:36 Explaining a natural edge bowl 01:29 Milling at the band saw 05:04 Attaching the blank to the Lathe08:03 Turning the outside of the bowl11:49 Balancing the bowl blank12:40 Creating the tenon 14:34 Reverse chucking the bowl15:48 Turning the outside of the bowl17:42 Turning the inside of the bowl19:20 Protecting the bark 21:03 Scraping the inside of the bowl21:47 Using the bottom feeder24:02 Reverse chucking once more24:59 Working on the foot26:18 Finishing up with the scraper26:59 Conclusion
Mastering Surface Finishing Techniques For Woodturning With Sam Angelo learn2turnwithsam 2024-06-02 | In this video, Sam covers two options for finishing the surface of a project. One is burnishing and the other is buffing. In this video, he explains the difference and shows examples of each. See the time codes below... Please subscribe to my channel., learn2turnwithsam --- leave a comment, share and like my video thank you very much, SamAlso, Watch my new channel LEARN2TURNWITHSAM and please subscribe thank you LINK- youtube.com/channel/UCog9HAb1dcxhdd-ZObBJlsw / @samangeloturns Are you Looking at the American Beauty wood lathe? I have two in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comChapter time codes: Click on the time and jump to the desired topic 00:00 Introduction to this Video 00:34 The topic explained02:50 Buffing 03:38 Buffing wheels 05:52 Burnishing 06:40 Scorching wood with fire10:07 Results of burnishing11:36 Coloring wood14:53 My Buffing Wheel 16:05 Buffing Compounds 16:51 Buffing my Art work18:07 conclusion
30 INCH WALNUT SLAB Too BIG for my Lathe!!!! Learn 2 Turn With Sam learn2turnwithsam 2024-05-26 | Robust Lathe sale see details below..... Sam was commissioned to turn this 30 inch large walnut piece. It challenged the limits of his sweet 16 but the lathe handled it beautifully. Although Sam did not make this table, he was commissioned to turn two components for it. In the link provided, watch as he turns a very large pedestal for that table. These are must see videos as they show just watch a robust lathe can do. Chapter time codes below: !!!!! Memorial day (Robust Lathe) sale !!!!!! $500 off on any (Robust Lathe) and a free motor upgrade until May 31. Contact me if you have any interest in the best American made Lathe.SAMANDCHERYLE@GMAIL.COM Are you Looking at the American Beauty wood lathe? I have TWO in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwood... Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Look • The Robust American Beauty Lathe: A C... For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam AngeloChapter time codes: click on the time and jump to the desired topic00:00 Introduction to the Video 00:22 The project explained01:01 Attaching a face plate02:07 Layout for the face plate04:05 Adding screws to the face plate06:15 Mounting the project on the lathe07:24 Tool rest position explained 08:15 Begin turning 08:51 Forming a chamfer on the rim09:45 More turning 13:57 A problem encountered while turning 14:57 Layout for the pedestal base16:59 Conclusion, and thanks for watching
(Robust Lathe) sale learn2turnwithsam 2024-05-25 | Contact me if you have any questions about a fine (Robust Lathe)
How I Turned This Odd Shaped Bowl Woodturning with Sam Angelo learn2turnwithsam 2024-05-24 | Watch as I turn this small aspen bowl. It was a challenge to turn this piece because of the shape, but it turned out very nice. Thanks for watching and please subscribe to my channel.Sam Angelo
Walnut pedestal base learn2turnwithsam 2024-05-23 | See the full video on May 26 on my YouTube channel Wyomingwoodturner. 
Finial practice learn2turnwithsam 2024-05-23 | It always helps to practice your skills, no matter what you do Learn2turnwithsam
Wood Turning fail !!! learn2turnwithsam 2024-05-23 | Sometimes things just don’t go your way see more of my videos on Learn2turnwithsam
Turning wood to metal learn2turnwithsam 2024-05-23 | The technique I used on this piece was inspired by Nick Agar a great Turner and demonstrator
A must-see video on Woodturning Tools with Sam Angelo learn2turnwithsam 2024-05-22 | In this video, Sam explains the difference between a bowl gouge and a spindle gouge and shows excellent video footage of each tool in action. Woodturning can be dangerous and safety is an important issue. This video will explain what can go wrong and how to use tools correctly.Thank you for watching and please subscribe to my channel-learn2turnwithsam if you have any questions, please contact me at: samandcheryle@gmail.com And remember I am a Robust Dealer. So let me know if you're interested in a Robust lathe or any of the tools available from Robust Tools LLC. Thanks, Sam Angelo
Tiny bowl. learn2turnwithsam 2024-05-20 | Sam practices by making a small bowl out of scrap wood please subscribe to my channel
